A vehicle lid structure includes: a main body member that is able to block an opening formed on an exterior surface visible from the outside; and a base material which supports the main body member and is swingable about a shaft member located behind the exterior surface. The base material has an edge cover portion which covers an edge of the main body member from the rear side. When viewed from a direction along the exterior surface based on a closed state, a surface of the edge cover portion is inclined to approach the opening as it goes from a center of the opening toward an edge of the opening.
A lid structure for a vehicle includes a shaft member located on a rear side of an exterior surface that is visible from an outside; a lid that is swingable about the shaft member to open and close an opening formed on the exterior surface; and a support member that rotatably supports the shaft member. The support member includes a fixing portion fixed to the rear side of the exterior surface. When viewed in a direction along the shaft member, the fixing portion is located on a side opposite to the opening with the shaft member as a center.
An energy absorber includes a connecting portion provided between a protrusion and a fixing portion, and a part or all of the connecting portion is an inclined portion. When an external force is applied in a direction inclined with respect to an axis of the protrusion, the inclined portion is deformed, and the protrusion changes in direction so that its axis is aligned with the external force, and the energy absorber is crushed to absorb energy.
A hinge member (30) comprises a fixed part (40) that is fixed to a storage part (20) for storing baggage, and a swinging part (50) that is attached to the fixed part (40) so as to be capable of swinging and can support a lid body (60) for opening and closing the opening of the storage part (20). The fixed part (40) has a fixed surface part (41) that is fixed to the storage part (20), and side plate parts (42) that each extend from the fixed surface part (41) along the outer peripheral surface (22) of the storage part (20) and hold the outer peripheral surface (22) from either side.
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
A storage device (10) comprises: a storage part (20) in which baggage can be stored; a hinge member (61) attached to the storage part (20); and a lid body (60) for opening and closing an opening of the storage part (20). The hinge member (61) has a lid body support part (52) that extends radially from an axial line (CL) serving as the center of swinging, and that abuts the lid body (60). The lid body (60) extends in the radial direction of the axial line (CL) from a hinge connection part (61) connected to the lid body support part (52). Either the lid body support part (52) or the hinge connection part (61) has, in one end thereof, a recess (61a) which is formed in a concave shape along the radial direction of the axial line (CL). On the other end, a protrusion (52a) that protrudes toward the recess (61a) is formed, and the protrusion (52a) is inserted into the recess (61a).
B65D 43/16 - Couvercles ou chapeaux inamovibles s'ouvrant à charnières vers le haut ou vers le bas
B60N 3/00 - Aménagements ou adaptations d'autres accessoires pour passagers, non prévus ailleurs
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
A memory cell circuit, a memory cell array structure and a manufacturing method thereof are provided. The memory cell circuit includes a first transistor, a second transistor and a capacitor. The first transistor has a first end electrically coupled to a bit line, and a gate of the first transistor is electrically coupled to a primary word line. The second transistor has a first end electrically coupled to a second end of the first transistor, and a gate of the second transistor is electrically coupled to an auxiliary word line. A first end of the capacitor is electrically coupled to a second end of the second transistor and a second end of the capacitor receives a reference voltage.
A console for vehicle includes a console main body, a placing portion provided at a top of the console main body to allow belongings to be placed thereon, an armrest supported from a retracted position which is a side of the console main body to a rest position above the retracted position in a swingable manner to allow an occupant to place an arm thereon when the armrest is located at the rest position, and a falling-of-belongings suppression mechanism interlocked with swing of the armrest and configured to suppress falling of the belongings placed on the placing portion when the armrest is located at the rest position.
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
B60N 3/10 - Aménagements ou adaptations d'autres accessoires pour passagers, non prévus ailleurs de réceptacles pour nourriture ou boissons, p. ex. réfrigérés
A vehicle storage device has a locking device that can keep a lid in a closed condition. The locking device includes an operation member for performing an unlocking operation of the lid, an engagement member that can be engaged with the storage portion and its engaged state is released when the operation member is operated, a first spring that biases the operation member toward a standby position in a locked state, and a second spring that biases the engagement member toward an engagement position in which the engagement member is engaged with the storage portion. The engagement member has a hook-shaped hook portion that can engage with the storage portion, and the second spring is disposed to face a rear face of the engagement member such that the second spring biases the hook portion toward the storage portion from the rear face of the engagement member.
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
E05B 83/32 - Serrures pour boîtes à gants, pour consoles de rangement, pour bouchons de réservoir à essence ou similaire pour consoles de rangement, p. ex. entre les sièges passagers
E05C 3/16 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche
E05C 3/30 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche le pêne étant commandé par un ressort ayant la forme d'un crochet
9.
FOIL STAMPING DIE AND METHOD OF MANUFACTURING VEHICLE INTERIOR COMPONENT
The present invention relates to a foil stamping die used for foil stamping, and a method of manufacturing a vehicle interior component using the foil stamping die. An object of the present invention is to provide a foil stamping technique capable of enhancing the design property of a printing object. In a foil stamping die capable of transferring a foil to the printing object while applying an uneven pattern to a surface of the printing object by pressing the die toward the printing object on which the foil is placed, a pattern-shape portion which is a portion corresponding to the uneven pattern is provided, and an edge of the pattern-shape portion has the same thickness over the entire area thereof.
B21D 22/02 - Estampage utilisant des dispositifs ou outils rigides
B21D 53/88 - Fabrication d'autres objets particuliers d'autres parties de véhicules, p. ex. capots, garde-boue
B41F 19/06 - Impression et travail en relief entre une forme négative et une forme positive, après encrage et essuyage de la forme négativeImpression à partir d'une bande encrée, en couleurs ou en "or"
A resin-molded article includes a main body including a first face member including a locked portion, and a second face member raised from the first face member. A protrusion locked to the locked portion and protruding from the first face member. A pawl of the protrusion includes a first wall and a second wall disposed in a substantially V shape, and is bendable. A distal end face of the second wall is in contact with an upper face of the locked portion. The pawl is configured such that one end which is an end closer to a swing axis is bent with a weaker load than an other end which is an end farther from the swing axis.
A storage device includes a support shaft for supporting the lid to the container such that the lid can open and close relative to the container, a torsion spring for biasing the lid in a direction to open the lid, and a cylindrical cover that surrounds an outer peripheral surface of a coil of the torsion spring. The torsion spring includes a first arm and a second arm. The second arm can be engaged with the container when the container, the lid and the support shaft are in the assembled state and the first arm is engaged with the lid. The cover has clearance (cutout) that allows the second arm to pass without interference.
A lock mechanism includes a lock member that can take a locked position in which the lock member contacts a lid to lock the lid, and an unlocked position in which the lock member is spaced apart from the lid to release the locking, a button that pushes the lock member to cause the lock member to swing to the unlocked position, and a support member that supports both the lock member and the button. The support member has a stopper for locking the lock member in the locked position. The stopper is integrated with the support member. The button is spaced apart from the lock member when the lock member is in the locked position.
B60R 7/02 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes dans un compartiment à bagages séparé
E05B 85/08 - Tirettes d’actionnement, de frise ou boutons de verrouillage de porte intérieure
An overhead console includes a storage box that can be stored in a panel. The storage box includes a bottom having an outer surface formed along a connection surface, a wall having an outer surface formed along a lower surface, and a shaft protruding in a vehicle width direction. A recess of the panel includes a first slide groove which extends in a vehicle front-rear direction and in which the shaft is slidable. When the storage box is in a stored position, the shaft is located at a front end of the first slide groove. When the storage box is in a use position, the shaft is located at a rear end of the first slide groove.
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
A resin-molded article is configured so that a body having a design surface and a clip attachment member which is formed on a back surface of the design surface of the body and to which a clip is attachable, the body and the clip attachment member being integrally formed. The clip attachment member includes an attachment wall raised from the back surface, and a rib extending from the attachment wall to the back surface and reinforcing the attachment wall. A through-hole penetrating through the attachment wall is formed at a position adjacent to the rib of the attachment wall.
The air-conditioning outlet device includes the housing having a frame shape and having a flow path through which air flows. The housing has an overlapping surface that a fin is overlappable in a state where the flow path is closed, and a clearance recess recessed from the overlapping surface so as not to come into contact with the fin when the fin rotates from the state where the flow path is closed. The clearance recess of the housing and the fin define a blow-in space into which the air is blown from a gap between the housing and the fin. One of the fin and the housing includes a barrier wall that interferes with the air flowing through the blow-in space.
A storage body of a storage structure for vehicle includes a box that is open on one surface, and an opening and closing member by which the open surface of the box is openable and closable. The box has an extraction hole through which an object stored in the box is extractable. The extraction hole is located in a surface different from the open surface of the box. The storage body is swingably attached to a recess of an instrument panel. When the storage body is in a storage position, the opening and closing member faces a passenger compartment. When the storage body is in a swing position, the opening and closing member and the extraction hole face the passenger compartment.
B60R 7/06 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager montés sur ou logés sous le tableau de bord
A first cover body of a cover device for vehicle includes a transparent member and a support member integrally formed on a back surface of the transparent member. The support member includes a first extension portion extending from an edge of the support member to a side opposite the transparent member. The transparent member includes a second extension portion and a decoration layer. The second extension portion is integrally formed with the first extension portion. The decoration layer overlaps an entirety of the second extension portion when viewed from a front surface of the transparent member, and is opaque over an entire surface.
B60R 19/02 - Pare-chocs, c.-à-d. éléments pour recevoir ou absorber les chocs pour protéger les véhicules ou dévier les chocs provenant d'autres véhicules ou objets
B60R 19/52 - Protections du radiateur ou de la calandre
B60R 13/04 - Bandes ornementales ou de protectionDispositifs pour inscriptions ornementales
A resin-molded article is fixed to and used on a plate-shaped member formed in a plate shape. The resin-molded article is such that an upper surface contact portion that is contactable with an upper surface of the plate-shaped member, an end surface contact portion that is contactable with an end surface of the plate-shaped member, and a lower surface contact portion that is formed separately from the end surface contact portion and that is contactable with a lower surface of the plate-shaped member are formed integrally with a body portion. It is preferable that an end portion contact surface of the end surface contact portion is disposed in substantially the same direction as the end surface of the plate-shaped member, the end portion contact surface being contactable with the end surface of the plate-shaped member.
A locking device for an opening-closing body includes: a housing; a rotor that is rotatably supported by the housing; and at least one rod that is provided to move in and out from the housing when the rotor rotates, and that engages with and disengages from a locking portion. The housing includes an accommodating portion that slidably accommodates at least the one rod, the rotor includes a protrusion portion protruding in a rotation axis direction, and the rod includes a fitting recessed portion into which the protrusion portion is fittable. The protrusion portion is configured to be rotatable to a position where the protrusion portion escapes from a slide path of the rod with respect to the accommodating portion.
E05C 9/04 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées en directions opposées lors de l'immobilisation ou de la libération
E05B 83/30 - Serrures pour boîtes à gants, pour consoles de rangement, pour bouchons de réservoir à essence ou similaire pour boîtes à gants
E05C 9/00 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant
An interior structure for vehicle includes a first member and a second member that can be superimposed on the first member and that is elastically deformable. A second superimposed surface of the second member includes a plurality of recesses that are open toward a first superimposed surface of the first member, and that are independent of each other without communicating with each other. The plurality of recesses include a plurality of large recesses having a large volume, and a plurality of small recesses having a smaller volume than the volume of the plurality of large recesses. Portions in which the plurality of large recesses are located form a low-elasticity portion of the second member. Portions in which the plurality of small recesses are located form a high-elasticity portion of the second member.
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
02 - Couleurs, vernis, laques
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
29 - Viande, produits laitiers et aliments préparés ou conservés
35 - Publicité; Affaires commerciales
37 - Services de construction; extraction minière; installation et réparation
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Chemicals; industrial chemicals; phenol for industrial
purposes; phenols; flavonoids [phenolic compounds] for
industrial purposes; creosote for chemical purposes;
chemicals for the manufacture of pigments; titanium oxides;
carbon black for industrial purposes; iron oxides;
surface-active chemical agents; tensio-active agents;
getters [chemically active substances]; bromine for chemical
purposes; catalysts; cellulose derivatives [chemicals];
fatty acids; glycerine for industrial purposes; defoaming
agents; lime carbonate; chemical preparations for use in the
manufacture of paints; refined methanol for industrial
purposes; acids; chemicals for use in the manufacture of
polyurethanes; silicon dioxide; silicon; methacrylic acid;
styrene; rubber preservatives; chemical intensifiers for
rubber; catalysts for use in the manufacture of rubber;
desiccants; alumina; organic acids and their salts; gum
solvents; solvents for varnishes; citric acid for industrial
purposes; chemical preparations for use in industry;
anti-static preparations for industrial purposes;
antioxidants for use in manufacture; fire retardant
compositions for commercial and domestic use; chemical
products for use in the manufacture of fragrances; esters;
finishing preparations for use in the manufacture of steel;
welding chemicals; brazing chemicals; fluorspar compounds;
plant growth regulating preparations; agricultural
chemicals, except fungicides, herbicides, insecticides and
parasiticides; glue and adhesives for industrial purposes;
higher fatty acids; non-metallic minerals for use in
manufacture; plastics, unprocessed; synthetic resins,
unprocessed; artificial resins, unprocessed; phenolic
resins, unprocessed; epoxy resins, unprocessed; polyethylene
resins, unprocessed; polypropylene resins, unprocessed;
thermoplastic resins, unprocessed; polystyrene resins,
unprocessed; polyamide resins, unprocessed; polymer resins,
unprocessed; unprocessed polymethyl methacrylate resins;
acrylic resins, unprocessed; unprocessed polycarbonate
resins; unprocessed polybutylene terephthalate resins;
unprocessed acrylonitrile butadiene styrene resins;
unprocessed polyphenylene oxide resins; unprocessed
artificial resins as raw materials in the form of powders,
liquids or pastes; unprocessed polyphenylene sulfide resins;
cellulose pulp; paper pulp; wood pulp; flour for industrial
purposes; starch for industrial purposes; fertilizers;
chemical compositions for developing photographs;
photoresists; artificial sweeteners [chemical preparations];
drying agents for putties. Printing ink; inks for colouring textiles; dry inks; oil
colors; watercolor paints for use in art; pigments;
dyestuffs; paints; coatings [paints]; drying agents for
paints; siccatives for use as drying agents for coatings;
turpentine for use as paint thinner; synthetic resin paints;
clear protective coatings for vehicles; thickeners for
paints; agglutinants for paints; protective preparations for
metals; anti-rust greases; nonferrous metals in foil or
powder form for use in painting, decorating, printing and
art; precious metals in foil or powder form for use in
painting, decorating, printing and art. Automobiles and their parts and fittings; two-wheeled motor
vehicles, bicycles and their parts and fittings; radiator
grills, not of metal, for automobile and motorcycles;
radiator grills of metal for automobile and motorcycles;
hoods for vehicle engines; bumpers for automobiles; spoilers
for automobiles; petrol tank caps for motor cars; air pumps
[vehicle accessories]; automobile dashboards; automotive
interior trim; axles for vehicles; axle journals; gear boxes
for land vehicles; transmissions for land vehicles; shock
absorbers for automobiles; vessels and their parts and
fittings. Electrical insulating materials; electrical insulating
tapes; industrial packaging containers of rubber; chemical
fiber, not for textile use; rock wool; slag wool for
insulating electricity or sound; carbon fibres, other than
for textile use; rubber thread and covered rubber yarn, not
for textile use; chemical fiber yarn and thread, not for
textile use; plastic sheeting for agricultural purposes;
adhesive tapes, other than stationery and not for medical or
household purposes; plastic substances, semi-processed;
polypropylene film, other than for wrapping; synthetic
resins, semi-processed; artificial resins, semi-processed;
rubber, raw or semi-worked; gum, raw or semi-worked;
synthetic rubber; soundproofing materials of rock wool, not
for building purposes; floating anti-pollution barriers;
plastic film, other than for wrapping; padding materials of
rubber or plastics; stuffing of rubber or plastics; packing
[cushioning, stuffing] materials of rubber or plastics;
shock-absorbing buffers of rubber. Meat; edible oils and fats; rice bran oil for food; milk
products; protein milk; eggs; seafood, not live; frozen
vegetables; frozen fruits; processed meat products;
processed seafood products; processed vegetables and fruits;
fried tofu pieces [abura-age]; freeze-dried tofu pieces
[kohri-dofu]; jelly made from devils' tongue root
[konnyaku]; soya milk; tofu; fermented soybeans [natto];
processed eggs; pre-cooked curry stew, stew and soup mixes;
dried flakes of laver for sprinkling on rice in hot water
[ochazuke-nori]; furi-kake [dried flakes of fish, meat,
vegetables or seaweed]; side-dish made of fermented soybean
[name-mono]; preserved pulses; formed textured vegetable
protein for use as a meat substitute; unformed textured
vegetable protein for use as a meat extender; textured
vegetable protein for use as a meat extender. Advertising and publicity services; promoting the goods and
services of others through the administration of sales and
promotional incentive schemes involving trading stamps;
business management analysis; business consultancy; business
management; marketing research and analysis; providing
information concerning commercial sales; presentation of
goods on communication media, for retail purposes; sales
promotion for others; business management assistance;
marketing; providing business information; product sales
information; import-export agency services; procurement
services for others [purchasing goods and services for other
businesses]; retail services or wholesale services for meat;
retail services or wholesale services for processed food;
retail services or wholesale services for personal articles;
retail services or wholesale services for foods and
beverages; retail services or wholesale services for sea
food; retail services or wholesale services for vegetables
and fruits; retail services or wholesale services for rice
and cereals; retail services or wholesale services for
carbonated drinks [refreshing beverages] and non-alcoholic
fruit juice beverages; retail services or wholesale services
for automobiles; retail services or wholesale services for
two-wheeled motor vehicles; retail services or wholesale
services for bicycles; retail services or wholesale services
for furniture; retail services or wholesale services for
joinery fittings; retail services or wholesale services for
electrical machinery and apparatuses; retail services or
wholesale services for bladed or pointed hand tools, hand
tools and metal hardware; retail services or wholesale
services for kitchen equipment, cleaning tools and washing
utensils; retail services or wholesale services for
pharmaceutical, veterinary and sanitary preparations and
medical supplies; retail services or wholesale services for
cosmetics, toiletries, dentifrices, soaps and detergents;
retail services or wholesale services for agricultural
machines, implements and supplies; retail services or
wholesale services for fuel; retail services or wholesale
services for paper and stationery; retail services or
wholesale services for sports goods; retail services or
wholesale services for toys, dolls, game machines and
apparatus; retail services or wholesale services for
building materials. Repair or maintenance of automobiles; repair or maintenance
of two-wheeled motor vehicles; repair or maintenance of
metalworking machines and tools; repair or maintenance of
plastic processing machines and apparatus. Metal treating; metal casting; processing of rubber;
processing of plastics; ceramic processing; woodworking;
food and drink preservation; freezing of foods; pasteurising
of food and beverages; fruit crushing.
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
02 - Couleurs, vernis, laques
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
29 - Viande, produits laitiers et aliments préparés ou conservés
35 - Publicité; Affaires commerciales
37 - Services de construction; extraction minière; installation et réparation
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Chemicals; industrial chemicals; phenol for industrial
purposes; phenols; flavonoids [phenolic compounds] for
industrial purposes; creosote for chemical purposes;
chemicals for the manufacture of pigments; titanium oxides;
carbon black for industrial purposes; iron oxides;
surface-active chemical agents; tensio-active agents;
getters [chemically active substances]; bromine for chemical
purposes; catalysts; cellulose derivatives [chemicals];
fatty acids; glycerine for industrial purposes; defoaming
agents; lime carbonate; chemical preparations for use in the
manufacture of paints; refined methanol for industrial
purposes; acids; chemicals for use in the manufacture of
polyurethanes; silicon dioxide; silicon; methacrylic acid;
styrene; rubber preservatives; chemical intensifiers for
rubber; catalysts for use in the manufacture of rubber;
desiccants; alumina; organic acids and their salts; gum
solvents; solvents for varnishes; citric acid for industrial
purposes; chemical preparations for use in industry;
anti-static preparations for industrial purposes;
antioxidants for use in manufacture; fire retardant
compositions for commercial and domestic use; chemical
products for use in the manufacture of fragrances; esters;
finishing preparations for use in the manufacture of steel;
welding chemicals; brazing chemicals; fluorspar compounds;
plant growth regulating preparations; agricultural
chemicals, except fungicides, herbicides, insecticides and
parasiticides; glue and adhesives for industrial purposes;
higher fatty acids; non-metallic minerals for use in
manufacture; plastics, unprocessed; synthetic resins,
unprocessed; artificial resins, unprocessed; phenolic
resins, unprocessed; epoxy resins, unprocessed; polyethylene
resins, unprocessed; polypropylene resins, unprocessed;
thermoplastic resins, unprocessed; polystyrene resins,
unprocessed; polyamide resins, unprocessed; polymer resins,
unprocessed; unprocessed polymethyl methacrylate resins;
acrylic resins, unprocessed; unprocessed polycarbonate
resins; unprocessed polybutylene terephthalate resins;
unprocessed acrylonitrile butadiene styrene resins;
unprocessed polyphenylene oxide resins; unprocessed
artificial resins as raw materials in the form of powders,
liquids or pastes; unprocessed polyphenylene sulfide resins;
cellulose pulp; paper pulp; wood pulp; flour for industrial
purposes; starch for industrial purposes; fertilizers;
chemical compositions for developing photographs;
photoresists; artificial sweeteners [chemical preparations];
drying agents for putties. Printing ink; inks for colouring textiles; dry inks; oil
colors; watercolor paints for use in art; pigments;
dyestuffs; paints; coatings [paints]; drying agents for
paints; siccatives for use as drying agents for coatings;
turpentine for use as paint thinner; synthetic resin paints;
clear protective coatings for vehicles; thickeners for
paints; agglutinants for paints; protective preparations for
metals; anti-rust greases; nonferrous metals in foil or
powder form for use in painting, decorating, printing and
art; precious metals in foil or powder form for use in
painting, decorating, printing and art. Automobiles and their parts and fittings; two-wheeled motor
vehicles, bicycles and their parts and fittings; radiator
grills, not of metal, for automobile and motorcycles;
radiator grills of metal for automobile and motorcycles;
hoods for vehicle engines; bumpers for automobiles; spoilers
for automobiles; petrol tank caps for motor cars; air pumps
[vehicle accessories]; automobile dashboards; automotive
interior trim; axles for vehicles; axle journals; gear boxes
for land vehicles; transmissions for land vehicles; shock
absorbers for automobiles; vessels and their parts and
fittings. Electrical insulating materials; electrical insulating
tapes; industrial packaging containers of rubber; chemical
fiber, not for textile use; rock wool; slag wool for
insulating electricity or sound; carbon fibres, other than
for textile use; rubber thread and covered rubber yarn, not
for textile use; chemical fiber yarn and thread, not for
textile use; plastic sheeting for agricultural purposes;
adhesive tapes, other than stationery and not for medical or
household purposes; plastic substances, semi-processed;
polypropylene film, other than for wrapping; synthetic
resins, semi-processed; artificial resins, semi-processed;
rubber, raw or semi-worked; gum, raw or semi-worked;
synthetic rubber; soundproofing materials of rock wool, not
for building purposes; floating anti-pollution barriers;
plastic film, other than for wrapping; padding materials of
rubber or plastics; stuffing of rubber or plastics; packing
[cushioning, stuffing] materials of rubber or plastics;
shock-absorbing buffers of rubber. Meat; edible oils and fats; rice bran oil for food; milk
products; protein milk; eggs; seafood, not live; frozen
vegetables; frozen fruits; processed meat products;
processed seafood products; processed vegetables and fruits;
fried tofu pieces [abura-age]; freeze-dried tofu pieces
[kohri-dofu]; jelly made from devils' tongue root
[konnyaku]; soya milk; tofu; fermented soybeans [natto];
processed eggs; pre-cooked curry stew, stew and soup mixes;
dried flakes of laver for sprinkling on rice in hot water
[ochazuke-nori]; furi-kake [dried flakes of fish, meat,
vegetables or seaweed]; side-dish made of fermented soybean
[name-mono]; preserved pulses; formed textured vegetable
protein for use as a meat substitute; unformed textured
vegetable protein for use as a meat extender; textured
vegetable protein for use as a meat extender. Advertising and publicity services; promoting the goods and
services of others through the administration of sales and
promotional incentive schemes involving trading stamps;
business management analysis; business consultancy; business
management; marketing research and analysis; providing
information concerning commercial sales; presentation of
goods on communication media, for retail purposes; sales
promotion for others; business management assistance;
marketing; providing business information; product sales
information; import-export agency services; procurement
services for others [purchasing goods and services for other
businesses]; retail services or wholesale services for meat;
retail services or wholesale services for processed food;
retail services or wholesale services for personal articles;
retail services or wholesale services for foods and
beverages; retail services or wholesale services for sea
food; retail services or wholesale services for vegetables
and fruits; retail services or wholesale services for rice
and cereals; retail services or wholesale services for
carbonated drinks [refreshing beverages] and non-alcoholic
fruit juice beverages; retail services or wholesale services
for automobiles; retail services or wholesale services for
two-wheeled motor vehicles; retail services or wholesale
services for bicycles; retail services or wholesale services
for furniture; retail services or wholesale services for
joinery fittings; retail services or wholesale services for
electrical machinery and apparatuses; retail services or
wholesale services for bladed or pointed hand tools, hand
tools and metal hardware; retail services or wholesale
services for kitchen equipment, cleaning tools and washing
utensils; retail services or wholesale services for
pharmaceutical, veterinary and sanitary preparations and
medical supplies; retail services or wholesale services for
cosmetics, toiletries, dentifrices, soaps and detergents;
retail services or wholesale services for agricultural
machines, implements and supplies; retail services or
wholesale services for fuel; retail services or wholesale
services for paper and stationery; retail services or
wholesale services for sports goods; retail services or
wholesale services for toys, dolls, game machines and
apparatus; retail services or wholesale services for
building materials. Repair or maintenance of automobiles; repair or maintenance
of two-wheeled motor vehicles; repair or maintenance of
metalworking machines and tools; repair or maintenance of
plastic processing machines and apparatus. Metal treating; metal casting; processing of rubber;
processing of plastics; ceramic processing; woodworking;
food and drink preservation; freezing of foods; pasteurising
of food and beverages; fruit crushing.
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Automobiles and their parts and fittings; two-wheeled motor vehicles, bicycles and their parts and fittings; radiator grills, not of metal, for automobile and motorcycles; radiator grills of metal for automobile and motorcycles; hoods for vehicle engines; bumpers for automobiles; spoilers for automobiles; petrol tank caps for motor cars; air pumps [vehicle accessories]; automobile dashboards; automotive interior trim; axles for vehicles; axle journals; gear boxes for land vehicles; transmissions for land vehicles; shock absorbers for automobiles; vessels and their parts and fittings.
(2) Electrical insulating materials; electrical insulating tapes; industrial packaging containers of rubber; chemical fiber, not for textile use; slag wool for insulating electricity or sound; carbon fibres, other than for textile use; rubber thread and covered rubber yarn, not for textile use; chemical fiber yarn and thread, not for textile use; plastic sheeting for agricultural purposes; adhesive tapes, other than stationery and not for medical or household purposes; plastic substances, semi-processed; polypropylene film, other than for wrapping; synthetic resins, semi-processed; artificial resins, semi-processed; rubber, raw or semi-worked; gum, raw or semi-worked; synthetic rubber; floating anti-pollution barriers; plastic film, other than for wrapping; padding materials of rubber or plastics; stuffing of rubber or plastics; packing [cushioning, stuffing] materials of rubber or plastics; shock-absorbing buffers of rubber. (1) Metal treating; metal casting; processing of rubber; processing of plastics; ceramic processing; woodworking; food and drink preservation; freezing of foods; pasteurising of food and beverages; fruit crushing.
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
35 - Publicité; Affaires commerciales
Produits et services
Metal treating; metal casting; processing of rubber; processing of plastics; custom processing of synthetic resin and metal; custom molding of synthetic resin and metal Negotiation and conclusion of commercial transactions for third parties; procurement services for others, namely, purchasing resins for automobiles, materials for automobiles, paints and raw materials of paints for automobiles, raw materials for semiconductor processing materials, chemical raw materials, automobile parts, and resin molding products for roof of automobiles
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Automobiles and their parts and fittings; two-wheeled motor vehicles, bicycles and their parts and fittings; radiator grills, not of metal, for automobile and motorcycles; radiator grills of metal for automobile and motorcycles; hoods for vehicle engines; bumpers for automobiles; spoilers for automobiles; petrol tank caps for motor cars; air pumps [vehicle accessories]; automobile dashboards; automotive interior trim; axles for vehicles; axle journals; gear boxes for land vehicles; transmissions for land vehicles; shock absorbers for automobiles; vessels and their parts and fittings.
(2) Electrical insulating materials; electrical insulating tapes; industrial packaging containers of rubber; chemical fiber, not for textile use; slag wool for insulating electricity or sound; carbon fibres, other than for textile use; rubber thread and covered rubber yarn, not for textile use; chemical fiber yarn and thread, not for textile use; plastic sheeting for agricultural purposes; adhesive tapes, other than stationery and not for medical or household purposes; plastic substances, semi-processed; polypropylene film, other than for wrapping; synthetic resins, semi-processed; artificial resins, semi-processed; rubber, raw or semi-worked; gum, raw or semi-worked; synthetic rubber; floating anti-pollution barriers; plastic film, other than for wrapping; padding materials of rubber or plastics; stuffing of rubber or plastics; packing [cushioning, stuffing] materials of rubber or plastics; shock-absorbing buffers of rubber. (1) Metal treating; metal casting; processing of rubber; processing of plastics; ceramic processing; woodworking; food and drink preservation; freezing of foods; pasteurising of food and beverages; fruit crushing.
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
35 - Publicité; Affaires commerciales
Produits et services
Metal treating; metal casting; processing of rubber; processing of plastics; custom processing of synthetic resin and metal; custom molding of synthetic resin and metal Negotiation and conclusion of commercial transactions for third parties; procurement services for others, namely, purchasing resins for automobiles, materials for automobiles, paints and raw materials of paints for automobiles, raw materials for semiconductor processing materials, chemical raw materials, automobile parts, and resin molding products for roof of automobiles
27.
Storage device for vehicle and method of assembling storage device
A vehicle storage device includes a storage portion that has an opening in its one face and is configured to store at least one thing therein, a bracket body fixed to an attaching surface portion, which is another face of the storage portion, a shaft member supported on the bracket body, a lid supported on the shaft member such that the lid can swing to open and close at least part of the opening of the storage portion, and a coil spring configured to bias the lid in an opening direction. The bracket body includes at least one engaging portion that extends along the attaching surface portion. The attaching surface portion includes at least one engaged portion that has an opening to receive the respective engaging portion.
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p. ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
B60R 11/00 - Autres aménagements pour tenir ou monter des objets
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
02 - Couleurs, vernis, laques
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
29 - Viande, produits laitiers et aliments préparés ou conservés
35 - Publicité; Affaires commerciales
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Chemicals; industrial chemicals; phenol for industrial
purposes; phenols; flavonoids [phenolic compounds] for
industrial purposes; creosote for chemical purposes;
chemicals for the manufacture of pigments; titanium oxides;
carbon black for industrial purposes; iron oxides;
surface-active chemical agents; tensio-active agents;
getters [chemically active substances]; bromine for chemical
purposes; catalysts; cellulose derivatives [chemicals];
fatty acids; glycerine for industrial purposes; defoaming
agents; lime carbonate; chemical preparations for use in the
manufacture of paints; refined methanol for industrial
purposes; acids; chemicals for use in the manufacture of
polyurethanes; silicon dioxide; silicon; methacrylic acid;
styrene; rubber preservatives; chemical intensifiers for
rubber; catalysts for use in the manufacture of rubber;
desiccants; alumina; organic acids and their salts; gum
solvents; solvents for varnishes; citric acid for industrial
purposes; chemical preparations for use in industry;
anti-static preparations for industrial purposes;
antioxidants for use in manufacture; fire retardant
compositions for commercial and domestic use; chemical
products for use in the manufacture of fragrances; esters;
finishing preparations for use in the manufacture of steel;
welding chemicals; brazing chemicals; fluorspar compounds;
plant growth regulating preparations; agricultural
chemicals, except fungicides, herbicides, insecticides and
parasiticides; glue and adhesives for industrial purposes;
higher fatty acids; non-metallic minerals for use in
manufacture; plastics, unprocessed; synthetic resins,
unprocessed; artificial resins, unprocessed; phenolic
resins, unprocessed; epoxy resins, unprocessed; polyethylene
resins, unprocessed; polypropylene resins, unprocessed;
thermoplastic resins, unprocessed; polystyrene resins,
unprocessed; polyamide resins, unprocessed; polymer resins,
unprocessed; unprocessed polymethyl methacrylate resins;
acrylic resins, unprocessed; unprocessed polycarbonate
resins; unprocessed polybutylene terephthalate resins;
unprocessed acrylonitrile butadiene styrene resins;
unprocessed polyphenylene oxide resins; unprocessed
artificial resins as raw materials in the form of powders,
liquids or pastes; unprocessed polyphenylene sulfide resins;
cellulose pulp; paper pulp; wood pulp; flour for industrial
purposes; starch for industrial purposes; fertilizers;
chemical compositions for developing photographs;
photoresists; artificial sweeteners [chemical preparations];
drying agents for putties. Printing ink; inks for colouring textiles; dry inks; oil
colors; watercolor paints for use in art; pigments;
dyestuffs; paints; coatings [paints]; drying agents for
paints; siccatives for use as drying agents for coatings;
turpentine for use as paint thinner; synthetic resin paints;
clear protective coatings for vehicles; thickeners for
paints; agglutinants for paints; protective preparations for
metals; anti-rust greases; nonferrous metals in foil or
powder form for use in painting, decorating, printing and
art; precious metals in foil or powder form for use in
painting, decorating, printing and art. Automobiles and their parts and fittings; two-wheeled motor
vehicles, bicycles and their parts and fittings; radiator
grills, not of metal, for automobile and motorcycles;
radiator grills of metal for automobile and motorcycles;
hoods for vehicle engines; bumpers for automobiles; spoilers
for automobiles; petrol tank caps for motor cars; air pumps
[vehicle accessories]; automobile dashboards; automotive
interior trim; axles for vehicles; axle journals; gear boxes
for land vehicles; transmissions for land vehicles; shock
absorbers for automobiles; vessels and their parts and
fittings. Electrical insulating materials; electrical insulating
tapes; industrial packaging containers of rubber; chemical
fiber, not for textile use; rock wool; slag wool for
insulating electricity or sound; carbon fibres, other than
for textile use; rubber thread and covered rubber yarn, not
for textile use; chemical fiber yarn and thread, not for
textile use; plastic sheeting for agricultural purposes;
adhesive tapes, other than stationery and not for medical or
household purposes; plastic substances, semi-processed;
polypropylene film, other than for wrapping; synthetic
resins, semi-processed; artificial resins, semi-processed;
rubber, raw or semi-worked; gum, raw or semi-worked;
synthetic rubber; soundproofing materials of rock wool, not
for building purposes; floating anti-pollution barriers;
plastic film, other than for wrapping; padding materials of
rubber or plastics; stuffing of rubber or plastics; packing
[cushioning, stuffing] materials of rubber or plastics;
shock-absorbing buffers of rubber. Meat; edible oils and fats; rice bran oil for food; milk
products; protein milk; eggs; seafood, not live; frozen
vegetables; frozen fruits; processed meat products;
processed seafood products; processed vegetables and fruits;
fried tofu pieces [Abura-age]; freeze-dried tofu pieces
[Kohri-dofu]; jelly made from devils' tongue root
[Konnyaku]; soya milk; tofu; fermented soybeans [Natto];
processed eggs; pre-cooked curry stew, stew and soup mixes;
dried flakes of laver for sprinkling on rice in hot water
[Ochazuke-nori]; furi-kake [dried flakes of fish, meat,
vegetables or seaweed]; side-dish made of fermented soybean
[Name-mono]; preserved pulses; formed textured vegetable
protein for use as a meat substitute; unformed textured
vegetable protein for use as a meat extender; textured
vegetable protein for use as a meat extender. Advertising and publicity services; promoting the goods and
services of others through the administration of sales and
promotional incentive schemes involving trading stamps;
business management analysis; business consultancy; business
management; marketing research and analysis; providing
information concerning commercial sales; presentation of
goods on communication media, for retail purposes; sales
promotion for others; business management assistance;
marketing; providing business information; product sales
information; import-export agency services; procurement
services for others [purchasing goods and services for other
businesses]; retail services or wholesale services for meat;
retail services or wholesale services for processed food;
retail services or wholesale services for personal articles;
retail services or wholesale services for foods and
beverages; retail services or wholesale services for sea
food; retail services or wholesale services for vegetables
and fruits; retail services or wholesale services for rice
and cereals; retail services or wholesale services for
carbonated drinks [refreshing beverages] and non-alcoholic
fruit juice beverages; retail services or wholesale services
for automobiles; retail services or wholesale services for
two-wheeled motor vehicles; retail services or wholesale
services for bicycles; retail services or wholesale services
for furniture; retail services or wholesale services for
joinery fittings; retail services or wholesale services for
electrical machinery and apparatuses; retail services or
wholesale services for bladed or pointed hand tools, hand
tools and metal hardware; retail services or wholesale
services for kitchen equipment, cleaning tools and washing
utensils; retail services or wholesale services for
pharmaceutical, veterinary and sanitary preparations and
medical supplies; retail services or wholesale services for
cosmetics, toiletries, dentifrices, soaps and detergents;
retail services or wholesale services for agricultural
machines, implements and supplies; retail services or
wholesale services for fuel; retail services or wholesale
services for paper and stationery; retail services or
wholesale services for sports goods; retail services or
wholesale services for toys, dolls, game machines and
apparatus; retail services or wholesale services for
building materials. Metal treating; metal casting; processing of rubber;
processing of plastics; ceramic processing; woodworking;
food and drink preservation; freezing of foods; pasteurising
of food and beverages; fruit crushing.
12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Automobiles and their parts and fittings; two-wheeled motor vehicles, namely, electric two-wheel balance scooters, electric two-wheel mopeds for road use, electric two-wheel stand up scooters for road use, two-wheel stand-up scooters for recreational use, two-wheeled cargo trailers, two-wheeled carts, two-wheeled passenger carts, two-wheeled trolleys; bicycles and their parts and fittings; radiator grills, not of metal, for automobile and motorcycles; radiator grills of metal for automobile and motorcycles; hoods for vehicle engines; bumpers for automobiles; spoilers for automobiles; petrol tank caps for motor cars; air pumps for automobiles, two-wheeled motor vehicles, and motorcycles; automobile dashboards; automotive interior trim; axles for land vehicles; axle journals; gear boxes for land vehicles; transmissions for land vehicles; shock absorbers for automobiles; vessels in the form of boats and ships, and parts and fittings therefor.
(2) Electrical insulating materials, namely, electrical insulation; electrical insulating tapes; industrial packaging containers of rubber; chemical fiber, not for textile use, namely, asbestos fibres, aramid fibres, polyester fibres; mineral wool; slag wool for insulating electricity or sound; carbon fibres, other than for textile use; rubber thread and covered rubber yarn, not for textile use; chemical fiber yarn and thread, not for textile use, namely, asbestos yarn, asbestos thread, aramid fibre yarn, aramid fibre thread, carbon fibre thread, carbon fibre yarn; plastic sheeting for agricultural purposes; adhesive tapes, other than stationery and not for medical or household purposes, namely, adhesive packaging tapes, general use adhesive sealant tape; semi-processed plastics; polypropylene film, other than for wrapping; semi-processed synthetic resins; artificial resins, semi-processed; rubber, raw or semi-worked; gum, raw or semi-worked; synthetic rubber; soundproofing materials of mineral wool, not for building purposes; floating anti-pollution barriers; plastic film, other than for wrapping, namely, plastic films for use in manufacture; padding materials of rubber or plastics; stuffing of rubber or plastics; packing, cushioning, and stuffing materials of rubber and plastic, namely, plastic pellets for packing, plastic packing for shipping containers, rubber sheets for packing purposes, rubber packing for shipping containers, cushioning materials of rubber or plastics; shock-absorbing buffers of rubber. (1) Metal treating, namely, heat treatment of metals; metal casting services; processing of rubber; processing of plastics; ceramic processing; woodworking; food and drink preservation, namely, food canning services, food smoking, freeze drying of food; freezing of foods; pasteurising of food and beverages; fruit crushing.
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
35 - Publicité; Affaires commerciales
Produits et services
Custom manufacturing of automobile parts; custom manufacturing of resin molding products for roof of automobiles Procurement, namely, purchasing resins for automobiles, materials for automobiles, paints and raw materials of paints for automobiles, raw materials for semiconductor processing materials, chemical raw materials, automobile parts, and resin molding products for roof of automobiles; mediation and conclusion of commercial transactions for others
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
35 - Publicité; Affaires commerciales
Produits et services
Custom manufacturing of automobile parts; custom manufacturing of resin molding products for roof of automobiles Procurement, namely, purchasing resins for automobiles, materials for automobiles, paints and raw materials of paints for automobiles, raw materials for semiconductor processing materials, chemical raw materials, automobile parts, and resin molding products for roof of automobiles; mediation and conclusion of commercial transactions for others
A cup holder holding an object includes: a storing part being cylindrical and being opened at an upper portion; an opening part provided at a side wall of the storing part; a holder being biased towards an interior of the storing part and being stored inside the opening part so that the holder may protrude and retract; and a restricting part provided on the opening part, wherein the restricting part restrains a movement of the holder at a maximum storage position.
B60N 3/10 - Aménagements ou adaptations d'autres accessoires pour passagers, non prévus ailleurs de réceptacles pour nourriture ou boissons, p. ex. réfrigérés
A vehicle console with an adjustable armrest has a single operation knob at a fore-end of an armrest to open and close a storage well and to adjust position of an armrest for individual vehicle drivers. The armrest includes a pair of latch members driven by the operation knob. When the operation knob is at the end of the downward rotation, the latch members are inserted into catch holes in the console box, and the armrest is fixed to the console box in a “lock mode”. When the operation knob is halfway from the “lock mode”, the latch members are drawn out of the catch holes but remain in grooves in the console box in a “semi-lock mode”, wherein the armrest can slide along the grooves but cannot open the storage well. When the operation knob is drawn up to the end of the upward direction, the latch members are drawn out of the grooves and the armrest is in a “unlock mode” and the storage well can open and close.
In a joining structure, a protruding portion on the side of a first component is a hollow body that prevents bringing about sinking, deforming, and cracking of the side surface of the first component part, even in the event that the protruding portion is enlarged in order to increase strength for connecting the first component part and a second component part. In addition, the connecting groove on the side of the second component part is also defined by a hollow body that includes a pair of supporting ribs and a supporting plate bridging the pair of supporting ribs. Consequently, the hollow body can prevent defects of sinking, deforming, and cracking in the side surface of the second component part, even in the event that the supporting ribs and the supporting plate are increased in thickness in order to enhance the rigidity of the coupling arrangement between the first and second component parts.
