A smart light switch includes a housing, a light actuator, and a processor and memory. The processor is adapted to selectively turn an electrical load on and off in accordance with a programmed set of light activation rules stored in memory. The processor is operable to determine whether the smart light switch is in an On or Off state and create a historical record of the On or Off state of the smart light switch over time. A user is selectively able to place the smart light switch in a vacation mode. The processor suspends the programmed set of light activation rules, determines a probability that the smart light switch would have been turned on based upon the historical record, and probabilistically activates and deactivates the smart light switch for a period of time based upon the historical record while the smart light switch was not in vacation mode.
H05B 47/19 - Commande de la source lumineuse par télécommande via une transmission sans fil
H01H 9/54 - Circuits non adaptés à une application particulière du dispositif de commutation non prévus ailleurs
H05B 47/105 - Commande de la source lumineuse en réponse à des paramètres détectés
G05B 15/02 - Systèmes commandés par un calculateur électriques
H05B 47/115 - Commande de la source lumineuse en réponse à des paramètres détectés en détectant la présence ou le mouvement d'objets ou d'êtres vivants
H05B 47/13 - Commande de la source lumineuse en réponse à des paramètres détectés en détectant la présence ou le mouvement d'objets ou d'êtres vivants en utilisant des détecteurs infrarouges passifs
A control device, such as a smart thermostat, employs solid state relays as switches to activate and deactivate systems controlled by the device. By measuring the current flow through the power buses to one or more of the solid state relays of the control device, potentially damaging over current conditions can be distinguished from permissible transient over-current conditions and the control device can deactivate any solid state relays which would be damaged while allowing solid state relays which are experiencing allowable transients to remain operating. In the case of a severe over current condition, a current monitoring device can issue a fault signal, triggering an interrupt condition which will cause a processor in the controller to shut down the affected solid state relays very quickly.
G05B 19/042 - Commande à programme autre que la commande numérique, c.-à-d. dans des automatismes à séquence ou dans des automates à logique utilisant des processeurs numériques
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
F24F 11/52 - Aménagements pour l’indication, p. ex. écrans
H02H 7/22 - Circuits de protection de sécurité spécialement adaptés aux machines ou aux appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou de ligne, et effectuant une commutation automatique dans le cas d'un changement indésirable des conditions normales de travail pour appareillage de distribution, p. ex. système de barre omnibusCircuits de protection de sécurité spécialement adaptés aux machines ou aux appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou de ligne, et effectuant une commutation automatique dans le cas d'un changement indésirable des conditions normales de travail pour dispositifs de commutation
H02H 3/093 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à une surcharge avec des moyens de temporisation
F24F 11/46 - Amélioration de l’efficacité électrique ou économie d’énergie électrique
H02H 6/00 - Circuits de protection de sécurité sensibles à des changements indésirables des conditions non électriques normales de travail et utilisant des dispositifs simulateurs de l'appareil protégé, p. ex. utilisant des images thermiques
A control device for an HVAC fan control unit includes at least one sensor to provide a signal to the control device to determine the temperature of the working fluid supplied to a coil in the fan control unit. In a first configuration, the sensor determines if the working fluid is above or below a preselected temperature and the control device employs the signal from the sensor to determine if the fan control unit is in a heating or cooling mode. In a second configuration, the sensor measures the temperature of the working fluid and the control device employs the signal from the sensor to determine the heating, or cooling, ability of the fan control unit when utilizing the supplied working fluid. With two-pipe fan control units, a single sensor is employed on the working fluid supply pipe and a single signal representing the working fluid temperature is supplied to the control device. With four-pipe fan control units, a sensor is respectively employed on each of the heating fluid supply pipe and the cooling fluid supply pipe and two signals, each representing the temperature of a respective one of the cooling working fluid and heating working fluid, is supplied to the control device.
F24F 11/83 - Systèmes de commande caractérisés par leurs grandeurs de sortieDétails de construction de tels systèmes pour la commande de la température de l’air fourni en commandant l’apport en fluides échangeurs de chaleur aux échangeurs de chaleur
A smart light switch includes a control block and heat generating components such as a light actuator, a processor and memory, a data communications module, and an environmental sensor. The processor is operable to receive as an input a measured temperature value from the environmental sensor and a power consumption value from the of heat generating components. The processor is operable to select a temperature offset value from a dataset of temperature offset values that is stored in memory. Each temperature offset value stored in the dataset of temperature offset values is associated with a potential combination of power consumption inputs. The processor is further operable to determine a calibrated temperature value from the measured temperature value adjusted by the temperature offset values selected from the dataset of temperature offset values.
H02J 3/14 - Circuits pour réseaux principaux ou de distribution, à courant alternatif pour règler la tension dans des réseaux à courant alternatif par changement d'une caractéristique de la charge du réseau par interruption, ou mise en circuit, des charges du réseau, p. ex. charge équilibrée progressivement
H02P 29/40 - Régulation ou commande de la quantité de courant consommé ou fourni par le moteur pour commander la charge mécanique
H05B 47/19 - Commande de la source lumineuse par télécommande via une transmission sans fil
H05B 47/105 - Commande de la source lumineuse en réponse à des paramètres détectés
H05B 47/00 - Circuits pour faire fonctionner des sources lumineuses en général, c.-à-d. où le type de source lumineuse n'est pas important
A smart light switch includes a housing, a light actuator located within the housing, and a processor and memory. The processor and memory are operably connected and located within the housing. The processor is adapted to selectively turn an electrical load on and off in accordance with a program schedule stored in memory. The smart light switch further includes a data communications module operable to provide data communication across a wireless network to a remote device. The program schedule includes time periods and a set of light activation rules for each time period. The smart light switch is operable to receive the time periods from a remote device having a different set of rules than the set of light activation rules for the smart light switch.
H05B 47/16 - Commande de la source lumineuse par des moyens de minutage
H01H 9/00 - Détails de dispositifs de commutation non couverts par
G05D 23/19 - Commande de la température caractérisée par l'utilisation de moyens électriques
H05B 47/11 - Commande de la source lumineuse en réponse à des paramètres détectés en détectant la luminosité ou la température de couleur de la lumière ambiante
H05B 47/19 - Commande de la source lumineuse par télécommande via une transmission sans fil
A smart light switch includes a housing, a light actuator, and a processor and memory. The processor is adapted to selectively turn an electrical load on and off in accordance with a programmed set of light activation rules stored in memory. The processor is operable to determine whether the smart light switch is in an On or Off state and create a historical record of the On or Off state of the smart light switch over time. A user is selectively able to place the smart light switch in a vacation mode. The processor suspends the programmed set of light activation rules, determines a probability that the smart light switch would have been turned on based upon the historical record, and probabilistically activates and deactivates the smart light switch for a period of time based upon the historical record while the smart light switch was not in vacation mode.
A system including at least one computerized device with voice command capability processed remotely includes a low power processor, executing a loose algorithmic model to recognize a wake word prefix in a voice command, the loose model having a low false rejection rate but suffering a high false acceptance rate, and a second processor which can operate in at least a low power/low clock rate mode and a high power/high clock rate mode. When the first processor determines the presence of the wake word, it causes the second processor to switch to the high power/high clock rate mode and to execute a tight algorithmic model to verify the presence of the wake word. By using the two processors in this manner, the average overall power required by the computerized device is reduced, as is the amount of waste heat generated by the system.
G10L 15/30 - Reconnaissance distribuée, p. ex. dans les systèmes client-serveur, pour les applications en téléphonie mobile ou réseaux
G06F 12/0802 - Adressage d’un niveau de mémoire dans lequel l’accès aux données ou aux blocs de données désirés nécessite des moyens d’adressage associatif, p. ex. mémoires cache
F24F 11/64 - Traitement électronique utilisant des données mémorisées au préalable
Embodiments of the present invention provide a method and system for dynamically controlling an appliance based on information received from a wearable device, to regulate the user's health. A wearable device is identified and configured to monitor at least one physiological aspect of the user. A controllable appliance with at least one sensor and at least one controllable setting is also identified. Health information of the user is received and utilized in generating, a user profile which comprises parameters related to the health of the user. Data from the wearable device and date from the controllable appliance is analyzed and it is determined whether the data matches the parameters related to the health of the user. If the data does not match the parameters related to the health of the user, then at least one controllable setting of the at least one controllable appliance is adjusted.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G16H 40/63 - TIC spécialement adaptées à la gestion ou à l’administration de ressources ou d’établissements de santéTIC spécialement adaptées à la gestion ou au fonctionnement d’équipement ou de dispositifs médicaux pour le fonctionnement d’équipement ou de dispositifs médicaux pour le fonctionnement local
G05B 15/02 - Systèmes commandés par un calculateur électriques
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
A leak sensing cable for a leak detector having an impedance sensor operable to measure changes in impedance along a sensing circuit. The leak sensing cable comprises: an inner core, having a first conductive thread electrically connected to the sensing circuit; an inner sheath, coaxially located around the inner core, the inner core being comprised of a permeable, non-conductive material; an outer sheath, coaxially located around the inner sheath, the outer sheath comprising a permeable braided material and having a second conductive thread woven into the permeable braided material, the second conductive thread being electrically connected to the sensing circuit. The first conductive thread is substantially electrically isolated from the second conductive thread when the leak sensing cable is dry and less electrically isolated from the second conductive thread when the leak sensing cable becomes wet.
G01M 3/16 - Examen de l'étanchéité des structures ou ouvrages vis-à-vis d'un fluide par utilisation d'un fluide ou en faisant le vide par détection de la présence du fluide à l'emplacement de la fuite en utilisant des moyens de détection électrique
G08B 21/20 - Alarmes de situation réagissant à l'humidité
A method and system for providing HVAC signaling over a two-wire circuit is disclosed which also provides operating power for a thermostat. The system is relatively inexpensive to implement and produces only low levels of heat at the sender unit to avoid adversely affecting the ability of the thermostat to monitor the temperature of its surroundings.
A computerized device with voice command capability processed remotely includes a low power processor, executing a loose algorithmic model to recognize a wake word prefix in a voice command, the loose model having a low false rejection rate but suffering a high false acceptance rate, and a second processor which can operate in at least a low power/low clock rate mode and a high power/high clock rate mode. When the first processor determines the presence of the wake word, it causes the second processor to switch to the high power/high clock rate mode and to execute a tight algorithmic model to verify the presence of the wake word. By using the two processors in this manner, the average overall power required by the computerized device is reduced, as is the amount of waste heat generated by the system.
G10L 15/32 - Reconnaisseurs multiples utilisés en séquence ou en parallèleSystèmes de combinaison de score à cet effet, p. ex. systèmes de vote
G10L 15/30 - Reconnaissance distribuée, p. ex. dans les systèmes client-serveur, pour les applications en téléphonie mobile ou réseaux
G06F 12/0802 - Adressage d’un niveau de mémoire dans lequel l’accès aux données ou aux blocs de données désirés nécessite des moyens d’adressage associatif, p. ex. mémoires cache
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
F24F 11/64 - Traitement électronique utilisant des données mémorisées au préalable
Managing an entryway for a building includes a computer system accessing identity data providing unique biometric identifications and associated names for respective people. Roles are stored and associated with people. Rules are stored and configured to define roles or people and define conditions and actions. A certain rule includes presence of a person at an entryway and a person in at a different location than the entryway as a condition. A named person is identified by the computer system comparing identity data to biometric data received for a person at the entryway. The computer system performs a defined action for the certain rule responsive to determining that the certain rule defines a role associated with the identified, named person at the entryway and responsive to detecting by a sensor in the building that a person is present in the building at a different location than the entryway.
E05F 15/73 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible au déplacement ou à la présence de personnes ou d’objets
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
G05B 15/02 - Systèmes commandés par un calculateur électriques
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
A control device, such as a smart thermostat, employs solid state relays as switches to activate and deactivate systems controlled by the device. Current flows through at least some of the solid state relays are monitored to determine the bulk heating produced in the solid state relays, and their associated circuitry and printed circuit board traces, and this determined amount of bulk heat is added to other determined amounts of bulk heat and is used to compensate the reading provided by temperature sensors within the control device which have been affected by the bulk heat. Further, by measuring the current flow through the power buses to one or more of the solid state relays of the control device, potentially damaging over current conditions can be distinguished from permissible transient over-current conditions and the control device can deactivate any solid state relays which would be damaged while allowing solid state relays which are experiencing allowable transients to remain operating. In the case of a severe over current condition, a current monitoring device can issue a fault signal, triggering an interrupt condition which will cause a processor in the controller to shut down the affected solid state relays very quickly.
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
H02H 3/093 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à une surcharge avec des moyens de temporisation
F24F 11/46 - Amélioration de l’efficacité électrique ou économie d’énergie électrique
F24F 11/52 - Aménagements pour l’indication, p. ex. écrans
H02H 7/22 - Circuits de protection de sécurité spécialement adaptés aux machines ou aux appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou de ligne, et effectuant une commutation automatique dans le cas d'un changement indésirable des conditions normales de travail pour appareillage de distribution, p. ex. système de barre omnibusCircuits de protection de sécurité spécialement adaptés aux machines ou aux appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou de ligne, et effectuant une commutation automatique dans le cas d'un changement indésirable des conditions normales de travail pour dispositifs de commutation
F24F 11/64 - Traitement électronique utilisant des données mémorisées au préalable
H02H 6/00 - Circuits de protection de sécurité sensibles à des changements indésirables des conditions non électriques normales de travail et utilisant des dispositifs simulateurs de l'appareil protégé, p. ex. utilisant des images thermiques
G05B 19/042 - Commande à programme autre que la commande numérique, c.-à-d. dans des automatismes à séquence ou dans des automates à logique utilisant des processeurs numériques
Embodiments are described for logging in to a location-specific user account on a host system. An example method includes sending, by a user device, as part of a login request, an authentication image. The method further includes receiving an authentication response from the host system based on determining whether the login request is sent from an authorized login-location, which is based on a comparison of the authentication image with a reference image captured at the authorized login-location. The method further includes, in response to the authentication image matching the reference image within a predetermined threshold range, receiving access to the user account based on the authentication response.
G06F 21/00 - Dispositions de sécurité pour protéger les calculateurs, leurs composants, les programmes ou les données contre une activité non autorisée
G06F 21/36 - Authentification de l’utilisateur par représentation graphique ou iconique
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
24.
Control device with current protected solid state relays
A control device, such as a smart thermostat, employs solid state relays as switches to activate and deactivate systems controlled by the device. Current flows through at least some of the solid state relays are monitored to determine the bulk heating produced in the solid state relays, and their associated circuitry and printed circuit board traces, and this determined amount of bulk heat is added to other determined amounts of bulk heat and is used to compensate the reading provided by temperature sensors within the control device which have been affected by the bulk heat. Further, by measuring the current flow through the power buses to one or more of the solid state relays of the control device, potentially damaging over current conditions can be distinguished from permissible transient over-current conditions and the control device can deactivate any solid state relays which would be damaged while allowing solid state relays which are experiencing allowable transients to remain operating. In the case of a severe over current condition, a current monitoring device can issue a fault signal, triggering an interrupt condition which will cause a processor in the controller to shut down the affected solid state relays very quickly.
H02H 3/093 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à une surcharge avec des moyens de temporisation
F24F 11/00 - Aménagements de commande ou de sécurité
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
F24F 11/46 - Amélioration de l’efficacité électrique ou économie d’énergie électrique
F24F 11/64 - Traitement électronique utilisant des données mémorisées au préalable
F24F 11/52 - Aménagements pour l’indication, p. ex. écrans
Embodiments of the present invention provide a method and system for dynamically controlling an appliance based on information received from a wearable device, to regulate the user's health. A wearable device is identified and configured to monitor at least one physiological aspect of the user. A controllable appliance with at least one sensor and at least one controllable setting is also identified. Health information of the user is received and utilized in generating, a user profile which comprises parameters related to the health of the user. Data from the wearable device and data from the controllable appliance is analyzed and it is determined whether the data matches the parameters related to the health of the user. If the data does not match the parameters related to the health of the user, then at least one controllable setting of the at least one controllable appliance is adjusted.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
F24F 11/00 - Aménagements de commande ou de sécurité
Embodiments are described for logging in to a location-specific user account on a host system. An example method includes sending, by a user device, as part of a login request, an authentication image. The method further includes receiving an authentication response from the host system based on determining whether the login request is sent from an authorized login-location, which is based on a comparison of the authentication image with a reference image captured at the authorized login-location. The method further includes, in response to the authentication image matching the reference image within a predetermined threshold range, receiving access to the user account based on the authentication response.
G06F 21/00 - Dispositions de sécurité pour protéger les calculateurs, leurs composants, les programmes ou les données contre une activité non autorisée
G06F 21/36 - Authentification de l’utilisateur par représentation graphique ou iconique
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
27.
Automated notification muting responsive to predicted location
In response to determining a physical presence of a person within a geographic micro-location area defined by virtual micro-location area boundaries, a computer processor determines a dwell time as an elapsed time that the person dwells within the micro-location area after determining the physical presence of the person. In response to the dwell time meeting a message trigger threshold, the computer processor determines whether the person is likely to be within the micro-location area at the end of a relevancy time period as a function of current geographic location position of the person, speed and direction of motion of the person, and distance to the micro-location area boundaries. If unlikely that the person will be within the micro-location area at the end of the relevancy time period, the processor mutes transmission to the person of a message associated with dwelling within the micro-location area for the trigger time.
Managing an application zone is provided. A request is received from a program on a client device to enter a zone of an application that provides a service. In response to determining that the zone does not currently exist in the application, the zone is generated in the application based on defined parameters of the zone. An enter notification is sent to the program on the client device indicating that the zone is ready for the program to enter to receive the service.
A surveillance detection apparatus for detecting an intruder to a restricted space includes a short range radio transceiver and a processor. The short range radio transceiver, which has a predefined limited range, causes the surveillance detection apparatus to send an intrusion signal to the processor in response to the short range radio transceiver receiving a short range radio signal from a communication device that is in the possession of an intruder, who is not pre-authorized by the processor to be within the predefined limited range of the short range radio transceiver, and thus the restricted space. In response to determining that the communication device is not pre-authorized to be within the predefined limited range of the short range radio transceiver, the processor generates an intruder alert.
G08B 13/00 - Alarmes contre les cambrioleurs, les voleurs ou tous intrus
H04W 4/00 - Services spécialement adaptés aux réseaux de télécommunications sans filLeurs installations
G08B 13/18 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte
H04L 29/12 - Dispositions, appareils, circuits ou systèmes non couverts par un seul des groupes caractérisés par le terminal de données
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
H04N 5/33 - Transformation des rayonnements infrarouges
Embodiments of the present invention provide a method and system for dynamically controlling an appliance based on information received from a wearable device, to regulate the user's health. A wearable device is identified and configured to monitor at least one physiological aspect of the user. A controllable appliance with at least one sensor and at least one controllable setting is also identified. Health information of the user is received and utilized in generating, a user profile which comprises parameters related to the health of the user. Data from the wearable device and data from the controllable appliance is analyzed and it is determined whether the data matches the parameters related to the health of the user. If the data does not match the parameters related to the health of the user, then at least one controllable setting of the at least one controllable appliance is adjusted.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G05B 15/02 - Systèmes commandés par un calculateur électriques
F24F 11/30 - Aménagements de commande ou de sécurité en relation avec le fonctionnement du système, p. ex. pour la sécurité ou la surveillance
Embodiments of the present invention provide a method and system for dynamically controlling an appliance based on information received from a wearable device, to regulate the user's health. A wearable device is identified and configured to monitor at least one physiological aspect of the user. A controllable appliance with at least one sensor and at least one controllable setting is also identified. Health information of the user is received and utilized in generating, a user profile which comprises parameters related to the health of the user. Data from the wearable device and data from the controllable appliance is analyzed and it is determined whether the data matches the parameters related to the health of the user. If the data does not match the parameters related to the health of the user, then at least one controllable setting of the at least one controllable appliance is adjusted.
G05B 15/02 - Systèmes commandés par un calculateur électriques
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
An intelligent thermostat control system for a building, such as a residential home, that automatically adjusts a thermostat setting in the home based on real-time data continually received from mobile devices and/or social media files associated with the residents. This allows the thermostat controller to override the explicit programmed settings with implicit settings based on activity analysis taking the actual locations and schedules of the residents into account. The intelligent thermostat controller may control different zones differently to take into account the schedules and locations of specific residents associated with specific zones. The temperature controller may also adaptively learn a number of parameters based on monitored data, such as travel times and heating/cooling times for the zones based, to determine times for adjusting the thermostats.
F24F 11/00 - Aménagements de commande ou de sécurité
G05D 23/19 - Commande de la température caractérisée par l'utilisation de moyens électriques
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G05B 13/02 - Systèmes de commande adaptatifs, c.-à-d. systèmes se réglant eux-mêmes automatiquement pour obtenir un rendement optimal suivant un critère prédéterminé électriques
G05B 15/02 - Systèmes commandés par un calculateur électriques
H04W 4/02 - Services utilisant des informations de localisation
H04W 4/04 - dans un environnement spécialisé, p.ex. des immeubles ou des véhicules
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
An automated, computerized, method of pro-active building protection from weather condition damage involves: receiving a weather alert indicating a particular weather condition will be occurring within an area encompassing a perimeter about a building established by multiple sensors positioned around the building; in response to the weather alert, automatically executing a specific protocol to cause at least some actuators connected to protective devices of the building to change at least one protective device from a non-protective to a protective position; receiving a signal that is one of: a) a cancellation signal that the weather alert is no longer in effect, or b) an indication from at least some of the sensors that the particular weather condition is no longer endangers the building; and in response to receipt of the signal, automatically signaling the at least some actuators to return the at least one protective device to the non-protective position.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p. ex. systèmes télégraphiques d'incendie ou de police
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
E05F 15/71 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible à des variations de température, à la pluie, au vent ou au bruit
34.
Dynamic control of smart home using wearable device
Embodiments of the present invention provide a method and system for dynamically controlling an appliance based on information received from a wearable device, to regulate the user's health. A wearable device is identified and configured to monitor at least one physiological aspect of the user. A controllable appliance with at least one sensor and at least one controllable setting is also identified. Health information of the user is received and utilized in generating, a user profile which comprises parameters related to the health of the user. Data from the wearable device and data from the controllable appliance is analyzed and it is determined whether the data matches the parameters related to the health of the user. If the data does not match the parameters related to the health of the user, then at least one controllable setting of the at least one controllable appliance is adjusted.
F24F 11/02 - Aménagements ou montage des dispositifs de commande ou de sécurité
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
F24F 11/00 - Aménagements de commande ou de sécurité
A system and computer implemented method for detecting a change in a home environment for a visually impaired user is disclosed. The method may include monitoring the home environment using a set of sensors configured to collect environment data for a set of areas of the home environment. The method may also include detecting an environmental change in an area of the home environment. The method may also include providing, in response to a triggering event, a notification of the environmental change.
A system and computer implemented method for detecting a change in a home environment for a visually impaired user is disclosed. The method may include monitoring the home environment using a set of sensors configured to collect environment data for a set of areas of the home environment. The method may also include detecting an environmental change in an area of the home environment. The method may also include providing, in response to a triggering event, a notification of the environmental change.
An automated system for pro-active protection of a building from damage due to weather conditions includes multiple sensors establishing a perimeter about the building, a weather alert receiver, a master controller, storage including multiple automated protocols, and multiple actuators. The master controller will, when a weather alert is received indicating a particular weather condition will be occurring within an area encompassing the perimeter, without any human intervention: automatically execute a specific protocol to thereby cause at least some of the multiple actuators to change at least one protective device from a non-protective to a protective position until a signal is received that the weather alert is no longer in effect, or that the particular weather condition is no longer a potential danger to the building, at which time the master controller will automatically signal the actuators to return to the non-protective position.
E05F 15/71 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible à des variations de température, à la pluie, au vent ou au bruit
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p. ex. systèmes télégraphiques d'incendie ou de police
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
An intelligent thermostat control system for a building, such as a residential home, that automatically adjusts a thermostat setting in the home based on real-time data continually received from mobile devices and/or social media files associated with the residents. This allows the thermostat controller to override the explicit programmed settings with implicit settings based on activity analysis taking the actual locations and schedules of the residents into account. The intelligent thermostat controller may control different zones differently to take into account the schedules and locations of specific residents associated with specific zones. The temperature controller may also adaptively learn a number of parameters based on monitored data, such as travel times and heating/cooling times for the zones based, to determine times for adjusting the thermostats.
F24F 11/00 - Aménagements de commande ou de sécurité
G05B 13/02 - Systèmes de commande adaptatifs, c.-à-d. systèmes se réglant eux-mêmes automatiquement pour obtenir un rendement optimal suivant un critère prédéterminé électriques
G05B 15/02 - Systèmes commandés par un calculateur électriques
H04W 4/02 - Services utilisant des informations de localisation
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G05D 23/19 - Commande de la température caractérisée par l'utilisation de moyens électriques
H04W 4/04 - dans un environnement spécialisé, p.ex. des immeubles ou des véhicules
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
A method comprises obtaining an input comprising audio and visual data for display on a first device, receiving data associated with one or more sensory properties of one or more objects in the input, and reconstructing the one or more sensory properties at the first device based on the data received.
Managing an entryway for a building includes a computer system accessing identity data providing unique biometric identifications and associated names for respective people. Roles are stored and associated with people. Rules are stored and configured to define roles or people and define conditions and actions. A certain rule includes presence of a person at an entryway and a person in at a different location than the entryway as a condition. A named person is identified by the computer system comparing identity data to biometric data received for a person at the entryway. The computer system performs a defined action for the certain rule responsive to determining that the certain rule defines a role associated with the identified, named person at the entryway and responsive to detecting by a sensor in the building that a person is present in the building at a different location than the entryway.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p. ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
E05F 15/73 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible au déplacement ou à la présence de personnes ou d’objets
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
G05B 15/02 - Systèmes commandés par un calculateur électriques
A system and computer implemented method for detecting a change in a home environment for a visually impaired user is disclosed. The method may include monitoring the home environment using a set of sensors configured to collect environment data for a set of areas of the home environment. The method may also include detecting an environmental change in an area of the home environment. The method may also include providing, in response to a triggering event, a notification of the environmental change.
Intelligent lighting is provided to motorists traveling down a stretch of road by sequentially turning on adjacent lighting devices in a lighting segment only when required, such as when vehicles are approaching the lighting devices, and turning off the lighting devices or decreasing a light intensity output of the lighting devices to a predefined minimum lighting intensity output level when no vehicles are present. In addition, which bulb to use in a multi-bulb lighting device is determined, as well as the optimal lighting intensity level of the selected bulb. Further, it is determined which lighting devices in a lighting segment may be turned off or dimmed while maintaining a predefined minimum safe light/brightness level along a pathway associated with the lighting segment.
A method, system and apparatus for operating an energy-using device are disclosed. Current data related to operation of the energy-using device is received at a remote device. An operating specification for the energy-using device is received at the remote device from a database. A recommended setting of the energy-using device is determined from the current data and the operating specification. The remote device communicates the recommended setting to the energy-using device. A control unit at the energy-using device receives the recommended setting and implements the recommended setting at the energy-using device.
A method, system and apparatus for operating an energy-using device are disclosed. Current data related to operation of the energy-using device is received at a remote device. An operating specification for the energy-using device is received at the remote device from a database. A recommended setting of the energy-using device is determined from the current data and the operating specification. The remote device communicates the recommended setting to the energy-using device. A control unit at the energy-using device receives the recommended setting and implements the recommended setting at the energy-using device.
A computer system accesses identity data providing unique biometric identifications and associated names for respective people. Roles are stored and associating ones of the roles are associated with ones of the people. Rules are stored, wherein each rule is configured to define one of the roles or people and define a condition and an action. The computer system receives from a device at an entryway, biometric data for a person. A named person is indicated for the received biometric data by the identity data accessed by the computer system. The computer system selects a rule corresponding to the identified person or to one of the defined roles for the identified person. The computer system performs the defined action for the selected rule when a current condition satisfies the defined condition for the selected rule.
A surveillance video broker arbitrates access by multiple clients to multiple surveillance video sources. Both clients and sources register with the broker. Each source independently specifies respective clients permitted real-time access to its video and conditions of access, if any. Preferably, the video source is a local surveillance domain having one or more cameras, one or more sensors, and a local controller, the source specifying clients or client groups permitted access, and independently specifying conditions of access for each client or client group, where conditions may include scheduled events, non-scheduled events, such as alarms or emergencies, and/or physical proximity. The broker automatically authorizes real-time access according to pre-specified conditions. Preferably, the broker can also arbitrate alert notifications to the clients based on pre-specified notification criteria.
G06F 15/173 - Communication entre processeurs utilisant un réseau d'interconnexion, p. ex. matriciel, de réarrangement, pyramidal, en étoile ou ramifié
H04N 7/16 - Systèmes à secret analogiquesSystèmes à abonnement analogiques
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04L 29/00 - Dispositions, appareils, circuits ou systèmes non couverts par un seul des groupes
H04N 21/25 - Opérations de gestion réalisées par le serveur pour faciliter la distribution de contenu ou administrer des données liées aux utilisateurs finaux ou aux dispositifs clients, p. ex. authentification des utilisateurs finaux ou des dispositifs clients ou apprentissage des préférences des utilisateurs pour recommander des films
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04N 21/218 - Source du contenu audio ou vidéo, p. ex. réseaux de disques locaux
H04N 21/441 - Acquisition de l'identification d'un utilisateur final
Real-time access by a public authority emergency responder to surveillance video of a privately-controlled source is conditionally pre-authorized dependent on the existence of at least one pre-specified emergency condition, and recorded in a data processing system. A public authority emergency responder subsequently requests real-time access to the surveillance video (e.g., during an emergency), and if the pre-specified emergency condition is met, access is automatically granted, i.e., without the need for manual intervention. A pre-specified emergency condition could, e.g., be an alarm condition detected by a sensor at the site of the video surveillance, or a declared state of emergency, properly declared by an appropriate public official.
H04N 5/77 - Circuits d'interface entre un appareil d'enregistrement et un autre appareil entre un appareil d'enregistrement et une caméra de télévision
H04N 5/76 - Enregistrement du signal de télévision
H04N 9/79 - Traitement des signaux de télévision en couleurs en combinaison avec l'enregistrement
H04N 9/82 - Transformation du signal de télévision pour l'enregistrement, p. ex. modulation, changement de fréquenceTransformation inverse pour la reproduction les composantes individuelles des signaux d'image en couleurs n'étant enregistrées que simultanément
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
G08B 19/00 - Alarmes réagissant à plusieurs conditions différentes, indésirables ou anormales, p. ex. cambriolage et incendie, température anormale et débit d'écoulement anormal
H04N 9/80 - Transformation du signal de télévision pour l'enregistrement, p. ex. modulation, changement de fréquenceTransformation inverse pour la reproduction
H04N 5/765 - Circuits d'interface entre un appareil d'enregistrement et un autre appareil
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p. ex. systèmes télégraphiques d'incendie ou de police
H04N 21/00 - Distribution sélective de contenu, p. ex. télévision interactive ou vidéo à la demande [VOD]
50.
Distributed control of a heterogeneous video surveillance network
A surveillance video broker arbitrates access by multiple clients to multiple surveillance video sources. Both clients and sources register with the broker. Each source independently specifies respective clients permitted real-time access to its video and conditions of access, if any. Preferably, the video source is a local surveillance domain having one or more cameras, one or more sensors, and a local controller, the source specifying clients or client groups permitted access, and independently specifying conditions of access for each client or client group, where conditions may include scheduled events, non-scheduled events, such as alarms or emergencies, and/or physical proximity. The broker automatically authorizes real-time access according to pre-specified conditions. Preferably, the broker can also arbitrate alert notifications to the clients based on pre-specified notification criteria.
G06F 15/173 - Communication entre processeurs utilisant un réseau d'interconnexion, p. ex. matriciel, de réarrangement, pyramidal, en étoile ou ramifié
H04N 7/16 - Systèmes à secret analogiquesSystèmes à abonnement analogiques
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04L 29/00 - Dispositions, appareils, circuits ou systèmes non couverts par un seul des groupes
H04N 21/25 - Opérations de gestion réalisées par le serveur pour faciliter la distribution de contenu ou administrer des données liées aux utilisateurs finaux ou aux dispositifs clients, p. ex. authentification des utilisateurs finaux ou des dispositifs clients ou apprentissage des préférences des utilisateurs pour recommander des films
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04N 21/218 - Source du contenu audio ou vidéo, p. ex. réseaux de disques locaux
H04N 21/441 - Acquisition de l'identification d'un utilisateur final
Real-time access by a public authority emergency responder to surveillance video of a privately-controlled source is conditionally pre-authorized dependent on the existence of at least one pre-specified emergency condition, and recorded in a data processing system. A public authority emergency responder subsequently requests real-time access to the surveillance video (e.g., during an emergency), and if the pre-specified emergency condition is met, access is automatically granted, i.e., without the need for manual intervention. A pre-specified emergency condition could, e.g., be an alarm condition detected by a sensor at the site of the video surveillance, or a declared state of emergency, properly declared by an appropriate public official.
H04N 5/77 - Circuits d'interface entre un appareil d'enregistrement et un autre appareil entre un appareil d'enregistrement et une caméra de télévision
H04N 5/76 - Enregistrement du signal de télévision
H04N 9/82 - Transformation du signal de télévision pour l'enregistrement, p. ex. modulation, changement de fréquenceTransformation inverse pour la reproduction les composantes individuelles des signaux d'image en couleurs n'étant enregistrées que simultanément
H04N 9/80 - Transformation du signal de télévision pour l'enregistrement, p. ex. modulation, changement de fréquenceTransformation inverse pour la reproduction
H04N 5/765 - Circuits d'interface entre un appareil d'enregistrement et un autre appareil
H04N 21/00 - Distribution sélective de contenu, p. ex. télévision interactive ou vidéo à la demande [VOD]
52.
Automated authorization to access surveillance video based on pre-specified events
Real-time access by a requestor to surveillance video is conditionally pre-authorized dependent on the existence of at least one pre-specified automatically detectable condition, and recorded in a data processing system. A requestor subsequently requests real-time access to the surveillance video (e.g., as a result of an alarm), and if the pre-specified automatically detectable condition is met, access is automatically granted, i.e., without the need for manual intervention. An automatically detectable condition could, e.g., be an alarm condition detected by a sensor at the site of the video surveillance. Alternatively, it could be a locational proximity of the requestor to the site of the video surveillance. Alternatively, it could be a previously defined time interval.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G06F 21/00 - Dispositions de sécurité pour protéger les calculateurs, leurs composants, les programmes ou les données contre une activité non autorisée
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
53.
Dynamic temperature control for a room containing a group of people
Optimum temperature in a room is controlled by directly and dynamically sensing the body temperatures of one or more people in the room and storing a set of parameters to be correlated with the sensed body temperatures in determining a selected optimum room temperature. The sensed body temperatures are wirelessly transmitted to be correlated with the set of parameters wherein optimum room temperature is determined based on those parameters. In response to this correlation, a selected optimum room temperature may be provided by appropriate heating or cooling.
G05B 13/02 - Systèmes de commande adaptatifs, c.-à-d. systèmes se réglant eux-mêmes automatiquement pour obtenir un rendement optimal suivant un critère prédéterminé électriques
G05D 23/19 - Commande de la température caractérisée par l'utilisation de moyens électriques
F24F 11/00 - Aménagements de commande ou de sécurité
54.
Automated authorization to access surveillance video based on pre-specified events
Real-time access by a requestor to surveillance video is conditionally pre-authorized dependent on the existence of at least one pre-specified automatically detectable condition, and recorded in a data processing system. A requestor subsequently requests real-time access to the surveillance video (e.g., as a result of an alarm), and if the pre-specified automatically detectable condition is met, access is automatically granted, i.e., without the need for manual intervention. An automatically detectable condition could, e.g., be an alarm condition detected by a sensor at the site of the video surveillance. Alternatively, it could be a locational proximity of the requestor to the site of the video surveillance. Alternatively, it could be a previously defined time interval.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G06F 21/00 - Dispositions de sécurité pour protéger les calculateurs, leurs composants, les programmes ou les données contre une activité non autorisée
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courteDéclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04L 29/06 - Commande de la communication; Traitement de la communication caractérisés par un protocole
G06F 21/62 - Protection de l’accès à des données via une plate-forme, p. ex. par clés ou règles de contrôle de l’accès
55.
Monitoring user position to determine a time for providing a specified state at a user premises
An embodiment directed to a method for providing a specified state at a premises to which a user travels. Comprises determining a time of operation needed by a device located at the premises to provide the specified state, after device activation. One or more positions of the user are detected when the user is within a boundary, the boundary being determined in part by the time of operation. Detected user positions are used to determine a time of arrival of the user at the premises. A time to activate the device is computed from the arrival time and time of operation, collectively, wherein activating the device at the computed time causes the specified state to be provided at a time that coincides with arrival of the user at the premises.
Intelligent lighting is provided to motorists traveling down a stretch of road by sequentially turning on adjacent lighting devices in a lighting segment only when required, such as when vehicles are approaching the lighting devices, and turning off the lighting devices or decreasing a light intensity output of the lighting devices to a predefined minimum lighting intensity output level when no vehicles are present. In addition, which bulb to use in a multi-bulb lighting device is determined, as well as the optimal lighting intensity level of the selected bulb. Further, it is determined which lighting devices in a lighting segment may be turned off or dimmed while maintaining a predefined minimum safe light/brightness level along a pathway associated with the lighting segment.
A controller is provided for HVAC equipment. The controller has a processor, memory, and a RF module for a home automation network, and is operable to regulate operation of the HVAC equipment based upon a scheduling program stored in memory. The scheduling program includes at least one usage periods and at least one set point associated with each usage period. The controller is also operable to regulate operation of remote electrical devices over the home automation network; and to create a device scheduling program for the remote electrical devices, the device scheduling program including at least one device period and an operational state associated with each device period.
A method, system or computer usable program product for providing alerts of inefficiency of an environmental conditioning system including, responsive to a cycle initiation by the environmental conditioning system, measuring a difference between an intake temperature and an outlet temperature after a predetermined period of time, and responsive to the difference being below a minimum level, generating an alert.
A method and apparatus are disclosed for improving low-cost MTC (Machine-Type Communication) devices in a wireless communication system. The method includes broadcasting, in a system information, a first information used for cell re-selection. The method further includes providing a second information, for a neighboring cell or a frequency, that is used for cell re-selection.
H04W 4/00 - Services spécialement adaptés aux réseaux de télécommunications sans filLeurs installations
H04W 48/12 - Distribution d'informations relatives aux restrictions d'accès ou aux accès, p. ex. distribution de données d'exploration utilisant un canal de commande descendant
H04W 48/16 - ExplorationTraitement d'informations sur les restrictions d'accès ou les accès
Provided are techniques for providing a home or business security system that relies upon data encryption for both communication and the storage of content. The disclosed technology incorporates all the devices necessary for a comprehensive security system, including, but not limited to, controllers, monitors, alarms and communication media. The system may include an unlimited number of devices and, further, individual devices may be added and removed as needed. Users may define and change the boundaries of a security system or, in other words, decide what devices to include or not include in such a system. A defined boundary does not need to be confined to a single location. In one embodiment, the claimed subject matter incorporates xCP based broadcast encryption technology.
A controller is provided for operating HVAC equipment using an environmental control program. The controller has an environmental sensor operable to provide a measured temperature value to the environmental control program. The controller further runs a dynamic temperature control program that is operable to provide a dynamic correction factor to the environmental control program that dynamically compensates the measured temperature value for waste heat generated by power consumption within the controller.
Embodiments of the invention relate to dynamic power management of storage volumes and disk arrays in a storage subsystem to mitigate loss of performance resulting from the power management. The volumes and arrays are prioritized, and in real-time power is selectively reduced in response to both the prioritization and an energy savings goal. A feedback loop is provided to dynamically measure associated power gain based upon a lowering of power consumption, and device selection may be adjusted based upon received feedback.
A communication control method and system for controlling communication among multiple industrial control systems connected via a network. The communication control system includes: a communication relay apparatus for relaying communication between at least two of multiple industrial control systems; a monitoring section for monitoring the multiple industrial control systems; and a control section for switching, if the monitoring section detects an anomaly from at least one of the multiple industrial control systems, communication between an industrial control system detected with an anomaly and a second industrial control system so that the communication is performed via the communication relay apparatus.
G06F 15/16 - Associations de plusieurs calculateurs numériques comportant chacun au moins une unité arithmétique, une unité programme et un registre, p. ex. pour le traitement simultané de plusieurs programmes
A system and method for presentation of surveillance data includes a first environment including one or more sensors configured to monitor the first environment wherein data is collected by the one or more sensors. A second environment includes one or more information presentation devices configured to convey an event or state occurring in the first environment by altering an ambient sensory condition in the second environment, such that the ambient sensory condition is modified in accordance with a type and/or level of the event or state.
A controller is provided for HVAC equipment. The controller receives a set of internal temperature values, and a set of external temperature values, the set of external temperature values representing at least one non-current temperature. The controller determines a predictive internal temperature value from the set of internal temperature values and a predictive external temperature value from the set of external temperature values. The controller receives an internal humidity value representing humidity within the premise, the controller further controls the HVAC equipment to modify the humidity within the premise when the received internal humidity value is different from a humidity set point; and the humidity set point is regulated by a humidity limit value, the humidity limit value being where condensation forms, the humidity limit value being calculated using the predictive internal temperature value and the predictive external temperature value.
G05D 22/02 - Commande de l'humidité caractérisée par l'utilisation de moyens électriques
F24F 3/14 - Systèmes de conditionnement d'air dans lesquels l'air conditionné primaire est fourni par une ou plusieurs stations centrales aux blocs de distribution situés dans les pièces ou enceintes, blocs dans lesquels il peut subir un traitement secondaireAppareillage spécialement conçu pour de tels systèmes caractérisés par le traitement de l'air autrement que par chauffage et refroidissement par humidificationSystèmes de conditionnement d'air dans lesquels l'air conditionné primaire est fourni par une ou plusieurs stations centrales aux blocs de distribution situés dans les pièces ou enceintes, blocs dans lesquels il peut subir un traitement secondaireAppareillage spécialement conçu pour de tels systèmes caractérisés par le traitement de l'air autrement que par chauffage et refroidissement par déshumidification
F24F 11/00 - Aménagements de commande ou de sécurité
66.
Controlling communication among multiple industrial control systems
A communication control method and system for controlling communication among multiple industrial control systems connected via a network. The communication control system includes: a communication relay apparatus for relaying communication between at least two of multiple industrial control systems; a monitoring section for monitoring the multiple industrial control systems; and a control section for switching, if the monitoring section detects an anomaly from at least one of the multiple industrial control systems, communication between an industrial control system detected with an anomaly and a second industrial control system so that the communication is performed via the communication relay apparatus.
Embodiments of the present invention provide an approach for controlling and minimizing electrical power consumption of a plurality of lights and electronic devices connected to a networked computing environment, wherein asset and space management software can be utilized to monitor and remotely turn off the electronic devices that are determined as not being utilized, based on observed indicators of inactivity associated with the electronic devices. Specifically, the location of the electronic devices are determined and then registered and stored in a database, wherein the electronic devices include desktop computers, laptops, phones, and heating ventilation and air conditioning (HVAC) systems that are connected to the networked computing environment.
One or more embodiments manage emergency response services. An emergency event is determined to have occurred. A set of civilian responders currently available to respond to the emergency event is selected from a plurality of civilian responders in response to determining that the emergency event has occurred. Each civilian responder in the set of civilian responders is associated with at least one wireless communication device. The set of civilian responders is notified that the emergency event has occurred. A set of emergency event information associated with the emergency event is transmitted to at least one wireless communication device associated with each civilian responder in the set of civilian responders.
A method, computer program product, and apparatus for monitoring patterns of motion are provided. A signal is received from a sensor on a user, wherein movement of the user causes the sensor to generate power to emit a signal indicative of the movement of the user. The signal is analyzed to form a current pattern of motion. The current pattern of motion is compared to a baseline pattern of motion associated with the user. A difference between the current pattern of motion and the baseline pattern of motion associated with the user is determined to form a difference. The difference is compared to a predetermined threshold. Responsive to the difference exceeding the predetermined threshold, an alert is sent.
Embodiments of the present invention address deficiencies of the art in respect to personal articles tracking and provide a method, system and computer program product for group aware tracking within a bounded zone. In an embodiment of the invention, a group aware tracking method can include recording an association in a table in a computing system between individuals within a geographically bounded zone and at least one target object within the geographically bounded zone. The method also can include sensing an individual from amongst the individuals exiting the geographically bounded zone and further sensing a target object exiting the geographically bounded zone. The method yet further can include comparing the sensed individual with the further sensed target object to determine whether or not an association exists in the table and triggering an alarm when an association is determined not to exist in the table between the sensed individual and the further sensed target object.
Video analysis capabilities can be integrated into an emergency response system and/or a video operations center (VOC) monitoring for emergency incidents. At least one computer program driven response action involving detecting patterns in video streams that comprise video of an incident can be performed. This response action can be directed to VOC personnel and/or to emergency response system personnel. Further, the response action can result in an automated responses to an emergency incident and/or to an alerting of humans monitoring video to focus on a particular video stream/incident. One such response action, which increases video capture activity at a geographic location of the incident, can occur responsive to a receipt of an emergency call by the emergency response system. Another response action can analyze at least one video stream of the geographic location and can automatically dispatch (in approximately real time) an emergency responder to the geographic location. Still another action can analyze the video stream of a geographic location, can determine a high likelihood of an emergency incident, and can provide an alert in a user interface of the emergency response system or a VOC. Video of the incident can also be provided in the user interface.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c.-à-d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
73.
Assistance in performing action responsive to detected event
Assistance in performing an action for a detected event for a monitoring target resource whose connection is not an always-on connection to perform an appropriate action as soon as possible in response to occurrence of a failure. The assistance device stores, in association with an occurrence pattern of an event, information related to plural tasks for determining whether a predetermined condition is fulfilled, and an action to be performed by a corresponding device. Then, the assistance device calculates an index value for determining the level of probability of the occurrence pattern of the event, determines whether the calculated index value is larger than a predetermined value, and sends, to a device to perform the action, the occurrence pattern of the event the index value of which is determined to be larger than the predetermined value, and information related to the plural tasks and the action corresponding to the occurrence pattern.
G06F 9/46 - Dispositions pour la multiprogrammation
G06F 3/00 - Dispositions d'entrée pour le transfert de données destinées à être traitées sous une forme maniable par le calculateurDispositions de sortie pour le transfert de données de l'unité de traitement à l'unité de sortie, p. ex. dispositions d'interface
G06F 9/44 - Dispositions pour exécuter des programmes spécifiques
G06F 13/00 - Interconnexion ou transfert d'information ou d'autres signaux entre mémoires, dispositifs d'entrée/sortie ou unités de traitement
Data pertaining to environmental information is acquired using sensors on a multiplicity of networked pervasive devices, and analyzed to determine occurrence of at least one environmental event. Such data can be obtained, for example, from an inventive wireless communications device including an antenna, transmit circuitry coupled to the antenna for transmission of radio frequency radiation therefrom, at least one environmental sensor configured to obtain environmental data, and a communications module coupled to the at least one environmental sensor and configured to cause transmission of a representation of the data via the antenna and the transmit circuitry.
G01V 3/00 - Prospection ou détection électrique ou magnétiqueMesure des caractéristiques du champ magnétique de la terre, p. ex. de la déclinaison ou de la déviation
G08B 1/08 - Systèmes de signalisation caractérisés seulement par la forme de transmission du signal utilisant une transmission électrique
75.
System and method to route airflow using dynamically changing ducts
The invention generally relates to ventilation systems and methods, and more particularly to selectively configurable climate control systems and methods for use in data centers and the like. A method includes receiving or obtaining input data, generating at least one actuation signal to change a flow configuration of a re-configurable duct system based upon the input data, and transmitting the at least one actuation signal.
G05B 13/00 - Systèmes de commande adaptatifs, c.-à-d. systèmes se réglant eux-mêmes automatiquement pour obtenir un rendement optimal suivant un critère prédéterminé
F24F 7/10 - Ventilation avec réseau de gaines à circulation d'air forcée, p. ex. par un ventilateur avec amenée ou évacuation de l'air au travers de parois, planchers ou plafonds perforés
F24F 11/00 - Aménagements de commande ou de sécurité
H05K 7/20 - Modifications en vue de faciliter la réfrigération, l'aération ou le chauffage
76.
Method and system for spatio-temporal event detection using composite definitions for camera systems
A system and method for monitoring events includes defining alert events based on primitive event types in an environment monitored by monitoring devices. Alert parameters are set for each alert event, and alert events are combined to create a composite alert event based on a plurality of alert events. A plurality of engines is monitored to determine if multiple events comprising the composite alert event have occurred.
Data pertaining to environmental information is acquired using sensors on a multiplicity of networked pervasive devices, and analyzed to determine occurrence of at least one environmental event. Such data can be obtained, for example, from an inventive wireless communications device including an antenna, transmit circuitry coupled to the antenna for transmission of radio frequency radiation therefrom, at least one environmental sensor configured to obtain environmental data, and a communications module coupled to the at least one environmental sensor and configured to cause transmission of a representation of the data via the antenna and the transmit circuitry.
G01V 3/00 - Prospection ou détection électrique ou magnétiqueMesure des caractéristiques du champ magnétique de la terre, p. ex. de la déclinaison ou de la déviation
A system and method for presentation of surveillance data includes a first environment including one or more sensors configured to monitor the first environment wherein data is collected by the one or more sensors. A second environment includes one or more information presentation devices configured to convey an event or state occurring in the first environment by altering an ambient sensory condition in the second environment, such that the ambient sensory condition is modified in accordance with a type and/or level of the event or state.
An apparatus and method is disclosed for efficiently sensing and tracking objects in an indoor environment by simultaneously measuring the object movement with an inertial navigation system and a reference location positioning system. By combining the measurements obtained with accelerometers, gyroscopes, angle estimators and the reference system using an extended Kalman filter based approach, a position estimate is obtained with high reliability and precision accuracy. Improvement in performance is obtained by the incorporation of dynamic mode switching and forward-backward smoothing in the location position estimator.
A method for monitoring events includes defining alert events based on primitive event types in an environment monitored by monitoring devices. Alert parameters are set for each alert event, and alert events are combined to create a composite alert event based on a plurality of alert events. A plurality of engines is monitored to determine if multiple events comprising the composite alert event have occurred.
Provided is a method for providing a home or business security system that relies upon data encryption for both communication and the storage of content. The disclosed technology incorporates all the devices necessary for a comprehensive security system, including, but not limited to, controllers, monitors, alarms and communication media. The system may include an unlimited number of devices and, further, individual devices may be added and removed as needed. Users may define and change the boundaries of a security system or, in other words, decide what devices to include or not include in such a system. A defined boundary does not need to be confined to a single location. In one embodiment, the claimed subject matter incorporates xCP based broadcast encryption technology.
A method and apparatus for remote access to a target application is disclosed where a system administrator may establish telephonic contact with an interactive voice response system and obtain access to the target application by speech communication. The interactive response system may authenticate the system administrator by implementing various measures including biometric measures. Once access is granted, the interactive response system may broker a communication between the target application using text/data and the system administrator using natural language.
G10L 11/00 - Détermination ou détection des caractéristiques de la parole ou des signaux audio qui ne se limitent pas à un seul des groupes ; G10L 15/00-G10L 21/00
brevets
