An illumination apparatus which has a standby feature whereupon switching off the light fixture, minimal standby feature operations may be implemented using an alternative power source. By turning off the light switch, the light fixture may switch from a first operating mode, such as an illumination mode, into a standby mode. While in standby mode, the light fixture may operate in the standby mode connected to a secondary power supply, such as a battery. While in the standby mode, the light fixture may operate to conserve power while ensuring that the sensor can operate along with a subset of the control circuit. Upon detection of motion while in standby mode, the secondary power supply may work in conjunction with the standby circuit to power a single, or all of the, light source(s) at a lower output powered only by the secondary power supply.
H05B 47/17 - Modes opérationnels, p. ex. passage du mode manuel au mode automatique ou interdiction d'opérations spécifiques
H02J 7/00 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries
H05B 39/06 - Dispositions de commutation, p. ex. pour passer de fonctionnement en série à fonctionnement en parallèle
H05B 45/10 - Commande de l'intensité de la lumière
H05B 47/115 - Commande de la source lumineuse en réponse à des paramètres détectés en détectant la présence ou le mouvement d'objets ou d'êtres vivants
2.
DIMMABLE LED LIGHT FIXTURE WITH ADJUSTABLE CORRELATED COLOR TEMPERATURE CHANGE (CCT) AND BRIGHTNESS PARAMETERS
Components and circuitry for controlling a bank of LEDs based on a dimmer switch and a CCT controller to maintain a brightness level while changing the color temperature of an emitted composite light, to adjust a brightness level simultaneous to changing the color temperature of the emitted composite light, and to drive the bank of LEDs to generate the composite light based on selection of one or more CCT setpoints of the CCT controller.
Components and circuitry for controlling a bank of LEDs based on a dimmer switch and a CCT controller to maintain a brightness level while changing the color temperature of an emitted composite light, to adjust a brightness level simultaneous to changing the color temperature of the emitted composite light, and to drive the bank of LEDs to generate the composite light based on selection of one or more CCT setpoints of the CCT controller.
A multi-function, electrical outlet mounted, LED light control command module provides for the control of at least two sets of color LED's of different known color, such as RGB color LED's or white color LED's mounted in a lighting unit which may be mounted, for example, under a cabinet. The control command module is mounted in an electrical outlet receptacle on a wall in close proximity to the lighting unit cabinet. The control command module is provided with manual switches to switch the LED light unit on/off and for controlling the light intensity of the resultant light. The switches also provide for the selection of a desired white light CCT color temperature and the selection of a desired colored light. Another switch provides brightness control of the resultant light selected by the user person. The control command module also has a communication module connecting port adapted to optionally receive one of two communication modules to permit remote control of the light control command module within the RF frequency range or remotely by smart electronics wireless devices.
A mounting plate assembly is disclosed having two or more spring clamp structures each being displaceably engageable with a respective guide slot formed on a rear face of the mounting plate. Each spring clamp structure has a spring support bracket provided with a bottom retention base displaceably retained captive by their guide slot. The spring support bracket may have a securing sleeve slidingly coupled thereto and displaceable along a vertical axis to the mounting plate. The spring support bracket may have a retention spring coupled thereto. The securing sleeve and the retention spring each have one or more arresting formations for retention coupling with selected ones of the two or more spaced-apart retention formations disposed spaced-apart along the guide slot when the support bracket is positioned over selected ones of the retention formations.
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
F16B 2/02 - Brides ou colliers, c.-à-d. dispositifs de fixation dont le serrage est effectué par des forces effectives autres que la résistance à la déformation inhérente au matériau dont est fait le dispositif
A light fixture includes a forward housing, a forward LED light source disposed in the forward housing and configured to project light in a forward direction, a rear housing, a rear LED light source mounted in the rear housing and configured to project light circumferentially, a switch, a power supply, and a light control circuit including dimming means. The power supply and control circuit are configured to connect to a power source, with the switch operative to selectively energize both the forward and rear LED light sources.
F21S 8/02 - Dispositifs d'éclairage destinés à des installations fixes encastrables, p. ex. plafonniers à spots lumineux
F21K 9/60 - Agencements optiques intégrés dans la source lumineuse, p. ex. pour améliorer l’indice de rendu des couleurs ou l’extraction de lumière
F21S 8/04 - Dispositifs d'éclairage destinés à des installations fixes destinés uniquement au montage sur un plafond ou sur une structure similaire en porte-à-faux
F21V 19/00 - Montage des sources lumineuses ou des supports de sources lumineuses sur ou dans les dispositifs d'éclairage
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
F21V 29/503 - Dispositions de refroidissement caractérisées par l’adaptation au refroidissement de composants spécifiques de sources lumineuses
H05B 45/10 - Commande de l'intensité de la lumière
F21S 6/00 - Dispositifs d'éclairage destinés à tenir debout tout seuls
F21Y 107/50 - Sources lumineuses comprenant des éléments générateurs de lumière disposés en trois dimensions sur des substrats ou des supports plans, mais agencés en différents plans ou avec des orientations différentes, p. ex. sur des supports en forme de plaque avec des marches sur lesquelles sont montés les éléments générateurs de lumière
F21Y 113/13 - Combinaison de sources lumineuses de couleurs différentes comprenant un ensemble de sources lumineuses ponctuelles
A mounting plate assembly is disclosed having two or more spring clamp structures each being displaceably engageable with a respective guide slot formed on a rear face of the mounting plate. Each spring clamp structure has a spring support bracket provided with a bottom retention base displaceably retained captive by their guide slot. The spring support bracket may have a securing sleeve slidingly coupled thereto and displaceable along a vertical axis to the mounting plate. The spring support bracket may have a retention spring coupled thereto. The securing sleeve and the retention spring each have one or more arresting formations for retention coupling with selected ones of the two or more spaced-apart retention formations disposed spaced-apart along the guide slot when the support bracket is positioned over selected ones of the retention formations.
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
F16B 2/02 - Brides ou colliers, c.-à-d. dispositifs de fixation dont le serrage est effectué par des forces effectives autres que la résistance à la déformation inhérente au matériau dont est fait le dispositif
The present disclosure is directed towards an LED based trimless recessed light fixture wherein the outermost diffuser lens of the recessed fixture provides illumination and extends outward covering the entire ceiling aperture. No additional decorative trim elements or baffles are required and the diffuser lens both illuminates and covers the ceiling aperture to provide a smooth illuminated unitary appearance. This outermost diffuser lens is illuminated from above by a illumination system which includes a ring support on which the LEDs may be mounted, along with an optical stack which collects light output from the LEDs and both illuminates and redirects the light through the outermost diffuser lens. This outermost diffuser lens provides appearance of smooth continuous illumination output along its entire surface and while also covering aperture edges formed in the ceiling for the recessed fixture.
A dual LED light fixture is comprised by a lower LED light source housing and an upper LED light source housing. A lower LED light source is mounted in the lower light source housing to generate downlight. An upper LED light source is mounted in the upper LED light source housing and remote from an outer circumferential light transmitting outer side area of the upper light source housing and from which is emitted side light illumination. An LED power supply and light control circuit mounted in the LED light fixture and adapted for connection to a power source. The LED light power supply and control circuit has a dimming circuit and a lower and upper driver current supply circuit. A switch is operative to connect driver current to the upper LED light source when actuated to an “on” position and to disconnect driver current to the upper LED light source when in a normal “off” position. The switch is operative for engagement to its “on” position when desirable to provide drive current to the upper light source and illumination from both the lower and upper LED light sources of the LED light fixture. Various embodiments of the LED light fixture is described.
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
F21K 9/60 - Agencements optiques intégrés dans la source lumineuse, p. ex. pour améliorer l’indice de rendu des couleurs ou l’extraction de lumière
F21S 6/00 - Dispositifs d'éclairage destinés à tenir debout tout seuls
F21S 8/02 - Dispositifs d'éclairage destinés à des installations fixes encastrables, p. ex. plafonniers à spots lumineux
F21S 8/04 - Dispositifs d'éclairage destinés à des installations fixes destinés uniquement au montage sur un plafond ou sur une structure similaire en porte-à-faux
F21V 19/00 - Montage des sources lumineuses ou des supports de sources lumineuses sur ou dans les dispositifs d'éclairage
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
F21V 29/503 - Dispositions de refroidissement caractérisées par l’adaptation au refroidissement de composants spécifiques de sources lumineuses
F21Y 107/50 - Sources lumineuses comprenant des éléments générateurs de lumière disposés en trois dimensions sur des substrats ou des supports plans, mais agencés en différents plans ou avec des orientations différentes, p. ex. sur des supports en forme de plaque avec des marches sur lesquelles sont montés les éléments générateurs de lumière
F21Y 113/13 - Combinaison de sources lumineuses de couleurs différentes comprenant un ensemble de sources lumineuses ponctuelles
A mounting plate assembly has a mounting plate for mounting a light fixture in holes of different diameters and wherein a guide rail assembly is secured to a rear face of the mounting plate on opposed sides of an aperture. Each guide rail assembly has a novel displaceable spring clamp structure having to a displaceable base coupled for sliding displacement along a guide rail assembly. Spring biasing elements are provided between the displaceable base and the guide rail assembly to urge a bottom face of the displaceable base against a flat top surface of a mounting base to which the guide rails are secured. A retention formation is provided in the bottom surface of the displaceable base for retention coupling with a selected on of space-apart engageable retainers immovably secured to the flat top surface of the mounting base and aligned with the retention formation to arrest the displaceable base at a desired location to position the spring clamp structures at a desired location with respect to the size of a hole formed in the sheet material and to which a light fixture is to be secured.
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
F21S 8/00 - Dispositifs d'éclairage destinés à des installations fixes
F21S 8/02 - Dispositifs d'éclairage destinés à des installations fixes encastrables, p. ex. plafonniers à spots lumineux
09 - Appareils et instruments scientifiques et électriques
11 - Appareils de contrôle de l'environnement
35 - Publicité; Affaires commerciales
Produits et services
Electric Door chimes; electric doorbells; extension cords; LED display panels; thermostats Ceiling fans; indoor lighting fixtures; led lamps; lightbulbs; outdoor lighting fixtures; professional and industrial fluorescent work
lights; Indoor and outdoor security lighting; portable table and floor lamps; undercabinet lighting installations; electric track lighting
units; electric night lights; recessed lighting, namely, detachable trims and recessed fixtures sold together; LED chandelier lights
and LED pendant lights; indoor and outdoor electric wall sconces; vanity lighting fixtures; novelty lighting fixtures; outdoor lighting
fixtures in the nature of deck lights; indoor and outdoor decorative electric lighting fixtures Wholesale distribution of lightbulbs, indoor and outdoor electric lighting products and electric supplies
A light fixture includes a lower housing, a lower LED light source disposed in the lower housing and configured to project downlight, an upper housing, an upper LED light source mounted in the upper housing and configured to project rear or sidelight, a switch, a power supply, and a light control circuit including dimming means. The power supply and control circuit are configured to connect to a power source, with the switch operative to selectively energize both the lower and upper LED light sources.
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
F21K 9/60 - Agencements optiques intégrés dans la source lumineuse, p. ex. pour améliorer l’indice de rendu des couleurs ou l’extraction de lumière
F21S 8/02 - Dispositifs d'éclairage destinés à des installations fixes encastrables, p. ex. plafonniers à spots lumineux
F21S 8/04 - Dispositifs d'éclairage destinés à des installations fixes destinés uniquement au montage sur un plafond ou sur une structure similaire en porte-à-faux
F21V 19/00 - Montage des sources lumineuses ou des supports de sources lumineuses sur ou dans les dispositifs d'éclairage
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
F21V 29/503 - Dispositions de refroidissement caractérisées par l’adaptation au refroidissement de composants spécifiques de sources lumineuses
H05B 45/10 - Commande de l'intensité de la lumière
F21S 6/00 - Dispositifs d'éclairage destinés à tenir debout tout seuls
F21Y 107/50 - Sources lumineuses comprenant des éléments générateurs de lumière disposés en trois dimensions sur des substrats ou des supports plans, mais agencés en différents plans ou avec des orientations différentes, p. ex. sur des supports en forme de plaque avec des marches sur lesquelles sont montés les éléments générateurs de lumière
F21Y 113/13 - Combinaison de sources lumineuses de couleurs différentes comprenant un ensemble de sources lumineuses ponctuelles
A dual LED light fixture is comprised by a lower LED light source housing and an upper LED light source housing. A lower LED light source is mounted in the lower light source housing to generate downlight. An upper LED light source is mounted in the upper LED light source housing and remote from an outer circumferential light transmitting outer side area of the upper light source housing and from which is emitted side light illumination. An LED power supply and light control circuit mounted in the LED light fixture and adapted for connection to a power source. The LED light power supply and control circuit has a dimming circuit and a lower and upper driver current supply circuit. A switch is operative to connect driver current to the upper LED light source when actuated to an “on” position and to disconnect driver current to the upper LED light source when in a normal “off” position. The switch is operative for engagement to its “on” position when desirable to provide drive current to the upper light source and illumination from both the lower and upper LED light sources of the LED light fixture. Various embodiments of the LED light fixture is described.
F21Y 107/50 - Sources lumineuses comprenant des éléments générateurs de lumière disposés en trois dimensions sur des substrats ou des supports plans, mais agencés en différents plans ou avec des orientations différentes, p. ex. sur des supports en forme de plaque avec des marches sur lesquelles sont montés les éléments générateurs de lumière
F21S 6/00 - Dispositifs d'éclairage destinés à tenir debout tout seuls
The present disclosure is directed towards an LED based trimless recessed light fixture wherein the outermost diffuser lens of the recessed fixture provides illumination and extends outward covering the entire ceiling aperture. No additional decorative trim elements or baffles are required and the diffuser lens both illuminates and covers the ceiling aperture to provide a smooth illuminated unitary appearance. This outermost diffuser lens is illuminated from above by an illumination system which includes a ring support on which the LEDs may be mounted, along with an optical stack which collects light output from the LEDs and both illuminates and redirects the light through the outermost diffuser lens. This outermost diffuser lens provides appearance of smooth continuous illumination output along its entire surface and while also covering aperture edges formed in the ceiling for the recessed fixture.
A mounting plate assembly has a mounting plate for mounting a light fixture in holes of different diameters and wherein a guide rail assembly is secured to a rear face of the mounting plate on opposed sides of an aperture. Each guide rail assembly has a novel displaceable spring clamp structure having to a displaceable base coupled for sliding displacement along a guide rail assembly. Spring biasing elements are provided between the displaceable base and the guide rail assembly to urge a bottom face of the displaceable base against a flat top surface of a mounting base to which the guide rails are secured. A retention formation is provided in the bottom surface of the displaceable base for retention coupling with a selected one of space-apart engageable retainers immovably secured to the flat top surface of the mounting base and aligned with the retention formation to arrest the displaceable base at a desired location to position the spring clamp structures at a desired location with respect to the size of a hole formed in the sheet material and to which a light fixture is to be secured.
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
F21S 8/00 - Dispositifs d'éclairage destinés à des installations fixes
09 - Appareils et instruments scientifiques et électriques
11 - Appareils de contrôle de l'environnement
Produits et services
Smart LED light bulbs, smart LED lighting fixtures, smart recessed lighting fixtures, smart electrical plugs, smart motion security
sensors, smart electric switches, smart electric light dimmers for walls and outdoor security cameras Smart landscape garden lights, smart novelty lights and smart strip lights for both decorative and indoor purposes
A mounting plate assembly has a mounting plate for mounting a light fixture in holes of different diameters. A guide rail assembly is secured to a rear face of the mounting plate on opposed sides of an aperture. Each guide rail assembly has a displaceable spring clamp structure mounted on a displaceable base coupled for sliding displacement along the guide rail assembly. Spring biasing elements are provided between the displaceable base and the guide rail assembly to urge a bottom face of the displaceable base against a flat top surface of a mounting base to which the guide rails are secured. A retention formation is provided in the bottom surface of the displaceable base for retention coupling with a selected one of space-apart engageable retainers immovably secured to the flat top surface of the mounting base and aligned with the retention formation to arrest the displaceable base at a desired location to position the spring clamp structures at a desired location with respect to the size of a hole formed in the sheet material and to which a light fixture is to be secured.
F16M 13/02 - Autres supports ou appuis pour positionner les appareils ou les objetsMoyens pour maintenir en position les appareils ou objets tenus à la main pour être portés par un autre objet ou lui être fixé, p. ex. à un arbre, une grille, un châssis de fenêtre, une bicyclette
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
Wholesale distributorship of light bulbs, incandescent and halogen light bulbs, LED light bulbs, smart LED light bulbs, smart LED lamps, smart security lighting for indoor and outdoor use, smart electric plugs, smart power strips, smart tape lighting, smart lighting for use in lawns and gardens, smart panel lights, smart recessed lighting, smart ceiling fans, smart power strips, smart extension cords, smart electric switches, smart electric dimmers, smart night lights, indoor and outdoor smart cameras and doorbells, smart sensors, night lights, ceiling light fixtures, indoor and outdoor security lighting, work lights, shop lights, track lighting, floor, table, desk and wall mounted lamps and lighting, electric lamps, outdoor electric lights for use in lawns and gardens, specialty task lighting fixtures, track lighting, deck lights, recessed lighting, namely, detachable trims and recessed fixtures sold together, insulation boxes and vapor barriers, flexible rope lighting and motifs, electric power strips, electric plugs, electric extension cords, electric wall switches, electric wall receptacles, electric dimmers, electric timers, USB charging cables and mobile accessories, electric wall taps, landscape lighting and tape lights, namely, strip lights for indoor and outdoor use, desktop charging stations including electrical outlets, USB ports and wireless charging, electric circulating fans for commercial and residential use, ceiling fans with lights, bathroom hardware accessories, under cabinet lights, closet, drawer, path and hallway lights, string lights, flexible lighting strips, battery operated lights, rechargeable battery lights, projection lights and lasers, indoor and outdoor integrated and retrofit recessed lights, commercial panel, troffer, wrap and puff lights, novelty and interactive lights, grow lights, namely, fluorescent, incandescent and LED lights and bulbs which provide the right light spectrum to grow plants indoors from seeds and seedlings and toys with lights
Deck lights excluding spherical and globe shaped bulbs; recessed lighting, namely, detachable trims and recessed fixtures sold together; flexible rope lighting and motifs being LED light strips for decorative purposes
LED outdoor security lights; LED security lights; and LED light bulbs; LED recessed lighting; LED flush mounts; LED wall lights; LED pendant lights; LED table lamps; LED vanity fixtures; LED floor lamps; LED desk lamps; LED work lights; LED night lights; LED battery-operated lamps; LED rechargeable lamps; LED chandelier lights; LED panel lights; LED inspection lights; LED lanterns; LED track lights; LED task lights; LED post mounts
A surface mountable spotlight is comprised by a light directing housing having a rear mounting plate. A light emitting source is mounted in the light directing housing for emitting light out of the open end of the housing. The mounting plate has a contour configuration adapted to conceal a mounting opening formed in a support sheet material behind which is located an electrical connection to a power source. An electrical connector is mounted in the rear surface of the rear mounting plate. Retention spring arms are secured to the rear surface of the rear mounting plate which permits for removable attachment of the rear mounting plate against an inner surface of the support sheet material. A junction box is adapted for connection to the power source and to the electrical connector to supply power to the light emitting source which in a preferred embodiment is an LED light source.
F21S 8/04 - Dispositifs d'éclairage destinés à des installations fixes destinés uniquement au montage sur un plafond ou sur une structure similaire en porte-à-faux
F21S 8/00 - Dispositifs d'éclairage destinés à des installations fixes
F21V 23/06 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des dispositifs de couplage
An LED light fixture, in the form of lamps or luminaires, is comprised on a plurality of LED lights producing bright white or warm light and a plurality of color LED lights producing light of a visibly different color. The fixture includes control circuitry for receiving an input voltage signal from a dimmer switch wherein when the dimmer switch reduces the input voltage to the LED light fixture within a top range setting of the dimmer switch, the brightness of the light is maintained while the color Kelvin temperature of the light spectrum is reduced. If the dimmer switch is increased in the top range, the color temperature increases. This is achieved by increasing the frequency of a reduced input voltage signal during a reduction of the dimmer switch in the top range thereof to supply full driver current to the white or warm light LED's while reducing the driver current to the color LED's. When the dimmer switch is operated below the top range both drive currents to the while and color LED's is reduced to provide a warm relaxing light spectrum but with substantially high luminosity/brightness.
H05B 45/46 - Détails des circuits de charge à LED avec un contrôle actif à l'intérieur d'une matrice de LED les diodes étant disposées parallèlement
H05B 45/3575 - Émulation des caractéristiques électriques ou fonctionnelles des lampes incandescentes utilisant des charges factices ou des circuits de purge, p. ex. des variateurs de lumière
43.
Recessed light fixture assembly with interchangeable trim collar
A recessed light fixture assembly for securement in a hole formed in a sheet material and wherein the assembly is comprised of a light source support module having an electrical connector for securing a power source thereto for energising the light source, Two or more open-ended light constraining tubular members are each adapted for immovable securement to the light source support module for interconnecting a selected one of the two or more open-ended light constraining tubular members to the light source support module. A first one of the two or more open-ended light constraining tubular members has a trim collar extending in a transverse plane about an outer end thereof. A further of the open-ended light constraining tubular members has a plaster collar extending in a transverse plane spaced a predetermined distance about an outer end thereof. The light source support module has a retention mechanism to retain the recessed light fixture with the selected one of the first and further open-ended light constraining tubular members connected thereto in the hole with its collar held firmly against an outer surface of the sheet material about the hole.
A system and method for independently adjusting the correlated color temperature (CCT) and brightness of a light source having two or more color LED's or LED sets, with each color LED or LED set having a different correlated color temperature. A user person can selectively enable a selected one of the two or more color LED's or LED sets and adjust the brightness thereof and repeat the selection of the second color LED or LED set and adjust the brightness thereof. By independently selecting the color LED or LED set and modifying the brightness thereof, a desired light atmosphere can be created by adjusting the output color mixture of the LED's or LED sets and controlling the brightness of the combination of the color LED's or LED sets. The selection of individual color LED's and the brightness adjustment thereof can be made by a mechanical operable control device or by remote wireless control device.
09 - Appareils et instruments scientifiques et électriques
11 - Appareils de contrôle de l'environnement
Produits et services
Smart electric plugs which can be activated remotely through the internet; motion security sensors for lights, motion security sensors for windows and doors, water level sensors, indoor security cameras, indoor and outdoor security cameras, electric video door bells, power strips; wall taps, namely, grounded electrical outlets, electric outlets; in-wall electrical receptacles, namely, tamper-resistant grounded electrical outlets, and in-wall electric light dimmers; downloadable mobile application for use on handheld devices for remotely activating, monitoring and controlling smart electric plugs, motion security sensors for lights, motion security sensors for windows and doors, water level sensors, indoor security cameras, indoor and outdoor security cameras, electric video door bells, power strips, wall taps, namely, grounded electrical outlets, electric outlets, in-wall electrical receptacles, namely, tamper-resistant electrical grounded outlets, in-wall light electric dimmers, smart LED light bulbs which can be activated remotely through the internet, light fixtures, recessed lighting fixtures, outdoor lighting fixtures, ceiling lights, landscape lighting and tape lights, namely strip lights for indoor use Smart LED light bulbs which can be activated remotely through the internet; light fixtures, recessed lighting fixtures, outdoor lighting fixtures, ceiling lights, landscape lighting and tape lights, namely, strip lights for indoor use
09 - Appareils et instruments scientifiques et électriques
11 - Appareils de contrôle de l'environnement
Produits et services
(Based on Use in Commerce) Power bars in the nature of extension cords; power bars in the nature of voltage surge protectors; (Based on Use in Commerce and Based on 44(e)) Timers in the nature of indoor and outdoor electrical and digital timers (Based on Use in Commerce and Based on 44(e)) Desk lamps, excluding light bulbs; novelty electric lighting fixtures, excluding light bulbs; vanity lighting fixtures, excluding light bulbs
09 - Appareils et instruments scientifiques et électriques
11 - Appareils de contrôle de l'environnement
35 - Publicité; Affaires commerciales
Produits et services
Electric fuses, electric power extension cords, electric power supplies, namely, electric taps, power bars and power stakes, indoor and outdoor timed and motion-sensitive security lighting, waterproof electrical outlet boxes and covers therefor for outdoor use Electric light bulbs excluding spherical and globe shaped bulbs, electric fan lights, electric night lights, electric wall and ceiling light fixtures excluding spherical and globe shaped bulbs or glass coverings, electric lamps, electric table lamps, electric floor lamps, electric lighting fixtures excluding spherical and globe shaped bulbs or glass coverings, namely, electric work lights, electric shop lights, specialty task lighting fixtures, LED lamps, outdoor electric lights used in lawns and gardens, electric lights for cabinets, indoor and outdoor electric lighting fixtures, electric track lighting Wholesale distributorships featuring electric bulbs excluding spherical and globe shaped bulbs, electrical supplies and lighting products
