A wall hanging fixing device includes a decoration cover which is provided with a hanging member in its inner side. The hanging member is fixed on a supporting seat in the inner side of the decoration cover with screws. The hanging member is provided with a hanging connection groove which is fit with a supporting member. The fixing device is also provided with a movable member that can move towards or away from the hanging connection groove. It is easy and quick to install the wall hanging fixing device. After an expansion bolt is fixed, the hanging member of the fixing device is hung on the expansion bolt without any disassembly, so as to protect the bathroom articles, and the hanging member can be fixed. This design effectively prevents loosening.
A47F 5/08 - Stands d'étalage, systèmes de suspension ou rayonnages caractérisés par leurs particularités de structure fixés aux murs, plafonds ou similairesDispositifs d'étalage en consoles murales
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
A47K 10/10 - Chevalets à serviettesPorte-serviettesBarres porte-serviettesRouleaux porte-serviettes, p. ex. rotatifs caractérisés par leur montage sur des meubles de toilette, des murs, des portes ou similaires
A47K 10/00 - Articles pour le séchage du corpsPapier hygiéniqueSupports pour ceux-ci
F16L 3/08 - Supports pour tuyaux, pour câbles ou pour conduits de protection, p. ex. potences, pattes de fixation, attaches, brides, colliers entourant pratiquement le tuyau, le câble ou le conduit de protection
F21V 21/00 - Soutien, suspension ou fixation des dispositifs d'éclairagePoignées
A47K 3/024 - Baignoires spécialement adaptées à un usage particulier, p. ex. pour le lavage des pieds, pour prendre un bain en position assise spécialement adaptées pour les enfants ou les bébés
A47H 1/102 - Moyens de montage des tringles ou rails de rideaux pour le montage des tringles
A47G 25/06 - Patères à vêtementsVestiairesChevalets à vêtements avec bras pivotants ou extensibles
A47H 1/104 - Moyens de montage des tringles ou rails de rideaux pour le montage des rails
D06F 57/12 - Supports, autres que les simples fils, pour le séchage ou l'aération du linge ou des vêtements spécialement adaptés pour fixation aux murs, plafonds, poêles ou autres supports ou objets
A wall hanging fixing device includes a decoration cover (210) which is provided with a hanging member (220) in its inner side, and the hanging member (220) is fixed on a supporting seat (260) in the inner side of the decoration cover (210) with screws (250). The hanging member (220) is provided with a hanging connection groove (222) which is fit with a supporting member, and the fixing device also is provided with a movable member (230) that can move towards or away from the hanging connection groove (222). It is easy and quick to install the wall hanging fixing device. After an expansion bolt (270) is fixed, the hanging member (220) of the fixing device is hung on the expansion bolt (270), without any disassembly, so as to protect the bathroom articles, and the hanging member (220) can be fixed, thus effectively preventing loosening.
A47G 29/087 - Dispositifs pour fixer les ustensiles ménagers, ou analogues, aux tables, murs ou similaires
A47K 10/10 - Chevalets à serviettesPorte-serviettesBarres porte-serviettesRouleaux porte-serviettes, p. ex. rotatifs caractérisés par leur montage sur des meubles de toilette, des murs, des portes ou similaires
A drainage device for kitchen and bath facilities includes a downspout body (B1) and a pipe cover (B2). The downspout body (B1) is provided with a rotatable linkage unit capable of bending and stretching in vertical direction and a guide unit for guiding vertical movement. The pipe cover (B2) is connected with the upper end of the linkage unit, a coupling member is led out from the side wall of the downspout body (B1), one end of the coupling member is connected with the linkage unit and the other end is connected with an operating mechanism (A).
A drainage device for kitchen and bath facilities includes a downspout body (B1) and a pipe cover (B2). The downspout body (B1) is provided with a rotatable link mechanism capable of bending and stretching in vertical direction and a guide mechanism for guiding vertical movement. The pipe cover (B2) is connected with the upper end of the link mechanism, a connecting mechanism is led out from the side wall of the downspout body (B1) of the drainage device, one end of the connecting mechanism is connected with the link mechanism and the other end is connected with an operating mechanism (A) of the link mechanism.
A switch device for drainage of a tank washer includes an operation switch and an opening and closing mechanism for a drainage plug mechanism (100a) of the tank washer, wherein a connecting steel wire (101) is provided between the operation switch and the opening and closing mechanism. The operation switch comprises a sliding shaft (2) and a fixed sleeve with a sliding through-hole (37) for the sliding shaft (2). The operation switch is also provided with a blocking hook(6)for the sliding shaft (2), a first and a second blocking position (71, 72) cooperating with a hook part of the blocking hook (6) are respectively provided at locations with different height on the surface of the sliding shaft (2), and the first blocking position (71) is nearer the head (21) of the sliding shaft (2) than the second blocking position (72). A first and a second oneway sliding groove are provided in the surface of the sliding shaft (2). The operation switch is provided with a spring (4) biasing from the head (21) to the tail of the sliding shaft (2). One end of the steel wire (101) is connected to the sliding shaft (2).
A switch for kitchen and bath appliances comprises a sliding shaft and a fixed base with a sliding through hole for the sliding shaft. The switch has a retaining hook for holding the sliding shaft. On the surface of the sliding shaft, there are a first and a second stop positions fitting with the hook part of the retaining hook. The first and second stop positions are at different height on the surface of the sliding shaft, with the first stop position close to the head of the sliding shaft. On the surface of the sliding shaft, there are the first and second unidirectional slide channels for the hook part of the retaining hook. The switch has a spring pushing the sliding shaft from head of the sliding shaft towards its tail. The switching on/off states are changed by a pressing operation.
F16K 1/00 - Soupapes ou clapets, c.-à-d. dispositifs obturateurs dont l'élément de fermeture possède au moins une composante du mouvement d'ouverture ou de fermeture perpendiculaire à la surface d'obturation
F16K 15/00 - Soupapes, clapets ou valves de retenue
A water diverting device comprises an inlet, two outlets, an upper and a lower sealing seats respectively for the outlets. The device further comprises a water diverting switch that fits with the sealing seats and used to switch over the outlets. The switch includes a sliding shaft and fixed base with a sliding through hole. The switch is provided with a retaining hook for holding the sliding shaft up and down direction. On the surface of the sliding shaft, there are the first and second stop positions for the hook part of the hook, first and second unidirectional slide channels. The switch has a spring pushing the shaft from its head towards its tail. The head of the shaft connects with a valve core, and positions of the sealing seats correspond with travel of the valve core. The water discharge direction is changed over by a diverting switch.
F16K 11/07 - Soupapes ou clapets à voies multiples, p. ex. clapets mélangeursRaccords de tuyauteries comportant de tels clapets ou soupapesAménagement d'obturateurs et de voies d'écoulement spécialement conçu pour mélanger les fluides dont toutes les faces d'obturation se déplacent comme un tout comportant uniquement des tiroirs à éléments de fermeture glissant linéairement à glissières cylindriques
F16K 1/02 - Soupapes ou clapets, c.-à-d. dispositifs obturateurs dont l'élément de fermeture possède au moins une composante du mouvement d'ouverture ou de fermeture perpendiculaire à la surface d'obturation à tige filetée
F16K 11/14 - Soupapes ou clapets à voies multiples, p. ex. clapets mélangeursRaccords de tuyauteries comportant de tels clapets ou soupapesAménagement d'obturateurs et de voies d'écoulement spécialement conçu pour mélanger les fluides dont plusieurs éléments de fermeture ne se déplacent pas comme un tout actionnés par un seul organe de commande, p. ex. une clé
F16K 1/00 - Soupapes ou clapets, c.-à-d. dispositifs obturateurs dont l'élément de fermeture possède au moins une composante du mouvement d'ouverture ou de fermeture perpendiculaire à la surface d'obturation
F16K 17/04 - Soupapes ou clapets de sûretéSoupapes ou clapets d'équilibrage ouvrant sur excès de pression d'un côtéSoupapes ou clapets de sûretéSoupapes ou clapets d'équilibrage fermant sur insuffisance de pression d'un côté actionnés par ressort
A diversion device includes an inlet (101), two outlets (103, 104), an upper sealing seat (102) and a lower sealing seat (105) respectively corresponding to the two outlets (103, 104), and a diversion switch that is cooperating with the sealing seats (102, 105) to switch the two outlets (103, 104). The diversion switch comprises a slide shaft (2), a fixing seat (3), a limit hook (6), a valve core (20) and a spring (4). The fixing seat (3) has a slide through-hole (31), and the slide shaft (2) can slide in the slide through-hole (31). There are a first limit position (71), a second limit position (72), a first one-way slide groove and a second one-way slide groove in the surface of the slide shaft (2), and the first limit position (71) and the second limit position (72) cooperate with a claw (60) of the limit hook (6). The first one-way slide groove, from the first limit position (71) to the second limit position (72), includes a first slide section (81) and a second slide section (82); and the second one-way slide groove, from the second limit position (72) to the first limit position (71), includes a third slide section (83) and a forth slide section (84).
F16K 11/044 - Soupapes ou clapets à voies multiples, p. ex. clapets mélangeursRaccords de tuyauteries comportant de tels clapets ou soupapesAménagement d'obturateurs et de voies d'écoulement spécialement conçu pour mélanger les fluides dont toutes les faces d'obturation se déplacent comme un tout comportant uniquement des soupapes ou des clapets à corps de soupape ou de clapet mobiles situés entre des sièges de soupape ou de clapet
F16K 1/44 - Détails du siège ou du corps de soupape pour les soupapes à double siège
F16K 1/54 - Dispositifs pour modifier la façon dont le débit varie pendant le fonctionnement de la soupape
F16K 5/12 - Dispositions pour modifier la façon dont le débit varie pendant le fonctionnement du robinet ou de la vanne
A switch of kitchen and lavatory installation comprising sliding axle (2) and securing base (3), wherein a sliding passage (31) is set in the base (3) for sliding the axle (2), and a stop hook (6) is set in the switch. A first stop (71) and a second stop (72) are set in the surface of the axle (2) for matching the movement of the hook portion (60) of the stop hook (6). A first stop (71) and a second stop (72) are positioned in different surface altitude of the axle (2) respectively, wherein the first stop (71) is near to the head (21) of the axle (2). A first one-way chute (81,82) and a second one-way chute (83,84) are set in the surface of the axle (2) for matching the movement of the hook portion (60). And a spring (4) is set in the switch to press the head (21) of the axle (2) moving to the direction of the tail of the axle (2) along the passage (31).
brevets
