Abrégé

A system and method for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer and a sink float tank occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation
• B02C 23/38 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide dans des appareils comportant plusieurs zones de broyage ou de désagrégation
• B02C 23/40 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide avec plusieurs moyens pour ajouter le fluide au matériau en cours de broyage ou de désagrégation
• C08J 11/04 - Récupération ou traitement des résidus des polymères
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/26 - Résidus

Abrégé

A system for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The system includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a hot water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried in a dryer and compacted in a compactor without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 23/38 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide dans des appareils comportant plusieurs zones de broyage ou de désagrégation
• B02C 23/18 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29B 17/04 - Désintégration des matières plastiques
• B02C 21/00 - Installations de désagrégation avec ou sans séchage des matériaux
• B29B 9/08 - Fabrication de granulés par agglomération de particules plus petites
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B29K 105/26 - Résidus

Abrégé

A system and method for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer and a sink float tank occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation
• B02C 23/38 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide dans des appareils comportant plusieurs zones de broyage ou de désagrégation
• B02C 23/40 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide avec plusieurs moyens pour ajouter le fluide au matériau en cours de broyage ou de désagrégation
• C08J 11/04 - Récupération ou traitement des résidus des polymères
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/26 - Résidus

Abrégé

A system and method for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer and a sink float tank occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B02C 23/38 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide dans des appareils comportant plusieurs zones de broyage ou de désagrégation
• B02C 23/40 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide avec plusieurs moyens pour ajouter le fluide au matériau en cours de broyage ou de désagrégation
• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/26 - Résidus

Abrégé

A system for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The system includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a hot water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried in a dryer and compacted in a compactor without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 21/00 - Installations de désagrégation avec ou sans séchage des matériaux
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29B 17/04 - Désintégration des matières plastiques
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B29K 105/26 - Résidus

Abrégé

A method and system for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer and a sink float tank occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29B 17/04 - Désintégration des matières plastiques
• C08J 11/00 - Récupération ou traitement des résidus
• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation

Abrégé

A system for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The system includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a hot water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried in a dryer and compacted in a compactor without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 21/00 - Installations de désagrégation avec ou sans séchage des matériaux
• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29B 17/02 - Séparation de matières plastiques des autres matières

Abrégé

A method for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a hot water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried in a dryer and compacted in a compactor without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 21/00 - Installations de désagrégation avec ou sans séchage des matériaux
• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29B 17/02 - Séparation de matières plastiques des autres matières

Abrégé

A system and method for processing a supply of post-consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer and a sink float tank occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 23/40 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide avec plusieurs moyens pour ajouter le fluide au matériau en cours de broyage ou de désagrégation
• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation
• B02C 23/38 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide dans des appareils comportant plusieurs zones de broyage ou de désagrégation
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles

Abrégé

A system for processing a supply of post consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The system includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried in a dryer and compacted in a compactor without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 19/00 - Autres dispositifs ou procédés de désagrégation

Abrégé

A method for processing a supply of post consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 19/00 - Autres dispositifs ou procédés de désagrégation
• B02C 23/40 - Addition de fluide, dans un but autre que celui de broyer ou de désagréger par l'énergie du fluide avec plusieurs moyens pour ajouter le fluide au matériau en cours de broyage ou de désagrégation
• B02C 23/08 - Séparation ou triage de matériaux, associé au broyage ou à la désagrégation
• B29B 17/04 - Désintégration des matières plastiques
• B29B 17/00 - Récupération de matières plastiques ou d'autres constituants des déchets contenant des matières plastiques
• B29B 17/02 - Séparation de matières plastiques des autres matières
• B29K 105/06 - Présentation, forme ou état de la matière moulée contenant des agents de renforcement, charges ou inserts
• B29K 23/00 - Utilisation de polyalcènes comme matière de moulage
• B29L 7/00 - Objets plats, p. ex. pellicules ou feuilles

Abrégé

A method for processing a supply of post consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B02C 19/00 - Autres dispositifs ou procédés de désagrégation

Produits et services

Polyethylene bags made in part with recycled materials for use as box liners for cardboard packaging boxes and trash can liners for household [ Polyethylene films made in part with recycled materials for use as furniture covers, pallet covers, as dust covers as construction film and for form fill and seal applications ] Recycling program to encourage the recycling of polyethylene films and bags

Produits et services

Polyethylene bags made in part with recycled materials for use as box liners, industrial parts bags, and can liners Polyethylene films made in part with recycled materials for use as furniture covers, pallet covers, as dust covers, converted into bags, as construction film and for form fill and seal applications

Abrégé

A method for processing a supply of post consumer scrap linear low density or low density polyethylene film into near-virgin quality blown film product. The method includes tearing the supply of film in a shredder, wherein the surface area of the film is exposed, including delaminating the film. The torn supply of film is washed in a water bath including a surfactant. The film is agitated in the bath containing the surfactant wherein contaminants on the film are removed from the film. The washed film is ground into smaller pieces and additional washing of the ground film in a rotating friction washer occurs wherein additional contaminants are removed from the film. The ground film is then dried and compacted without addition of water into granulated objects of near-virgin quality blown film product.

Classes IPC  ?

• B29B 17/04 - Désintégration des matières plastiques