Unilin, BVBA

Belgique

Retour au propriétaire

1-80 de 80 pour Unilin, BVBA Trier par
Recheche Texte
Affiner par
Type PI
        Brevet 60
        Marque 20
Juridiction
        International 58
        Canada 21
        États-Unis 1
Date
2024 3
2023 1
2022 1
2021 2
2020 4
Voir plus
Classe IPC
B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs 26
E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés 9
B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet 8
A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique 7
B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules 6
Voir plus
Classe NICE
19 - Matériaux de construction non métalliques 18
27 - Revêtements de sols et de murs 15
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler 6
20 - Meubles et produits décoratifs 5
16 - Papier, carton et produits en ces matières 3
Voir plus
Statut
En Instance 5
Enregistré / En vigueur 75

1.

Unilin Master Oak

      
Numéro d'application 236974100
Statut En instance
Date de dépôt 2024-11-20
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building panels, not of metal; panels, not of metal, for floor, wall and ceiling coverings; planks of non-metallic materials for use in construction; partitions, not of metal; wall linings, not of metal, for building; wall panelling made of non-metallic materials; non-metallic revetment for building. (2) Wallcovering, not included in other classes; vinyl wall coverings.

2.

LUCENT

      
Numéro d'application 234030200
Statut En instance
Date de dépôt 2024-05-17
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 20 - Meubles et produits décoratifs

Produits et services

(1) Building materials, not of metal; floors, not of metal; tile floorings, not of metal; parquet flooring; laminated parquet flooring; laminated parquet floorboards; parquet floor boards; wood veneer parquet flooring; flooring underlays (non-metallic); vinyl flooring; vinyl floor coverings for forming a floor; building panels, not of metal; panelling, not of metal, for floors, walls and ceilings; planks of non-metallic materials for use in construction; partitions, not of metal; wall linings, not of metal, for building; wall panelling made of non-metallic materials; building sheets (non-metallic); staircases, stair treads (steps) and stringers (parts of staircases), not of metal; wooden profiles; skirting boards (non-metallic); moldings, not of metal, for cornices and staircases; non-metallic flooring, composed from recovered wood; boards (non-metallic) for building purposes; laminated boards (non-metallic) for building use. (2) Furniture; countertops.

3.

LUMIC

      
Numéro d'application 234030100
Statut En instance
Date de dépôt 2024-05-17
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not of metal; floors, not of metal; tile floorings, not of metal; parquet flooring; laminated parquet flooring; laminated parquet floorboards; parquet floor boards; wood veneer parquet flooring; flooring underlays (non-metallic); vinyl flooring; vinyl floor coverings for forming a floor; building panels, not of metal; panelling, not of metal, for floors, walls and ceilings; planks of non-metallic materials for use in construction; partitions, not of metal; wall linings, not of metal, for building; wall panelling made of non-metallic materials; building sheets (non-metallic); staircases, stair treads (steps) and stringers (parts of staircases), not of metal; wooden profiles; skirting boards (non-metallic); moldings, not of metal, for cornices and staircases; non-metallic flooring, composed from recovered wood; boards (non-metallic) for building purposes; laminated boards (non-metallic) for building use. (2) Floor coverings; carpets, rugs and mats; linoleum; vinyl floor coverings; vinyl floor coverings for existing floors; carpet underlay; wall coverings; vinyl wall coverings.

4.

PROCESS FOR THE PRODUCTION OF WOOD FIBERBOARD

      
Numéro de document 03226768
Statut En instance
Date de dépôt 2022-08-29
Date de disponibilité au public 2023-03-09
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Coudenys, Geert
  • Hoflack, Veronique
  • Vangheluwe, Lieven

Abrégé

The process for the production of wood fiberboard comprises the step in which refined material from recycled wood fiberboards is wetted, heated and pressurized using steam; the step in which this material is kept under pressure and temperature for a certain amount of time, followed by the step of reducing the pressure of this material by at least 3 bar. After this pressure reduction, the material is transformed into recycled wood fibers, possibly with a fraction of wood fiber clumps and any other impurities. The recycled wood fibers are supplied as feedstock in a production line for producing wood fiberboard.

Classes IPC  ?

  • B09B 3/45 - Traitement à la vapeur, p. ex. gazéification ou oxydation de l'eau supercritique
  • B27N 3/18 - Opérations auxiliaires, p. ex. préchauffage, humidification, coupe
  • D21B 1/02 - Traitement préalable des matières premières par des moyens chimiques ou physiques
  • D21B 1/36 - Désintégration explosive par réduction soudaine de la pression

5.

PERGO

      
Numéro d'application 217187800
Statut Enregistrée
Date de dépôt 2022-02-23
Date d'enregistrement 2024-02-26
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Wooden floors; parquet flooring; laminate flooring (not of metal). (2) Vinyl floor coverings.

6.

UNICOAT

      
Numéro d'application 215120200
Statut Enregistrée
Date de dépôt 2021-10-13
Date d'enregistrement 2024-06-21
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not of metal, namely, floor and wall tiles of wood, parquet flooring, laminate flooring, and interlocking planks of wood; floors, not of metal, namely hardwood flooring, and vinyl flooring; tile floorings, not of metal, namely floor tiles of wood, floor tiles of vinyl, glue-laminated wood tiles; parquet flooring; laminated parquet flooring; laminated parquet floorboards; parquet floor boards; wood veneer parquet flooring; flooring underlays, namely, wood floor underlayment, flooring underlayments; building panels, not of metal, namely wood panels for covering floors, walls and ceilings; panels, not of metal, for cladding floors, walls and ceilings; planks of non-metallic materials for use in construction; partitions, not of metal, namely wooden partitions for building, vinyl partitions; wall linings, not of metal, for building, namely hardwood, laminate and vinyl wall linings; wall panelling made of non-metallic materials; stairs, wood and vinyl stair treads (steps) and wood and vinyl stringers (parts of staircases), not of metal; timber mouldings; skirting boards (non-metallic -), namely, floor boards of wood and vinyl; expansion joint covers (non-metallic - ); profiles, not of metal, for cornices and stairs. (2) Floor coverings, namely carpet tiles for covering floors, linoleum for use on floors, vinyl floor coverings, anti-slip floor coverings for use on staircases, decorative slip-resistant floor coverings in sheet form; carpets, rugs and floor mats; linoleum floor coverings; vinyl floor coverings; carpet underlay; vinyl wall coverings.

7.

PROCESS FOR THE PRODUCTION OF PARTICLE BOARD OR WOOD FIBER BOARD

      
Numéro de document 03166821
Statut En instance
Date de dépôt 2021-03-01
Date de disponibilité au public 2021-09-10
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Allaert, Laurens
  • Coudenys, Geert
  • Hoflack, Veronique
  • Goeminne, Jan
  • Nel, Koen

Abrégé

The process for the production of particle board, MDF board or HDF board comprises the step of recycling particle board material, MDF and/or HDF board material in which recycled chips and/or recycled wood fibers are produced. The process comprises the step in which the particle board material, the MDF and/or HDF board material is wetted, heated and pressurized, wherein this material is kept under pressure and at an elevated temperature for a certain time. The process comprises the step of supplying the recycled chips and/or the recycled wood fibers as base material in a production process of particle board, MDF board or HDF board.

Classes IPC  ?

  • B09B 3/00 - Destruction de déchets solides ou transformation de déchets solides en quelque chose d'utile ou d'inoffensif
  • B27N 3/00 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres
  • D21B 1/02 - Traitement préalable des matières premières par des moyens chimiques ou physiques
  • D21B 1/36 - Désintégration explosive par réduction soudaine de la pression
  • D21C 5/00 - Autres procédés pour obtenir de la cellulose, p. ex. cuisson des linters de coton
  • D21J 1/00 - Panneaux de fibres
  • E04C 2/10 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en bois, fibres, copeaux, tiges de végétaux ou analoguesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en matières plastiquesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en produits mousse

8.

PANEL AND METHOD FOR MANUFACTURING THE PANEL

      
Numéro d'application IB2019060901
Numéro de publication 2020/141384
Statut Délivré - en vigueur
Date de dépôt 2019-12-17
Date de publication 2020-07-09
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Nel, Koen

Abrégé

Method for producing a panel, more specifically a load-bearing panel, and even more specifically a mezzanine floor panel, wherein said panel comprises a wood-based substrate and said panel, on at least one side thereof, in the case of a floor panel preferably the underside thereof, is provided with an aluminum layer, characterized in that in production, the aluminum layer and the substrate are bonded to each other by pressing with the intermediary of a bonding layer, using a flat press. The invention further also relates to load-bearing panels, in particular mezzanine panels, wherein an aluminum layer is bonded to a substrate by means of a polyurethane-based or resin-based bonding layer.

Classes IPC  ?

  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 15/10 - Produits stratifiés composés essentiellement de métal comprenant un métal comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique de bois
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 15/20 - Produits stratifiés composés essentiellement de métal comportant de l'aluminium ou du cuivre
  • B32B 3/26 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes
  • B32B 15/085 - Produits stratifiés composés essentiellement de métal comprenant un métal comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétique comprenant des polyoléfines
  • B32B 15/095 - Produits stratifiés composés essentiellement de métal comprenant un métal comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétique comprenant des polyuréthanes
  • B32B 21/08 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétiqueProduits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine renforcée de fibres
  • B32B 27/32 - Produits stratifiés composés essentiellement de résine synthétique comprenant des polyoléfines
  • B32B 27/40 - Produits stratifiés composés essentiellement de résine synthétique comprenant des polyuréthanes
  • B32B 37/00 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons
  • B32B 37/04 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par la fusion partielle d'au moins une couche
  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
  • E04F 15/04 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en bois, p. ex. avec organes de jointement en bois
  • E04F 15/06 - Revêtements de sol composés d'un certain nombre d'éléments semblables en métal, combiné ou non avec un autre matériau
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs
  • B32B 37/24 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui ne présente pas de cohésion avant la stratification, p. ex. constituée de matériau granulaire projeté sur un substrat

9.

DECOR PAPER OR FOIL

      
Numéro d'application IB2019059877
Numéro de publication 2020/104912
Statut Délivré - en vigueur
Date de dépôt 2019-11-18
Date de publication 2020-05-28
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Decor paper or foil for application to panel shaped substrates, wherein said decor paper (1) or foil comprises a base layer (3), an inkjet receiving surface (4), and a digitally printed pattern (5) obtained via printing with a single-pass printer and including a matrix (8) of a plurality, preferably at least 200, printed ink dots (9) per inch, characterized in that said matrix (8), as seen in the width direction (W) of the paper or foil, is generally uniformly made up with uniformly sized printed ink dots (9), with the exception of a minority of the area of the printed pattern (5) wherein said matrix (8) is modified.

Classes IPC  ?

  • B41M 3/12 - Images-transfert ou similaires, p. ex. décalcomanies
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B42D 15/00 - Cartes ou imprimés d'un format ou d'un type particulier non prévu ailleurs

10.

COVERED PANEL AND METHOD FOR MANUFACTURING COVERED PANELS

      
Numéro d'application IB2019059486
Numéro de publication 2020/095196
Statut Délivré - en vigueur
Date de dépôt 2019-11-05
Date de publication 2020-05-14
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Clement, Benjamin
  • Ledegen, Sam

Abrégé

Coated panel with at least a substrate (2) and a top layer applied thereto (3), wherein the above-mentioned top layer (3) comprises at least a decor layer (4) and a translucent or transparent wear layer (5), characterized in that the above-mentioned wear layer (5) comprises a thermally cured acrylate resin or a thermally cured unsaturated polyester resin. Preferably, wherein thermal curing partially or completely cures the resin. In particular, wherein the above-mentioned acrylate resin or unsaturated polyester resin is at least partially cured by means of a thermally initiated radical crosslinking reaction. The invention further relates to a method for the production of such coated panels (1), in particular floor panels.

Classes IPC  ?

  • B27M 3/04 - Fabrication ou remise en état d'articles particuliers semi-finis ou finis d'éléments de plancher, p. ex. lames de parquet
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 37/06 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par le procédé de chauffage
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs
  • B05D 3/06 - Traitement préalable des surfaces sur lesquelles des liquides ou d'autres matériaux fluides doivent être appliquésTraitement ultérieur des revêtements appliqués, p. ex. traitement intermédiaire d'un revêtement déjà appliqué, pour préparer les applications ultérieures de liquides ou d'autres matériaux fluides par exposition à des rayonnements

11.

UNIDROP

      
Numéro d'application 203473900
Statut Enregistrée
Date de dépôt 2020-03-10
Date d'enregistrement 2021-10-20
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not of metal, namely floor and wall tiles of wood, parquet flooring, laminate flooring, interlocking planks of wood and fiber board for building, buildings, transportable, not of metal, namely transportable wood, plastic, wood-plastic composite, glue-laminated wood, fiber board, and vinyl gazebos for household use, greenhouses for household use, modular greenhouses, pre-fabricated greenhouses, and garden sheds, parquet flooring, floors, not of metal, namely hardwood flooring, and vinyl flooring, tile floorings, not of metal, namely floor tiles of wood, floor tiles of vinyl, glue-laminated wood tiles, panels and sheets, made of wood and plastic, for covering floors, walls and ceilings, parquet floors, boards, planks, tiles and panels for floors, walls and ceilings, non-metallic floor panels and floor boards, namely wood panels, plastic floor panels, floor multilayer panels of plastic for use in building, parquet floor boards, floor boards of wood, plywood board, particle boards, hardwood boards, vinyl panels and boards, glue-laminated wood panels and boards, building panels, not of metal, namely concrete panels, wood panels, and glue-laminated wood panels, wall linings, not of metal, for building, namely ceramic tiles for flooring and lining, wall paneling made of non-metallic materials, non-metallic building materials with insulation properties, namely tuff, terra cotta, logs, concrete poles, wood, plastic, plywood, vinyl, glue-laminated wood, felt, and agglomerated cork for use as building materials, insulated glass, sound-absorbing building materials, not of metal tuff, terra cotta, logs, concrete poles, wood, plastic, plywood, vinyl, glue-laminated wood, felt, agglomerated cork, and insulated glass for use as building materials, non-metallic building materials for sound absorption and antidrumming, namely bitumen paper for building, and asphalt felt for building purposes, roofing, not of metal, namely asphalt roofing paper, roofing slates, wood roofing shingles, roofing shingles, roofing cements, roof coatings, bituminous coatings for roofing, asphalt-based roofing mastics, pvc roofing membrane, roofing boards of wood, plastic roofing panels, roofing paper, roofing felt, textiles for roofing, and roofing tiles, paving slabs, not of metal, non-metallic building materials for vibration absorption and attenuation, namely plastic reinforced wall panels for use as sound and light barriers, non-metal tiles, namely ceramic tiles, earthenware tiles, floor tiles of wood, cement paving tiles, stone paving tiles, terra-cotta floor tiles, non-metallic paving tiles, fireproof tiles, marble tile flooring, glass tiles, floor tiles of vinyl, and glue-laminated wood tiles, staircases, stair treads (steps) and stringers (parts of staircases), not of metal, excepted bricks and other goods made from bricks, or in connection with bricks (2) Carpets, floor mats, mats (excluding sports and gymnastics mats), linoleum; other floor coverings namely carpet tiles for covering floors, linoleum for use on floors, vinyl floor coverings, anti-slip floor coverings for use on staircases, decorative slip-resistant floor coverings in sheet form; non-textile wallpaper; wall hangings, not of textile; vinyl floor coverings; carpet underlay; floor rugs.

12.

METHOD FOR COMPOSING A SET OF FLOOR PANELS

      
Numéro d'application IB2019054338
Numéro de publication 2019/229609
Statut Délivré - en vigueur
Date de dépôt 2019-05-24
Date de publication 2019-12-05
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Lozie, Klaus

Abrégé

A method for composing a set of floor panels for flooring a room, based on a data set (50) in accordance at least with the ground surface area of said room (3), wherein the method contains the step of establishing a laying plan (40) suitable for said room (3), characterized in that the step of establishing a laying plan (40) is carried out by means of a computer, wherein the computer proposes a laying plan (40) on the basis of said data set (50), taking into account desired limitations, wherein said limitations are used to restrict a database (57) of possible solutions.

Classes IPC  ?

  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables

13.

WRAPPING FOIL, METHOD OF MANUFACTURE THEREOF AND FINISHING PROFILE

      
Numéro d'application IB2019054008
Numéro de publication 2019/220354
Statut Délivré - en vigueur
Date de dépôt 2019-05-15
Date de publication 2019-11-21
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • De Cock, Hans
  • Wilmots, Pieter

Abrégé

Wrapping foil with - a transparent paper sheet with a paper weight from 15 to 30 g/m2that is highly varnished; - a printed paper sheet with a paper weight from 50 to 90 g/m2 that is not or is barely varnished; - a carrier sheet with a paper weight less than or equal to the paper weight of the aforementioned printed paper sheet, wherein this carrier sheet is not or is barely varnished. The invention further relates to a method of manufacturing said wrapping foil, as well as to a finishing profile for a covering that is coated with said foil.

Classes IPC  ?

  • B32B 29/00 - Produits stratifiés composés essentiellement de papier ou de carton
  • E04F 19/06 - BorduresBandes de finition, p. ex. baguettesCorniches pour l'éclairage spécialement conçus pour maintenir des panneaux

14.

UNIZIP

      
Numéro d'application 199938200
Statut Enregistrée
Date de dépôt 2019-09-25
Date d'enregistrement 2021-12-29
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not of metal, namely floor and wall tiles of wood, parquet flooring, laminate flooring; parquet flooring; floors, not of metal, namely hardwood flooring, and vinyl flooring; tile flooring, not of metal, namely floor tiles of wood, floor tiles of vinyl, glue-laminated wood flooring tiles; panels and sheets made of wood and plastic, for covering floors; parquet floors, boards and tiles, all the aforementioned being finished and/or aesthetic goods made of wood, plastic, composite or wood or fiber containing materials, and also of laminate. (2) Non-textile wall hangings; vinyl floor coverings; rugs (floor -); floor covering for stairs, namely carpets, rugs and vinyl floor coverings

15.

METHODS FOR MANUFACTURING DECORATIVE PANELS AND PANELS OBTAINABLE THEREBY

      
Numéro d'application IB2019052063
Numéro de publication 2019/175817
Statut Délivré - en vigueur
Date de dépôt 2019-03-14
Date de publication 2019-09-19
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Meersseman, Laurent
  • Clement, Benjamin

Abrégé

Method for manufacturing decorative panels, wherein the panel comprises a panel substrate material (1) and a top decorative layer (9), wherein the method comprises the step of applying said top decorative layer (9) to said panel substrate material (1) at least through additive manufacturing techniques (10), more particularly through material jetting. The invention further concerns panels (8) obtained or obtainable through such method.

Classes IPC  ?

  • B44C 3/02 - Superposition de couches
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

16.

FLOOR PANEL AND METHODS FOR MANUFACTURING FLOOR PANELS

      
Numéro d'application IB2018060452
Numéro de publication 2019/135141
Statut Délivré - en vigueur
Date de dépôt 2018-12-20
Date de publication 2019-07-11
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Naeyaert, Christophe
  • Sabbe, Pieter-Jan

Abrégé

Floor panel with a substrate (8) and a provided thereon decorative layer (6) of wood veneer (7) with a thickness (T1) of 1 millimeter or less, wherein said decorative layer (6) is provided on the substrate (8) by means of a glue layer which is situated between the substrate (8) and the decorative layer (6), characterized in that said glue layer comprises hard particles (27) with an average particle size which is at least one third of the thickness (T1) of the wood veneer (7). The invention also relates to methods for manufacturing such floor panels (1).

Classes IPC  ?

  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 21/04 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 21/06 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de papier ou de carton
  • B32B 21/14 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant une planche de bois ou une feuille de bois de placage
  • B32B 29/00 - Produits stratifiés composés essentiellement de papier ou de carton
  • B32B 3/06 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour lier les couches ensembleCaractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour attacher le produit à quelque chose d'autre p. ex. à un support
  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés

17.

METHODS FOR MANUFACTURING PANELS

      
Numéro d'application IB2018060437
Numéro de publication 2019/135140
Statut Délivré - en vigueur
Date de dépôt 2018-12-20
Date de publication 2019-07-11
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Vermeulen, Bruno

Abrégé

Method for manufacturing panels, with a substrate (2) and a decorative top layer (3), which comprises a printed motif and a transparent or translucent protective layer (9) formed there above, wherein the method comprises at least the following steps: the step (S3) of applying a first and second finishing layer (6) for forming a first and second portion of the aforementioned protective layer (9); the step (S7-S8) of forming recesses (16) at the surface (17) of the aforementioned second finishing layer (7), characterized in that the aforementioned first finishing layer (6) comprises hard particles (13).

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

18.

VARIOUS METHODS FOR MANUFACTURING STRUCTURED PRESS ELEMENTS

      
Numéro d'application IB2018057457
Numéro de publication 2019/064197
Statut Délivré - en vigueur
Date de dépôt 2018-09-26
Date de publication 2019-04-04
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Segaert, Martin
  • Maesen, Christophe
  • Brouckaert, Dries

Abrégé

Method for manufacturing structured press elements. Method for manufacturing structured press elements, wherein the method comprises at least the following steps: • - the step of providing an element of metal; • - the step of providing a mask on a surface of the element for shielding portions of said surface; • - the step of treating non-shielded portions of said surface of the element; • - the step of removing said mask; characterized in that the method comprises at least a step in which said surface of the element is subjected to an ultrasonic treatment and/or that the step of providing the mask comprises at least a treatment with infrared radiation and/or that a step of chemically treating is performed with said surface directed downward.

Classes IPC  ?

  • B44B 5/02 - MatricesAccessoires
  • B44C 1/24 - Pressage ou estampage de dessins ornementaux sur des surfaces
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

19.

BOARD AND METHOD FOR MANUFACTURING A BOARD.

      
Numéro d'application IB2018057461
Numéro de publication 2019/064201
Statut Délivré - en vigueur
Date de dépôt 2018-09-26
Date de publication 2019-04-04
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Board, characterized in that it consists at least of a substrate which is formed at least of a gypsum-based and/or cement-based basic material layer, which board is provided with a chamfer which extends through the basic material layer.

Classes IPC  ?

  • B32B 13/04 - Produits stratifiés composés essentiellement d'une substance à prise hydraulique, p. ex. du béton, du plâtre, du ciment, ou d'autres matériaux entrant dans la construction comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 13/12 - Produits stratifiés composés essentiellement d'une substance à prise hydraulique, p. ex. du béton, du plâtre, du ciment, ou d'autres matériaux entrant dans la construction comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétique
  • B32B 5/16 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par le fait qu'une des couches est formée de particules, p. ex. de copeaux, de fibres hachées, de poudre
  • B32B 5/22 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses
  • B32B 5/24 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse
  • B32B 5/30 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches comprenant des grains ou de la poudre
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 37/14 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches
  • B32B 7/04 - Liaison entre couches
  • B32B 7/08 - Liaison entre couches par des moyens mécaniques
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 29/04 - Produits stratifiés composés essentiellement de papier ou de carton adjacent à une couche particulaire
  • B32B 27/26 - Produits stratifiés composés essentiellement de résine synthétique caractérisée par l'emploi d'additifs particuliers utilisant des durcisseurs
  • B32B 27/28 - Produits stratifiés composés essentiellement de résine synthétique comprenant des copolymères de résines synthétiques non complètement couverts par les sous-groupes suivants
  • B32B 3/06 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour lier les couches ensembleCaractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour attacher le produit à quelque chose d'autre p. ex. à un support
  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B27N 3/06 - Fabrication de panneaux de particules ou de panneaux de fibres, comportant des couches de revêtement préformées, les particules ou les fibres étant comprimées avec les couches du panneau en une seule opération de pressage
  • B29D 99/00 - Matière non prévue dans les autres groupes de la présente sous-classe
  • B44C 1/00 - Procédés non expressément prévus ailleurs pour la production d'effets décoratifs sur des surfaces
  • E04C 2/24 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en bois, fibres, copeaux, tiges de végétaux ou analoguesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en matières plastiquesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en produits mousse lamellaires et composés de matériaux couverts par plusieurs des groupes , ,
  • E04B 1/14 - Structures constituées principalement d'éléments porteurs en forme de blocs ou de dalles les éléments étant composés de plusieurs matériaux
  • E04C 2/22 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en bois, fibres, copeaux, tiges de végétaux ou analoguesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en matières plastiquesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en produits mousse en matières plastiques armées

20.

METHOD FOR MANUFACTURING INKJET PRINTABLE PAPER OR FOIL FOR USE AS A DECOR PAPER OR FOIL

      
Numéro d'application IB2018054239
Numéro de publication 2018/229649
Statut Délivré - en vigueur
Date de dépôt 2018-06-12
Date de publication 2018-12-20
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Clement, Benjamin
  • Ide, Matthias
  • Ledegen, Sam

Abrégé

Method for manufacturing paper or thermoplastic foil or vitrimeric foil printable with an inkjet printer for use as a decor paper, respectively decor foil in a laminate or laminated panel, wherein the method at least comprises the following steps: - the step of providing a paper layer (1), respectively a foil; - the step of coating at least one side of said paper layer (1), respectively of said foil, with an inkjet receiver coating (3) comprising at least pigment (6) and binder (7); characterized in that said inkjet receiver coating (3) further comprises an ink reactive compound. The invention also relates to the papers and foils obtained, as well as to method of manufacturing panels wherein the paper (1) or foil is provided with a printed pattern and used as a decor in the panels.

Classes IPC  ?

  • B41M 5/50 - Feuilles d'enregistrement caractérisées par les revêtements utilisés pour améliorer la réceptivité aux encres, aux colorants ou aux pigments, p. ex. pour jet d'encre ou pour l'enregistrement par transfert thermique de colorants
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

21.

BOARD AND METHOD FOR MANUFACTURING A BOARD

      
Numéro d'application IB2018051903
Numéro de publication 2018/172959
Statut Délivré - en vigueur
Date de dépôt 2018-03-21
Date de publication 2018-09-27
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Board, characterized in that it consists at least of a substrate which is formed at least of a gypsum-based and/or cement-based basic material layer with a compressive strength of 30 kg/cm2 and a resin-based covering provided on at least one side of the substrate, in the form of a laminate layer directly pressed onto the substrate, also named "DPL" (Direct Pressure Laminate).

Classes IPC  ?

  • B32B 13/04 - Produits stratifiés composés essentiellement d'une substance à prise hydraulique, p. ex. du béton, du plâtre, du ciment, ou d'autres matériaux entrant dans la construction comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 13/12 - Produits stratifiés composés essentiellement d'une substance à prise hydraulique, p. ex. du béton, du plâtre, du ciment, ou d'autres matériaux entrant dans la construction comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétique
  • B32B 5/16 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par le fait qu'une des couches est formée de particules, p. ex. de copeaux, de fibres hachées, de poudre
  • B32B 5/22 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses
  • B32B 5/24 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches étant fibreuse ou filamenteuse
  • B32B 5/30 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par la présence de plusieurs couches qui comportent des fibres, filaments, grains ou poudre, ou qui sont sous forme de mousse ou essentiellement poreuses une des couches comprenant des grains ou de la poudre
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 37/14 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches
  • B32B 7/04 - Liaison entre couches
  • B32B 7/08 - Liaison entre couches par des moyens mécaniques
  • B32B 7/12 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives
  • B32B 29/04 - Produits stratifiés composés essentiellement de papier ou de carton adjacent à une couche particulaire
  • B32B 27/26 - Produits stratifiés composés essentiellement de résine synthétique caractérisée par l'emploi d'additifs particuliers utilisant des durcisseurs
  • B32B 27/28 - Produits stratifiés composés essentiellement de résine synthétique comprenant des copolymères de résines synthétiques non complètement couverts par les sous-groupes suivants
  • B32B 3/06 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour lier les couches ensembleCaractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour attacher le produit à quelque chose d'autre p. ex. à un support
  • B32B 3/30 - Produits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche continue dont le périmètre de la section droite a une allure particulièreProduits stratifiés comprenant une couche ayant des discontinuités ou des rugosités externes ou internes, ou une couche de forme non planeProduits stratifiés comprenant une couche ayant des particularités au niveau de sa forme caractérisés par une couche comportant des cavités ou des vides internes caractérisés par une couche comportant des retraits ou des saillies, p. ex. des gorges, des nervures
  • B27N 3/06 - Fabrication de panneaux de particules ou de panneaux de fibres, comportant des couches de revêtement préformées, les particules ou les fibres étant comprimées avec les couches du panneau en une seule opération de pressage
  • B29D 99/00 - Matière non prévue dans les autres groupes de la présente sous-classe
  • B44C 1/00 - Procédés non expressément prévus ailleurs pour la production d'effets décoratifs sur des surfaces
  • E04C 2/24 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en bois, fibres, copeaux, tiges de végétaux ou analoguesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en matières plastiquesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en produits mousse lamellaires et composés de matériaux couverts par plusieurs des groupes , ,
  • E04B 1/14 - Structures constituées principalement d'éléments porteurs en forme de blocs ou de dalles les éléments étant composés de plusieurs matériaux
  • E04C 2/22 - Éléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en bois, fibres, copeaux, tiges de végétaux ou analoguesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en matières plastiquesÉléments de construction de relativement faible épaisseur pour la construction de parties de bâtiments, p. ex. matériaux en feuilles, dalles ou panneaux caractérisés par des matériaux spécifiés en produits mousse en matières plastiques armées

22.

SET OF FLOOR PANELS AND METHOD FOR COMPOSING THE SET OF FLOOR PANELS

      
Numéro d'application IB2017057530
Numéro de publication 2018/100526
Statut Délivré - en vigueur
Date de dépôt 2017-11-30
Date de publication 2018-06-07
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • De Jaeger, Jasper
  • Vangeenberghe, Kristof
  • Verschatse, Bram
  • Cappelle, Mark

Abrégé

Set of floor panels intended for installing a floor in a room, characterized in that the set (2) comprises a plurality of first floor panels (1A), wherein these first floor panels (1A) have a common shape and dimension, and that the set (2) further comprises one or more second floor panels, which show an adaptation (12) of the common shape and/or the common dimension or are provided to this aim, wherein said adaptation (12) is performed corresponding to the aforementioned room (3). The invention also relates to a method for composing such set (2) of floor panels (1A-1B).

Classes IPC  ?

  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
  • B44C 3/12 - Assemblage d'éléments ornementaux sur des cadres, p. ex. plateaux en mosaïque

23.

MANUFACTURING OF DECORATIVE SURFACES

      
Numéro d'application EP2017074341
Numéro de publication 2018/060182
Statut Délivré - en vigueur
Date de dépôt 2017-09-26
Date de publication 2018-04-05
Propriétaire
  • AGFA NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Lenaerts, Jens
  • Willems, Nadine
  • Van Aert, Hubertus

Abrégé

A method for manufacturing decorative surfaces including, in order, the steps of: a) inkjet printing (19) an image on a first thermoplastic foil (12) by jetting and UV curing one or more pigmented free radical UV curable inkjet inks on the first thermoplastic foil (12); b) applying on the inkjet printed image a second thermoplastic foil (12) carrying a layer containing a vinylchloride-vinylacetate-vinylalcohol copolymer with the layer facing the inkjet printed image on the first thermoplastic foil; and c) heat pressing (20) the first and second thermoplastic foils into a decorative laminate; wherein at least one of the first and second thermoplastic foils is a transparent thermoplastic foil; and wherein the one or more pigmented free radical UV curable inkjet inks contain a polymerizable composition having: 30 to 90 wt% of one or more compounds with one ethylenically unsaturated polymerizable group; 10 to 70 wt% of one or more compounds with two ethylenically unsaturated polymerizable groups; and 0 to 10 wt% of one or more compounds with three or more ethylenically unsaturated polymerizable groups, wherein all weight percentages wt% are based upon the total weight of the polymerizable composition.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41M 7/00 - Traitement ultérieur des travaux imprimés, p. ex. chauffage, irradiation
  • B32B 27/00 - Produits stratifiés composés essentiellement de résine synthétique
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • E04F 15/00 - Revêtements de sols

24.

FLOOR PANEL AND DECORATIVE PANEL OR PROFILE

      
Numéro d'application IB2017054010
Numéro de publication 2018/007932
Statut Délivré - en vigueur
Date de dépôt 2017-07-03
Date de publication 2018-01-11
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Vermeulen, Bruno
  • Naeyaert, Christophe

Abrégé

Floor panel with a substrate (13) and layer (14) provided thereon, wherein said top layer (14) comprises a printed decor (15), provided between a foamed PVC sublayer (17) and a transparent wear layer (16), characterized in that said wear layer (16) is free from PVC, is not foamed, and has a thickness Tl which is less than the thickness T2 of said foamed PVC sublayer (17) and a decorative panel or profile.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés

25.

METHOD FOR MANUFACTURING PAPER PRINTABLE WITH INKJET FOR USE AS A DECOR PAPER

      
Numéro d'application IB2017050392
Numéro de publication 2017/130117
Statut Délivré - en vigueur
Date de dépôt 2017-01-25
Date de publication 2017-08-03
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Method for manufacturing paper printable with an inkjet printer for use as a decor paper in a laminate or laminated panel, wherein the method at least comprises the following steps: - the step of providing a paper layer (1); - the step of coating at least one side of said paper layer with an inkjet receiver coating (3) comprising pigment (6) and binder (7); wherein said inkjet receiver coating is applied in at least two partial steps, wherein respectively a first layer (4) with a first composition and, subsequently, a second layer (5) is applied with a second composition, both compositions at least comprising said binder. The invention also relates to the papers, as well as to method of manufacturing panels wherein the paper is provided with a printed pattern and used as a decor in the panels.

Classes IPC  ?

  • B41J 3/407 - Machines à écrire ou mécanismes d'impression ou de marquage sélectif caractérisés par le but dans lequel ils sont construits pour le marquage sur des matériaux particuliers
  • B41M 5/50 - Feuilles d'enregistrement caractérisées par les revêtements utilisés pour améliorer la réceptivité aux encres, aux colorants ou aux pigments, p. ex. pour jet d'encre ou pour l'enregistrement par transfert thermique de colorants
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

26.

FLOOR PANEL FOR FORMING A FLOOR COVERING, AND SUBSTRATE FOR A PANEL

      
Numéro d'application IB2017050161
Numéro de publication 2017/122149
Statut Délivré - en vigueur
Date de dépôt 2017-01-12
Date de publication 2017-07-20
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Segaert, Martin

Abrégé

Floor panel for forming a floor covering, wherein the floor panel (1) comprises a layer-shaped substrate (6), as well as a decorative top layer (7) situated above the substrate (6); and wherein the substrate (6) comprises at least a layer (8) which is realized on the basis of a composition comprising at least a thermoplastic synthetic material, wherein the composition, apart from the thermoplastic synthetic material, also comprises at least one or more elastomers; and that said thermoplastic synthetic material concerns thermoplastic polyester.

Classes IPC  ?

  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés

27.

FLOOR PANEL AND METHOD FOR MANUFACTURING FLOOR PANELS

      
Numéro d'application IB2016056410
Numéro de publication 2017/072657
Statut Délivré - en vigueur
Date de dépôt 2016-10-25
Date de publication 2017-05-04
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Vandevoorde, Christof

Abrégé

Floor panel with a substrate (8) and a top layer of laminate (7), which floor panel (1), at one or more edges (4-5), is provided with a lower edge region (28), characterized in that the laminate (7) extends in one piece from the actual upper surface (29) of the substrate (8) over the lower edge region (28) at least up to a point (32), wherein the laminate surface (30) is situated at a level (L) in a horizontal plane which intersects the aforementioned substrate (8), and that the substrate material (8), at the location of the lower edge region (28), has the same or a lower density than at the actual upper surface (29) of the substrate material (8). The invention also relates to a method for realizing such floor panels (1).

Classes IPC  ?

  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

28.

FLOOR PANEL AND METHOD FOR MANUFACTURING FLOOR PANELS

      
Numéro d'application IB2016053717
Numéro de publication 2017/001976
Statut Délivré - en vigueur
Date de dépôt 2016-06-22
Date de publication 2017-01-05
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Loncke, Frank
  • Vanhastel, Luc
  • Meersseman, Laurent

Abrégé

Floor panel with a substrate (8) and a provided thereon decorative layer (6) of wood veneer (7) having a thickness (T1) of 1 millimeter or less, characterized in that said substrate (8) has an average density of more than 750 kilograms per cubic meter and that said decorative layer (6) is provided on the substrate (8) by means of a layer on the basis of thermosetting resin (9) situated between the substrate (8) and the decorative layer (6). The invention also relates to a method for manufacturing such floor panels (1), wherein a structured veneer surface can be obtained.

Classes IPC  ?

  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables
  • E04F 15/04 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en bois, p. ex. avec organes de jointement en bois
  • B32B 21/02 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré sous forme de fibres, copeaux ou particules
  • B32B 21/14 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant une planche de bois ou une feuille de bois de placage

29.

MANUFACTURING OF DECORATIVE PANELS BY INKJET

      
Numéro d'application EP2016060511
Numéro de publication 2016/188745
Statut Délivré - en vigueur
Date de dépôt 2016-05-11
Date de publication 2016-12-01
Propriétaire
  • AGFA NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s) De Mondt, Roel

Abrégé

A method for manufacturing polymeric decorative panels including, in order, the steps of: a) inkjet printing (19) an image on a first thermoplastic foil (12) using an aqueous pigmented inkjet ink; b) applying a second thermoplastic foil (12) on the inkjet printed image; c) heat pressing (20) the first and second thermoplastic foils into a decorative laminate; and d) cutting the laminate into a decorative panel (22); wherein the aqueous pigmented inkjet ink contains polymeric resin particles and a self-dispersing colour pigment; and wherein at least one of the first and second thermoplastic foils is a transparent foil.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41M 7/00 - Traitement ultérieur des travaux imprimés, p. ex. chauffage, irradiation
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B32B 27/00 - Produits stratifiés composés essentiellement de résine synthétique
  • E04F 15/00 - Revêtements de sols

30.

MANUFACTURING OF DECORATIVE SURFACES BY INKJET

      
Numéro d'application EP2016060507
Numéro de publication 2016/188743
Statut Délivré - en vigueur
Date de dépôt 2016-05-11
Date de publication 2016-12-01
Propriétaire
  • AGFA NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Willems, Nadine
  • De Mondt, Roel

Abrégé

A method for manufacturing decorative surfaces including the steps of: a) inkjet printing (19) an image on a first thermoplastic foil (12) using a pigmented UV curable inkjet ink; b) applying a second thermoplastic foil (12) on the inkjet printed image; and c) heat pressing (20) the first and second thermoplastic foils into a decorative laminate; wherein the pigmented UV curable inkjet ink contains a polymerizable composition having 30 to 70 wt% of monofunctional polymerizable compounds and 30 to 70 wt% of polyfunctional polymerizable compounds, wherein the weight percentage wt% is based on the total weight of the polymerizable composition; and wherein at least one of the first and second thermoplastic foils is a transparent foil.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41M 7/00 - Traitement ultérieur des travaux imprimés, p. ex. chauffage, irradiation
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • C09D 11/101 - Encres spécialement adaptées aux procédés d’imprimerie mettant en œuvre la réticulation par énergie ondulatoire ou par radiation de particules, p. ex. réticulation par UV qui suit l’impression
  • E04F 15/00 - Revêtements de sols

31.

METHOD FOR MANUFACTURING A DECORATIVE PANEL AND DECORATIVE PANEL

      
Numéro d'application IB2016051476
Numéro de publication 2016/151435
Statut Délivré - en vigueur
Date de dépôt 2016-03-16
Date de publication 2016-09-29
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Loncke, Frank
  • Meersseman, Laurent

Abrégé

Method for manufacturing a decorative panel, wherein the method comprises the following steps: the step of providing a substrate material (8); the step of manufacturing a decorative top layer (7); the step of providing the decorative top layer and the substrate material on top of each other; characterized in that for manufacturing the decorative top layer (7), at least two wooden veneer layers (23A-23B) are pressed together with an intermediate layer (24) of thermosetting resin. The invention further relates to a decorative panel (1) which can be obtained by means of this method.

Classes IPC  ?

  • E04F 15/04 - Revêtements de sol composés d'un certain nombre d'éléments semblables uniquement en bois, p. ex. avec organes de jointement en bois
  • E04F 15/20 - Couches isolantes placées séparémentAutres moyens additionnels d'isolationPlanchers flottants pour isolation acoustique
  • B32B 21/00 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B32B 9/04 - Produits stratifiés composés essentiellement d'une substance particulière non couverte par les groupes comprenant une telle substance comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 21/04 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 21/08 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétiqueProduits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine renforcée de fibres
  • B32B 21/14 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant une planche de bois ou une feuille de bois de placage
  • B32B 27/00 - Produits stratifiés composés essentiellement de résine synthétique
  • B32B 27/06 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique
  • B32B 27/08 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique d'une résine synthétique d'une sorte différente
  • B27N 7/00 - Post-traitement, p. ex. réduction du gonflement ou du retrait, surfaçageProtection des bords contre l'humidité
  • B32B 37/12 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par l'usage d'adhésifs
  • B44C 5/00 - Procédés pour la réalisation d'objets décoratifs particuliers

32.

FURNITURE

      
Numéro d'application IB2015058116
Numéro de publication 2016/067162
Statut Délivré - en vigueur
Date de dépôt 2015-10-21
Date de publication 2016-05-06
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Deman, Luc
  • Van Hooydonck, Guy
  • Schacht, Benny

Abrégé

Piece of furniture, comprising a first and a second furniture part (2-3), which are coupled to each other at an angle by means of mechanical coupling means (9), wherein said female part (11) is made as an oblong slot (14) in said second furniture part (3) with an insertion opening (18) for introducing the male part (10), and wherein, when coupling the first furniture part and the second furniture part to each other, the male part is brought from an insertion position in said insertion opening to an end position (20) in said female part by moving the male part and the female part along each other, characterized in that said male part (10) is situated on a narrow end (13) of said first furniture part (2) and is positioned with its center line (21) between the central plane (22) of the first furniture part (2) and the inner side (23) of the first furniture part, whereas said slot (14) is realized in the inwardly directed flat side (15) of the second furniture part (3).

Classes IPC  ?

  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique
  • F16B 12/46 - Assemblages d'angle non métalliques

33.

MANUFACTURING METHODS OF DECORATIVE LAMINATES BY INKJET

      
Numéro d'application EP2015074537
Numéro de publication 2016/066531
Statut Délivré - en vigueur
Date de dépôt 2015-10-22
Date de publication 2016-05-06
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Van Den Bergen, Patrick
  • Van Hunsel, Johan

Abrégé

Manufacturing method of decorative laminates including the steps of: a) printing an ink acceptance layer by jetting droplets having a volume of 1 to 200 nL onto a paper substrate; b) forming a decorative layer by jetting ink droplets having a volume of up to 30 pL of one or more aqueous pigmented inkjet inks onto the dried ink acceptance layer; and c) heat pressing the decorative layer into a decorative laminate; wherein the ink acceptance layer contains an inorganic pigment P and a polymeric binder B in a weight ratio P/B larger than 1.5.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41J 11/00 - Dispositifs ou agencements pour supporter ou manipuler un matériau de copie en feuilles ou en bandes

34.

COMPOSED ELEMENT, DRAWER AND METHOD FOR MANUFACTURING SUCH DRAWER

      
Numéro d'application IB2015057828
Numéro de publication 2016/059549
Statut Délivré - en vigueur
Date de dépôt 2015-10-13
Date de publication 2016-04-21
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Devos, Pieter
  • Cappelle, Mark

Abrégé

Composed element (1), which comprises at least two panel-shaped elements (2, 3), wherein these panel-shaped elements each comprise a coupling zone (4, 5) in which a profile (6, 7) is provided which extends in the longitudinal direction of the respective coupling zone (4, 5), which profiles allow that these two panel-shaped elements can be coupled to each other in a locking manner and to this aim make use of a tongue (8) and a groove (9) which each are provided with locking parts (10, 11), and wherein the profiles allow that these two panel-shaped elements can be coupled and/or uncoupled at least by means of a snap movement, and wherein the tongue (8) comprises a section which is free from a locking part (10).

Classes IPC  ?

  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique
  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • F16B 12/46 - Assemblages d'angle non métalliques
  • F16B 5/00 - Jonction de feuilles ou de plaques soit entre elles soit à des bandes ou barres parallèles à elles

35.

METHOD AND INSTALLATION FOR MANUFACTURING A FLOOR COVERING PRODUCT AND FLOOR COVERING PRODUCT OBTAINED HEREBY

      
Numéro d'application IB2015055826
Numéro de publication 2016/016864
Statut Délivré - en vigueur
Date de dépôt 2015-07-31
Date de publication 2016-02-04
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Naeyaert, Christophe

Abrégé

Method for manufacturing a floor covering product, wherein this method comprises at least a first step of forming a single- or multi-layered substrate (3) by consolidating synthetic material-based starting material (4), as well as comprises a second step after the first step, which preferably is performed in line with the first step, wherein at least one continuous film (6) is laminated onto the substrate (3), characterized in that said laminating is performed by means of a belt press (7).

Classes IPC  ?

  • B32B 21/08 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétiqueProduits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré comprenant du bois comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine renforcée de fibres
  • B32B 27/08 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique d'une résine synthétique d'une sorte différente
  • B32B 27/30 - Produits stratifiés composés essentiellement de résine synthétique comprenant une résine vinyliqueProduits stratifiés composés essentiellement de résine synthétique comprenant une résine acrylique
  • B32B 27/32 - Produits stratifiés composés essentiellement de résine synthétique comprenant des polyoléfines
  • B32B 27/36 - Produits stratifiés composés essentiellement de résine synthétique comprenant des polyesters
  • B32B 37/04 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par la fusion partielle d'au moins une couche
  • E04F 13/18 - Revêtements ou enduits, p. ex. pour murs ou plafonds constitués d'éléments d'habillage ou de garnissageLeurs bâtisLeurs moyens de fixation constitués de plusieurs éléments d'habillage ou de garnissage semblables en matières plastiques organiques avec ou sans armatures ou matériau de remplissage
  • B32B 37/14 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches
  • B32B 37/10 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par la technique de pressage, p. ex. faisant usage de l'action directe du vide ou d'un fluide sous pression
  • B32B 37/15 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui est fabriquée et immédiatement stratifiée avant d'atteindre un état stable, p. ex. dans lesquels une couche est extrudée et stratifiée à l'état semi-pâteux
  • B32B 38/06 - Gaufrage
  • B32B 38/00 - Opérations auxiliaires liées aux procédés de stratification
  • B32B 37/24 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par les propriétés des couches avec au moins une couche qui ne présente pas de cohésion avant la stratification, p. ex. constituée de matériau granulaire projeté sur un substrat
  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés
  • B44B 5/00 - Machines ou appareils pour estamper des motifs décoratifs ou des marques, p. ex. pour la frappe de monnaie
  • B44C 1/24 - Pressage ou estampage de dessins ornementaux sur des surfaces
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

36.

FLOOR PANEL AND METHOD FOR MANUFACTURING FLOOR PANELS

      
Numéro d'application IB2015054964
Numéro de publication 2016/001859
Statut Délivré - en vigueur
Date de dépôt 2015-07-01
Date de publication 2016-01-07
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Naeyaert, Christophe

Abrégé

Floor panel and method for manufacturing floor panels. Floor panel, wherein this floor panel (1) comprises at least a substrate and a decor provided thereon, wherein said substrate (11) substantially consists of thermoplastic material and/or filler materials, the substrate enclosing one or more glass fiber cloths (12) optionally bordering a portion obtained by hardening of plastisol, wherein the total weight of glass fiber cloths is more than 85 grams per square meter. The invention also relates to a method for manufacturing floor panels which enclose a glass fiber cloth and a layer of plastisol on said glass fiber cloth.

Classes IPC  ?

  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés
  • B32B 5/02 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments
  • B32B 5/06 - Produits stratifiés caractérisés par l'hétérogénéité ou la structure physique d'une des couches caractérisés par les caractéristiques de structure d'une couche comprenant des fibres ou des filaments caractérisés par une couche fibreuse imbriquée ou cousue avec une autre couche, p. ex. de fibres, de papier

37.

FLOOR PANEL FOR FORMING A FLOOR COVERING AND METHOD FOR MANUFACTURING SUCH FLOOR PANELS

      
Numéro d'application IB2015051850
Numéro de publication 2015/140682
Statut Délivré - en vigueur
Date de dépôt 2015-03-13
Date de publication 2015-09-24
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Floor panel for forming a floor covering, wherein this floor panel substantially consists of synthetic material; wherein this floor panel comprises a decorative upper side, characterized in that the decorative upper side is formed at least by a decorative layer which comprises a digital print or consists of a digital print.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés

38.

MANUFACTURING OF DECORATIVE LAMINATES BY INKJET

      
Numéro d'application EP2015052030
Numéro de publication 2015/117910
Statut Délivré - en vigueur
Date de dépôt 2015-02-02
Date de publication 2015-08-13
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Loccufier, Johan
  • Clement, Benjamin
  • De Mondt, Roel

Abrégé

A method for manufacturing decorative laminates including the steps of: a) impregnating a paper substrate with a thermosetting resin by submersion of the paper substrate in a bath of thermosetting resin; b) applying on the thermosetting resin impregnated paper substrate an ink acceptance layer containing an inorganic pigment P and a polymeric binder B having a weight ratio P/B of inorganic pigment to polymeric binder of larger than 1.5; c) jetting on the ink acceptance layer a colour pattern with one or more aqueous pigmented inkjet inks and/or organic solvent based pigmented inkjet inks containing a colour pigment C; and d) heat pressing the thermosetting paper into a decorative laminate, wherein the weight ratio P/C of the inorganic pigment of the ink acceptance layer to the jetted colour pigment in the colour pattern is larger than 4.0.

Classes IPC  ?

  • D21H 27/26 - Structures appliquées sur la surface par des procédés de fabrication particuliers, p. ex. dans des presses caractérisées par la feuille de couverture ou par les couches supérieures des structures
  • B32B 29/00 - Produits stratifiés composés essentiellement de papier ou de carton
  • B32B 29/06 - Produits stratifiés composés essentiellement de papier ou de carton spécialement traité, p. ex. glacé, parcheminé
  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B32B 3/06 - Caractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour lier les couches ensembleCaractérisés par des caractéristiques de forme en des endroits déterminés, p. ex. au voisinage des bords pour attacher le produit à quelque chose d'autre p. ex. à un support
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • D21H 17/67 - Composés insolubles dans l'eau, p. ex. charges ou pigments
  • D21H 17/68 - Composés insolubles dans l'eau, p. ex. charges ou pigments siliceux, p. ex. argiles
  • D21H 19/36 - Couches contenant des pigments
  • D21H 21/28 - Colorants
  • E04F 15/02 - Revêtements de sol composés d'un certain nombre d'éléments semblables

39.

MANUFACTURING OF DECORATIVE WORKPIECES BY INKJET

      
Numéro d'application EP2015052164
Numéro de publication 2015/117943
Statut Délivré - en vigueur
Date de dépôt 2015-02-03
Date de publication 2015-08-13
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Van Garsse, Joris
  • Meersseman, Laurent

Abrégé

To compensate inaccuracies in the finishing of a decorative workpiece such as cutting or producing tongue-and-groove profiles to the decorative workpiece, a bleed area (801) is added to the decorative pattern (800) carried by a decoration layer of a decorative workpiece. The bleed area (801) is filled with image content of the decorative pattern. In the bleed area (801) a mark such as a cut mark or a control mark may be digital printed.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • H04N 1/387 - Composition, repositionnement ou autre modification des originaux
  • B41J 11/00 - Dispositifs ou agencements pour supporter ou manipuler un matériau de copie en feuilles ou en bandes

40.

MANUFACTURING OF DECORATIVE WORKPIECES BY INKJET

      
Numéro d'application EP2015052165
Numéro de publication 2015/117944
Statut Délivré - en vigueur
Date de dépôt 2015-02-03
Date de publication 2015-08-13
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • Cloots, Tom
  • Meersseman, Laurent
  • Van Garsse, Joris

Abrégé

A method for manufacturing decorative workpieces including the step of nesting (100) a set of decorative patterns (201-206), digital printed on a decoration layer (301) to reduce the waste of decoration layer. To perform a corresponding relief for the nested decorative patterns on a nested decorative workpiece, the relief provided by a digital relief apparatus is in a correct match with the nested decorative workpiece. If the printing zone of the digital printer has a failure zone, the nesting method prevents arranging of the decorative patterns in this failure zone.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • G06F 3/12 - Sortie numérique vers une unité d'impression
  • H04N 1/387 - Composition, repositionnement ou autre modification des originaux
  • G06K 15/02 - Dispositions pour produire une présentation visuelle permanente des données de sortie utilisant des imprimantes

41.

METHODS FOR MANUFACTURING PANELS HAVING A DECORATIVE SURFACE

      
Numéro d'application IB2015050823
Numéro de publication 2015/118451
Statut Délivré - en vigueur
Date de dépôt 2015-02-03
Date de publication 2015-08-13
Propriétaire
  • UNILIN, BVBA (Belgique)
  • AGFA GRAPHICS NV (Belgique)
Inventeur(s)
  • Clement, Benjamin
  • Meersseman, Laurent
  • Van Den Bergen, Patrick
  • Vanhooydonck, Rudi

Abrégé

Method for manufacturing panels having a decorative surface, wherein said panels (7) at least comprise a substrate (8) and a top layer (9), wherein said top layer (9) comprises a paper layer (2) having a printed pattern, and wherein said method at least comprises the step (S1) of providing said paper layer (2) with thermosetting resin by transporting said paper layer (2) through a resin application device in a resin application direction (D1), and the step of providing said paper layer (2) with at least a portion of said printed pattern by means of a digital inkjet printer (18), characterized in that said printed pattern comprises a wood motif having wood nerves (40) extending generally in a nerve direction (D4) substantially corresponding to said resin application direction (D1).

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B41J 3/28 - Machines à écrire ou mécanismes d'impression ou de marquage sélectif caractérisés par le but dans lequel ils sont construits pour l'impression de haut en bas des surfaces planes, p. ex. de livres, dessins, boîtes

42.

METHOD FOR MANUFACTURING PANELS HAVING A DECORATIVE SURFACE

      
Numéro d'application IB2015050088
Numéro de publication 2015/104652
Statut Délivré - en vigueur
Date de dépôt 2015-01-06
Date de publication 2015-07-16
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Method for manufacturing panels having a decorative surface, wherein said panels (7) at least comprise a substrate (8) and a top layer (9), wherein said top layer (9) comprises a paper layer (2) having a printed pattern, and wherein said method at least comprises the step (S1) of providing said paper layer (2) with thermosetting resin (3) and the step of providing said resin provided paper layer (2) with at least a portion of said printed pattern, characterized in that for providing said portion of said printed pattern use is made of pigment containing inks deposited on said paper layer (2) by means of a digital inkjet printer (18), and in that the dry weight of the total volume of said pigment containing inks deposited on said paper layer is lower than 9 grams per square meter, wherein for said pigment containing ink use is made of a water-based ink.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet

43.

MANUFACTURING OF DECORATIVE SURFACES BY INKJET

      
Numéro d'application EP2014053868
Numéro de publication 2015/058865
Statut Délivré - en vigueur
Date de dépôt 2014-02-27
Date de publication 2015-04-30
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • De Mondt, Roel
  • Meersseman, Laurent

Abrégé

A method for manufacturing decorative surfaces including the steps of: inkjet printing (15) a colour pattern with one or more aqueous inkjet inks including a polyurethane based latex binder; impregnating (18) a paper substrate with a thermosetting resin; and heat pressing (21) the thermosetting resin impregnated paper substrate carrying the inkjet printed colour pattern into a decorative surface.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B41M 7/00 - Traitement ultérieur des travaux imprimés, p. ex. chauffage, irradiation

44.

MANUFACTURING OF DECORATIVE SURFACES BY INKJET

      
Numéro d'application EP2014071733
Numéro de publication 2015/058974
Statut Délivré - en vigueur
Date de dépôt 2014-10-10
Date de publication 2015-04-30
Propriétaire
  • AGFA GRAPHICS NV (Belgique)
  • UNILIN BVBA (Belgique)
Inventeur(s)
  • De Mondt, Roel
  • Torfs, Rita

Abrégé

A method of manufacturing a decorative surface including the steps of: • a) impregnating (18) a paper substrate with a thermosetting resin; b) jetting (15) a colour pattern with one or more aqueous inkjet inks including a polymer latex binder on the thermosetting resin impregnated paper; c) drying the one or more aqueous inkjet inks; and d) heat pressing the thermosetting paper carrying the colour pattern into a decorative surface.

Classes IPC  ?

  • B41M 5/00 - Procédés de reproduction ou méthodes de reproduction ou de marquageMatériaux en feuilles utilisés à cet effet
  • B41M 5/52 - Revêtements macromoléculaires
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B41M 7/00 - Traitement ultérieur des travaux imprimés, p. ex. chauffage, irradiation

45.

PROCESS AND DEVICE FOR GLUING FIBERS FOR THE PRODUCTION OF FIBERBOARDS

      
Numéro d'application IB2014065304
Numéro de publication 2015/056174
Statut Délivré - en vigueur
Date de dépôt 2014-10-14
Date de publication 2015-04-23
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Heyen, Guenter
  • Aikman, Ric

Abrégé

The present invention provides in a process for obtaining glued fibers (75) suitable for the production of fiberboards, characterized by the following steps: carrying fibers (75) in an air stream for the removal of high density contaminants from the dried fibers by means of gravity, and gluing said dried fibers. The invention thereto also provides a modified air density separator (64) comprising one or more injection means (80) for a gluing composition. The invention also relates to a fiber board manufacturing plant comprising an air density separator (64) according to an embodiment of the invention.

Classes IPC  ?

  • B27N 3/00 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres
  • B27N 1/00 - Prétraitement du matériau de moulage
  • B27N 1/02 - Mélange du matériau avec un agent liant

46.

METHOD FOR MANUFACTURING PANELS

      
Numéro d'application IB2014060433
Numéro de publication 2014/167472
Statut Délivré - en vigueur
Date de dépôt 2014-04-04
Date de publication 2014-10-16
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Clement, Benjamin

Abrégé

Method for manufacturing panels of the type which is at least composed of a substrate (2) and, provided on said substrate (2), a top layer (3) with a printed decor (4), wherein the top layer (3) comprises at least two material layers (9-11), namely at least a first material layer forming a basic layer (9) for a second material layer (11) provided thereon in the form of a print (12), wherein the method consists at least of applying said two material layers (9-11), wherein said print (12) or second material layer (11) is performed directly on the substrate material (2) and this print (12) forms at least a portion of said printed decor (4), characterized in that, for applying said first material layer (9) or basic layer, it is started from a water-based two-component lacquer.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

47.

MANUFACTURING OF SHEET MATERIAL AND BIOLOGICAL GLUE SUITABLE FOR THIS PURPOSE.

      
Numéro d'application IB2014060325
Numéro de publication 2014/162253
Statut Délivré - en vigueur
Date de dépôt 2014-03-31
Date de publication 2014-10-09
Propriétaire UNILIN BVBA (Belgique)
Inventeur(s)
  • Nel, Koen
  • Baert, Jimmy

Abrégé

The present invention relates to a glue composition for glueing lignocellulose- containing material, comprising: water, a vegetable source of protein, a binding agent, and a source of lithium or a source of magnesium. The glue is suitable for glueing the lignocellulose-containing material for manufacturing an OSB, plywood board, fiberboard or particle board. The invention also relates to a method for manufacturing the glue composition, methods for manufacturing board materials with the glue composition, and board materials comprising the glue composition, obtainable by a method according to the invention.

Classes IPC  ?

  • B27M 3/00 - Fabrication ou remise en état d'articles particuliers semi-finis ou finis
  • B27N 3/00 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres
  • B32B 21/00 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré
  • B29C 70/00 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts
  • C09J 189/00 - Adhésifs à base de protéinesAdhésifs à base de leurs dérivés
  • C08L 79/02 - Polyamines
  • C08L 89/00 - Compositions contenant des protéinesCompositions contenant leurs dérivés
  • C08L 97/00 - Compositions contenant des matières contenant de la lignine
  • C08L 97/02 - Matériau lignocellulosique, p. ex. bois, paille ou bagasse

48.

FINISHING SET FOR A FLOOR COVERING

      
Numéro d'application IB2014059051
Numéro de publication 2014/128609
Statut Délivré - en vigueur
Date de dépôt 2014-02-17
Date de publication 2014-08-28
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Coemans, Wouter
  • Vanhastel, Luc

Abrégé

Finishing set for a floor covering, wherein this finishing set consists at least of, on the one hand, a finishing profile (A) and, on the other hand, a holder (B) for attaching said finishing profile (A) between, against or onto said floor covering (12, 13), with the characteristic that the finishing profile (A) comprises at least one continuously rotatable wing (1), which is self-tensioning.

Classes IPC  ?

  • E04F 19/06 - BorduresBandes de finition, p. ex. baguettesCorniches pour l'éclairage spécialement conçus pour maintenir des panneaux

49.

METHOD AND DEVICE FOR MANUFACTURING PRODUCTS HAVING A SURFACE PROVIDED WITH EMBOSSMENTS, AND PRODUCTS OBTAINED THEREBY

      
Numéro d'application IB2014058464
Numéro de publication 2014/115086
Statut Délivré - en vigueur
Date de dépôt 2014-01-22
Date de publication 2014-07-31
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Cappelle, Mark
  • Naeyaert, Christophe
  • De Jaeger, Jasper
  • Van Hooydonck, Guy

Abrégé

Method for manufacturing a product (1) having a surface (3) provided with embossments (2), wherein a material web (4) is brought into contact with a roller (5), which roller (5) is provided with a relief (7) at its surface (6), with which, via this relief (7), embossments are formed in the material web (4), characterized in that for said roller use is made of a roller, the circumference of which, or at least certain parts thereof, and more particularly the length of the circumference, is variable, or alternatively this circumference is variable by making use of embossing elements, wherein the mutual angular position thereof is adjustable.

Classes IPC  ?

  • B44B 5/00 - Machines ou appareils pour estamper des motifs décoratifs ou des marques, p. ex. pour la frappe de monnaie
  • B44B 5/02 - MatricesAccessoires
  • B44C 1/24 - Pressage ou estampage de dessins ornementaux sur des surfaces
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

50.

CONNECTION DEVICE FOR TWO FURNITURE PARTS TO BE CONNECTED TO EACH OTHER, AS WELL AS PIECE OF FURNITURE WHICH USES SUCH CONNECTION DEVICE

      
Numéro d'application IB2013058486
Numéro de publication 2014/041498
Statut Délivré - en vigueur
Date de dépôt 2013-09-12
Date de publication 2014-03-20
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Deman, Luc
  • Maertens, Luc

Abrégé

Connection device for two furniture parts which have to be interconnected, with a first connection portion (6) which is realized at least as a spreading system (7) and which is intended for being provided in a recess (8) in a first furniture part (2), with a second connection portion (9) which is intended for extending outside of the recess (8) for cooperating with a second furniture part (10) in this manner, as well as an activation mechanism (11) for activating the spreading system (7), characterized in that the spreading system (7) comprises at least two mutually rotatable parts, a first part (12) and a second part (13), respectively, wherein the mutual rotation of which, in function of the realized mutual angle position, effects a spreading effect.

Classes IPC  ?

  • F16B 12/20 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique utilisant des brides, clips, coins, boulons coulissants ou dispositifs similaires

51.

PRINTED PAPER SHEET, DECORATIVE PANEL, ITEM OF FURNITURE AND METHOD FOR MANUFACTURING AN ITEM OF FURNITURE

      
Numéro d'application IB2013056311
Numéro de publication 2014/024101
Statut Délivré - en vigueur
Date de dépôt 2013-08-01
Date de publication 2014-02-13
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Schacht, Benny

Abrégé

Printed paper sheet for manufacturing decorative panels, wherein said paper sheet (1) carries the digitally printed pattern (2A-2C) for a plurality of said decorative panels, characterized in that said plurality of said decorative panels comprises at least two panels of different size and in that predetermined portions (3A-3C) of the paper sheet (1) comprise the digitally printed pattern for said two decorative panels.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs
  • B44F 9/02 - Dessins imitant des modèles naturels les veines du bois
  • D21H 19/00 - Papier couchéMatériaux de couchage

52.

METHOD FOR MANUFACTURING PANELS HAVING A DECORATIVE SURFACE

      
Numéro d'application IB2013056310
Numéro de publication 2014/024100
Statut Délivré - en vigueur
Date de dépôt 2013-08-01
Date de publication 2014-02-13
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Clement, Benjamin
  • De Boe, Luc

Abrégé

Method for manufacturing panels having a decorative surface, wherein said panels (7) at least comprise a substrate (8) and a top layer (9), wherein said top layer (9) comprises a paper layer (2) having a printed pattern, and wherein said method at least comprises the step (SI) of providing said paper layer (2) with thermosetting resin (3) and the step of providing said resin provided paper layer (2) with at least a portion of said printed pattern, characterized in that for providing said portion of said printed pattern use is made of pigment containing inks deposited on said paper layer (2) by means of a digital inkjet printer (18), and in that the dry weight of the total volume of said pigment containing inks deposited on said paper layer is lower than 15 grams per square meter.

Classes IPC  ?

  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

53.

UNIFIT

      
Numéro d'application 166276800
Statut Enregistrée
Date de dépôt 2014-02-06
Date d'enregistrement 2016-01-04
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 06 - Métaux communs et minerais; objets en métal
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not made of metal, namely, interlocking planks, tiles and panels for floors, floors, not of metal, namely vinyl floor coverings, laminate flooring, wood floorings, parquet flooring; floor tiles, not of metal; panels, not of metal, for floor, parquet floors, boards, planks, tiles and panels for floors, all the aforesaid goods made out of wood or wood or fibre containing materials, or as laminates; profiles and floor skirting boards; flooring underlayment, non-metallic; non-metallic expansion joints for floors; floor tiles, vinyl floor coverings.

54.

PANEL FOR FORMING A FLOOR COVERING, METHOD FOR MANUFACTURING SUCH PANELS AND GRANULATE APPLIED HEREWITH.

      
Numéro d'application IB2013054480
Numéro de publication 2013/179260
Statut Délivré - en vigueur
Date de dépôt 2013-05-30
Date de publication 2013-12-05
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Segaert, Martin
  • Naeyaert, Christophe

Abrégé

Panel for forming a floor covering, wherein this panel (1) comprises at least a layer (9) of thermoplastic material, characterized in that said layer (9) also comprises at least individual fibers having a length greater than 1 millimeter.

Classes IPC  ?

  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés
  • B29C 47/10 - Alimentation en matière à mouler de l'extrudeuse
  • B29C 70/50 - Façonnage ou imprégnation par compression pour la fabrication d'objets de longueur indéfinie, p. ex. de "prepregs", de préimprégnés [SMC] ou de nappes multiaxiales [XMC]
  • B29C 43/30 - Fabrication d'objets multicouches ou polychromes
  • B29C 70/02 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant des combinaisons de renforcements et de matières de remplissage dans une matrice, formant une ou plusieurs couches, avec ou sans couches non renforcées ou non remplies
  • B29C 70/12 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant uniquement des renforcements, p. ex. matières plastiques auto-renforçantes des renforcements fibreux uniquement caractérisées par la structure des renforcements fibreux utilisant des fibres courtes, p. ex. sous forme d'un mat
  • B27N 3/06 - Fabrication de panneaux de particules ou de panneaux de fibres, comportant des couches de revêtement préformées, les particules ou les fibres étant comprimées avec les couches du panneau en une seule opération de pressage
  • B32B 27/12 - Produits stratifiés composés essentiellement de résine synthétique adjacente à une couche fibreuse ou filamenteuse
  • B32B 27/30 - Produits stratifiés composés essentiellement de résine synthétique comprenant une résine vinyliqueProduits stratifiés composés essentiellement de résine synthétique comprenant une résine acrylique

55.

PANEL FOR FORMING A FLOOR COVERING AND METHOD FOR MANUFACTURING SUCH PANELS.

      
Numéro d'application IB2013054481
Numéro de publication 2013/179261
Statut Délivré - en vigueur
Date de dépôt 2013-05-30
Date de publication 2013-12-05
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Segaert, Martin
  • Naeyaert, Christophe

Abrégé

Panel for forming a floor covering, wherein this panel (1) comprises at least two layers (9A-9B) of thermoplastic material, characterized in that said two layers (9A- 9B) substantially consist of a strewn and pressed granulate (23), wherein the respective layers (9 A-9B) enclose a glass fiber layer (12).

Classes IPC  ?

  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés
  • B32B 27/30 - Produits stratifiés composés essentiellement de résine synthétique comprenant une résine vinyliqueProduits stratifiés composés essentiellement de résine synthétique comprenant une résine acrylique
  • B29C 47/10 - Alimentation en matière à mouler de l'extrudeuse
  • B27N 3/06 - Fabrication de panneaux de particules ou de panneaux de fibres, comportant des couches de revêtement préformées, les particules ou les fibres étant comprimées avec les couches du panneau en une seule opération de pressage
  • B29C 43/30 - Fabrication d'objets multicouches ou polychromes
  • B29C 70/08 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant uniquement des renforcements, p. ex. matières plastiques auto-renforçantes des renforcements fibreux uniquement comprenant des combinaisons de différentes formes de renforcements fibreux incorporés dans une matrice, formant une ou plusieurs couches, avec ou sans couches non renforcées
  • B32B 37/04 - Procédés ou dispositifs pour la stratification, p. ex. par polymérisation ou par liaison à l'aide d'ultrasons caractérisés par la fusion partielle d'au moins une couche
  • B29C 70/50 - Façonnage ou imprégnation par compression pour la fabrication d'objets de longueur indéfinie, p. ex. de "prepregs", de préimprégnés [SMC] ou de nappes multiaxiales [XMC]
  • B29C 70/02 - Façonnage de matières composites, c.-à-d. de matières plastiques comprenant des renforcements, des matières de remplissage ou des parties préformées, p. ex. des inserts comprenant des combinaisons de renforcements et de matières de remplissage dans une matrice, formant une ou plusieurs couches, avec ou sans couches non renforcées ou non remplies
  • B29B 15/10 - Revêtement ou imprégnation

56.

METHOD FOR MANUFACTURING A DRAWER

      
Numéro d'application IB2013050948
Numéro de publication 2013/121320
Statut Délivré - en vigueur
Date de dépôt 2013-02-05
Date de publication 2013-08-22
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Devos, Pieter

Abrégé

Method for manufacturing drawers, wherein the drawers (1) comprise wails (2-3-4- 5) as well as a bottom (6), and wherein at least a first and a second of said walls (3- 4) comprise a tongue (10) and a groove (11) with locking parts (12-13), and wherein the respective groove (11) is provided on the inner side of the first wall (3), whereas the respective tongue (10) is provided on the distal end (19) of the second wall (4), characterized in that said first wall (3) and second wall (4) are manufactured of respectively one board (23).

Classes IPC  ?

  • A47B 88/00 - Tiroirs pour tables, meubles à tiroirs ou meubles analoguesGuides pour tiroirs

57.

COMPOSED ELEMENT AND CORNER CONNECTION APPLIED HEREWITH

      
Numéro d'application IB2013051018
Numéro de publication 2013/118075
Statut Délivré - en vigueur
Date de dépôt 2013-02-07
Date de publication 2013-08-15
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Devos, Pieter
  • Maertens, Luc
  • Deman, Luc

Abrégé

Composed element and corner connection applied herewith. Composed element, with at least two wood-based panel-shaped elements (2a, 2b); wherein said panel-shaped elements (2a, 2b) can be coupled to each other at an angle and with a miter joint by means of a locking tongue (8) and groove (9) connection; wherein the tongue (8) consists of a split tongue, with thus at least a first tongue portion and a second tongue portion, as well as a slit (12) situated there between; characterized in that said slit (12), seen in cross-section, globally extends according to a direction (L2) which deviates from the direction of the center line (Ma) of the panel-shaped element on which the tongue is provided.

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • F16B 12/46 - Assemblages d'angle non métalliques
  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique

58.

PACKAGED SET OF PANELS

      
Numéro d'application IB2012056939
Numéro de publication 2013/084143
Statut Délivré - en vigueur
Date de dépôt 2012-12-04
Date de publication 2013-06-13
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Naeyaert, Christophe
  • Meersseman, Laurent
  • Depraetere, Steven

Abrégé

Packaged set of panels, such as furniture, floor, ceiling and/or wall panels, consisting of a package, wherein this package is at least composed of, on the one hand, one or more panels (2), which, at least on one pair of opposite panel edges (3-4-5-6), comprise coupling parts (7-8-9-10), or tiles of a stone-like material, whether or not comprising coupling parts, and, on the other hand, a packaging (11), consisting of one or more packaging parts (12-13-14-15), characterized in that the package comprises at least one crumple zone (16).

Classes IPC  ?

  • B65D 5/50 - Éléments internes de support ou de protection du contenu
  • B65D 81/107 - Réceptacles, éléments d'emballage ou paquets pour contenus présentant des problèmes particuliers de stockage ou de transport ou adaptés pour servir à d'autres fins que l'emballage après avoir été vidés de leur contenu spécialement adaptés pour protéger leur contenu des dommages mécaniques maintenant le contenu en position éloignée des parois de l'emballage ou des autres pièces du contenu utilisant des blocs de matériau amortisseur de chocs
  • B65D 81/05 - Réceptacles, éléments d'emballage ou paquets pour contenus présentant des problèmes particuliers de stockage ou de transport ou adaptés pour servir à d'autres fins que l'emballage après avoir été vidés de leur contenu spécialement adaptés pour protéger leur contenu des dommages mécaniques maintenant le contenu en position éloignée des parois de l'emballage ou des autres pièces du contenu

59.

PIECE OF FURNITURE AND METHOD FOR MANUFACTURING FURNITURE

      
Numéro d'application IB2012056838
Numéro de publication 2013/080160
Statut Délivré - en vigueur
Date de dépôt 2012-11-29
Date de publication 2013-06-06
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Van Hooydonck, Guy

Abrégé

Piece of furniture, which comprises one or more furniture parts (2) as well as one or more furniture fitting elements (3), which are connected to the furniture parts (2) via attachments (4), characterized in that at least one of said attachments (4) is formed by, on the one hand, an opening (10) in the wall (8) of the respective furniture part (2), wherein this opening (10) is provided with at least one collar (11), and, on the other hand, a single- or multi-part attachment element (12) which works in conjunction with the respective furniture fitting element (3) and which can be provided in said opening (10), wherein this attachment element (12) is provided with one or more locking parts (13) which engage behind the collar (11) or collars.

Classes IPC  ?

  • F16B 12/24 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique utilisant des clavettes, chevilles ou dispositifs similaires indépendants
  • F16B 12/26 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique utilisant des dispositifs à action rapide, p. ex. type bouton pression
  • A47B 95/00 - Accessoires pour meubles

60.

PANEL AND METHOD FOR MANUFACTURING PANELS

      
Numéro d'application IB2012055154
Numéro de publication 2013/050910
Statut Délivré - en vigueur
Date de dépôt 2012-09-27
Date de publication 2013-04-11
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Vandevoorde, Christof
  • Naeyaert, Christophe

Abrégé

Floor panel comprising a core (13), a print (16) and a wear resistant layer (17), wherein the core (13) is assembled at least from a plurality of paper sheets, or other carrier sheets (14), impregnated with a thermosetting resin (15).

Classes IPC  ?

  • B32B 27/04 - Produits stratifiés composés essentiellement de résine synthétique comme substance d'imprégnation, de collage, ou d'enrobage
  • B32B 27/10 - Produits stratifiés composés essentiellement de résine synthétique comme seul composant ou composant principal d'une couche adjacente à une autre couche d'une substance spécifique de papier ou de carton
  • B32B 27/42 - Produits stratifiés composés essentiellement de résine synthétique comprenant des résines de condensation d'aldéhydes, p. ex. avec des phénols, des urées ou des mélamines
  • B32B 29/00 - Produits stratifiés composés essentiellement de papier ou de carton
  • E04F 15/10 - Revêtements de sol composés d'un certain nombre d'éléments semblables en d'autres matériaux, p. ex. en matériaux fibreux ou en copeaux, en matières plastiques organiques, en magnésite, en agglomérés
  • B44C 5/04 - Plaques ornementales, p. ex. panneaux décoratifs, placages décoratifs

61.

FINISHING PROFILE FOR A FLOOR COVERING

      
Numéro d'application IB2012053713
Numéro de publication 2013/038277
Statut Délivré - en vigueur
Date de dépôt 2012-07-20
Date de publication 2013-03-21
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Meersseman, Laurent
  • Vanhastel, Luc

Abrégé

Finishing profile for a floor covering. Finishing profile for a floor covering, wherein this finishing profile (4) substantially consists of a body (10) with a decorative side (11), characterized in that said body d0) comprises one or more internal prefabricated boundary surfaces (21), wherein these prefabricated boundary surfaces (21) can be exposed for forming a joint with a similar finishing profile (4), preferably a mitre joint. Finishing profile for a floor covering - not shown - which consists of a body comprising a moisture-sensitive material and having portions of a water-resistant material, wherein a decorative layer shaped covering extends uninterruptedly at least over the transition between the water-sensitive material of the rest of the body and this water-re- sistent material.

Classes IPC  ?

  • E04F 19/04 - BorduresBandes de finition, p. ex. baguettesCorniches pour l'éclairage pour utiliser entre le plancher ou le plafond et le mur, p. ex. plinthe
  • E04F 19/02 - BorduresBandes de finition, p. ex. baguettesCorniches pour l'éclairage

62.

DRAWER, DRAWER CONSTRUCTION AND METHOD FOR MANUFACTURING A DRAWER

      
Numéro d'application IB2012053206
Numéro de publication 2013/001442
Statut Délivré - en vigueur
Date de dépôt 2012-06-25
Date de publication 2013-01-03
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Devos, Pieter
  • Schacht, Benny
  • Van Hooydonck, Guy

Abrégé

Method for manufacturing drawers, wherein the drawers (1) comprise walls (2-3-4- 5), as well as a bottom (6), and wherein at least a first and a second of said walls (3-4) comprise a tongue (10) and a groove (11) with locking parts (12-13), and wherein the respective groove (11) is provided on the interior side of the first wall (3), whereas the respective tongue (10) is provided on the distal end (19) of the second wall (4), characterized in that said first wall (3) and second wall (4) are manufactured of respectively one board (23).

Classes IPC  ?

  • B27F 1/08 - Fabrication de queues d'aronde, languettes ou tenons, de longueur limitée définie
  • B27M 3/18 - Fabrication ou remise en état d'articles particuliers semi-finis ou finis de mobilier
  • B27M 1/08 - Travail du bois non prévu dans les sous-classes , p. ex. par étirage par des procédés à plusieurs étapes
  • A47B 88/00 - Tiroirs pour tables, meubles à tiroirs ou meubles analoguesGuides pour tiroirs
  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique

63.

COMPOSED ELEMENT AND REAR WALL CONSTRUCTION APPLIED HEREWITH

      
Numéro d'application IB2012051496
Numéro de publication 2012/131603
Statut Délivré - en vigueur
Date de dépôt 2012-03-28
Date de publication 2012-10-04
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Deman, Luc
  • Cappelle, Mark
  • Vanhastel, Luc
  • Marres, Maarten
  • Van Troys, Jan

Abrégé

Composed element, more particularly a piece of furniture, wherein this composed element (1) comprises at least a rear wall, as well as a number of constructional parts (3) forming a whole in which the rear wall has to be provided, wherein the rear wall forms the rear side of the composed element (1 ) and consists of one or more rear wall parts (9-10), characterized in that the composed element (1) comprises seats for installing at least one of the rear wall parts (9-10), which are configured such that said rear wall part (9-10) can be slid into the seats starting from the rear side of the composed element (1), more particularly from a position which differs from the final plane in which the rear wall part (9-10) will be situated in the final condition.

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • F16B 12/46 - Assemblages d'angle non métalliques
  • A47B 96/20 - Panneaux de meubles ou éléments de meubles similaires

64.

MULTIFIT

      
Numéro d'application 159168500
Statut Enregistrée
Date de dépôt 2012-08-27
Date d'enregistrement 2014-08-11
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
  • 02 - Couleurs, vernis, laques
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques
  • 20 - Meubles et produits décoratifs
  • 21 - Ustensiles, récipients, matériaux pour le ménage; verre; porcelaine; faience
  • 24 - Tissus et produits textiles
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Building materials, not made of metal, namely fascia, soffits, interlocking planks, tiles and panels for floors, walls and ceilings; floors, not of metal, namely vinyl floor coverings, laminate flooring, linoleum flooring, marble flooring, wood floorings, parquet flooring; floor tiles, not of metal; panels, not of metal, for floor, wall namely wall units and ceiling coverings; parquet floors, boards, planks, tiles and panels for floors, walls and ceilings; all the aforesaid goods made out of wood or wood or fibre containing materials, or as laminates; profiles and floor skirting boards; flooring underlayment, non-metallic; non-metallic expansion joints for floors; partitions, not of metal, namely furniture partitions, movable office partitions; wall linings, not of metal, namely fabric wall coverings, wall covering adhesives; wall boards not of metal namely decorative wall plaques, fabric wall coverings, vinyl wall coverings, wall covering adhesives, wall hangings; roofing, not of metal, namely roofing felt, roofing panels, roofing paper, roofing shingles, roofing tiles; sound and vibration absorbing materials for building, namely plates; tiles, not of metal namely ceiling tiles, floor tiles, paving tiles, roofing tiles, wall tiles; staircases, stair treads (steps) and stringers (parts of staircases), not of metal; moldings, not of metal, for cornices and staircases; linings, not of metal, for building, namely roof coatings, anti-slip floor coating, linoleum flooring; stair treads (steps), not of metal; carpeting for stairs. Materials for covering existing floors, namely carpets, rugs, bath mats, floor mats, door mats; linoleum for use on floors and covering existing floors; wall hangings (non-textile); tapestry (wall hangings), not of textile; gymnastic mats; vinyl floor coverings; carpet underlay.

65.

COMPOSED ELEMENT

      
Numéro d'application IB2011051276
Numéro de publication 2011/151737
Statut Délivré - en vigueur
Date de dépôt 2011-03-25
Date de publication 2011-12-08
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Cappelle, Mark
  • Vanhastel, Luc
  • Blancke, Stefaan

Abrégé

Composed element comprising two or more panel-shaped elements (2), which each possess a coupling zone in which coupling parts (13-14) are present in the form of a profiled part respectively extending in the longitudinal direction of the coupling zone concerned, wherein these profiled parts allow coupling the panel- shaped elements (2) to each other in a locking manner and at angle, characterized in that the composed element (1) comprises auxiliary means (30), which assist in a correct mutual assembly of the panel-shaped elements (2).

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique

66.

COMPOSED ELEMENT AND CORNER CONNECTION APPLIED HEREWITH

      
Numéro d'application IB2011052240
Numéro de publication 2011/151758
Statut Délivré - en vigueur
Date de dépôt 2011-05-23
Date de publication 2011-12-08
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Cappelle, Mark
  • Deman, Luc

Abrégé

Composed element which comprises at least two panel-shaped elements (2), which, by means of a locking tongue and groove connection, can be coupled to each other at an angle, whether directly or indirectly by means of an intermediate piece, wherein said connection comprises, at least at one of the panel-shaped elements (2), a tongue (15) or groove (16), which can cooperate with a groove (16) or tongue (15) provided on the other panel-shaped element (2) or on the intermediate piece; wherein the tongue (15) consists of a split tongue (15), with, thus, at least a first part (21) and a second part (22), as well as a slit (23) located there between; and wherein at the outer side of at least said first part (21), a locking part (17) is present, characterized in that the slit (23), seen in cross-section of the tongue (15), comprises at least one side (24, 25), the course of which, seen in cross-section, deviates from the main direction (D1) belonging to the tongue (15).

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • F16B 12/12 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique

67.

UNILIN

      
Numéro d'application 154870000
Statut Enregistrée
Date de dépôt 2011-10-21
Date d'enregistrement 2014-09-19
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques
  • 20 - Meubles et produits décoratifs
  • 27 - Revêtements de sols et de murs
  • 37 - Services de construction; extraction minière; installation et réparation

Produits et services

(1) Packing, stopping and insulating materials, namely, insulating fabrics and packing material for forming seals and construction mastic adhesive for ceiling, wall and floor tiles, wood panels, sound absorbing flooring underlayment, insulation in the form of floor coverings. Building materials, not made of metal, namely interlocking planks, tiles and panels for floors, walls and ceilings, corner profiles and floor skirting boards not of metal for building purposes, wooden, laminate and composite fiber panels and plates, not of metal, for wall and ceiling coverings; floors, not of metal, namely vinyl floor coverings, laminate flooring, linoleum flooring, wood flooring, parquet flooring; boards, planks, tiles and panels for floors, walls and ceilings; all the aforesaid goods made out of wood or wood or fibre containing materials, or as laminates; underfloor mats made out of wood, fiber board or laminates; non-metal floor coverings namely floor boards and artificial parquet tiles; partitions, not of metal, namely furniture partitions, movable office partitions; wall linings, not of metal, for building, namely fabric wall coverings, wall covering adhesives; wall boards, not of metal, namely wooden, laminate, composite fiber and hardwood boards, polyethylene boards used as a wood substitute; insulating building materials, namely insulation materials; sound and vibration absorbing materials for building, namely boards and plates; roofing, not of metal, namely roofing felt, roofing panels, roofing paper, roofing shingles, roofing tiles; tiles, not of metal, namely floor tiles, roofing tiles, wall tiles, ceiling tiles; staircases, stair treads (steps) and stringers (parts of staircases), not of metal; moldings, not of metal, for cornices and staircases; wall linings, not of metal, for building, namely fabric wall coverings, wall covering adhesives; wallboards not of metal; stair treads (steps), not of metal. Furniture, namely bedroom furniture, computer furniture, dining room furniture, kitchen furniture, living room furniture, office furniture; furniture fittings not of metal; furniture shelves; furniture partitions of wood; furniture casters, not of metal; non-metal stair rods; linoleum for use on floors and for covering existing floors, vinyl for use on floors and for floor coverings. (1) Flooring and furniture repair and installation services; laying, repair and maintenance of floors and parquet flooring; tile laying; maintenance of furniture and upholstery; repairs, installation and maintenance of building boards and wall lining for building.

68.

QUICK-STEP

      
Numéro d'application 154033000
Statut Enregistrée
Date de dépôt 2011-08-19
Date d'enregistrement 2013-06-10
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 03 - Produits cosmétiques et préparations de toilette; préparations pour blanchir, nettoyer, polir et abraser.
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Floors, not of metal, namely parquet flooring, wood flooring, marble flooring, laminate flooring, linoleum flooring and vinyl flooring; wooden, laminate and composite fiber board panels and plates for floor coverings; wooden planks, boards, tiles and panels for floors, laminate planks, boards, tiles and panels for floors (2) Cleaning, polishing, scouring and abrasive preparations; preservatives for floor and furniture and floor and furniture cleaning preparations; parquet floor wax; floor wax removers; polishing floor wax. Building materials, not made of metal, namely interlocking planks, tiles and panels for floors, walls and ceilings, corner profiles and skirting boards; all the aforesaid goods made out of wood, fiber board and laminate; under floor mats made out of wood, fiber board and laminate; non-metal floor coverings namely floor boards and artificial parquet tiles; wall boards not of metal, namely wooden, laminate, composite fiber and hardwood boards, polyethylene boards used as a wood substitute; vinyl for use on floors and for floor coverings.

69.

DIDIT

      
Numéro d'application 152016900
Statut Enregistrée
Date de dépôt 2011-03-22
Date d'enregistrement 2014-03-19
Propriétaire UNILIN BVBA, a private limited liability company (Belgique)
Classes de Nice  ? 20 - Meubles et produits décoratifs

Produits et services

(1) Furniture partitions, not of metal; Furniture, namely bedroom furniture, computer furniture, dining room furniture, kitchen furniture, living room furniture, outdoor furniture, office furniture; furniture fittings, namely bedroom furniture parts, computer furniture parts, dining room furniture parts, kitchen furniture parts, living room furniture parts, outdoor furniture parts, office furniture parts; furniture shelves; furniture partitions of word; furniture casters, not of metal.

70.

BOARD MATERIAL, METHODS FOR MANUFACTURING BOARD MATERIAL AND PANEL WHICH CONTAINS SUCH BOARD MATERIAL.

      
Numéro d'application IB2010051667
Numéro de publication 2010/119431
Statut Délivré - en vigueur
Date de dépôt 2010-04-16
Date de publication 2010-10-21
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s) Coudenys, Geert

Abrégé

Board material of the type which substantially is composed of flax shives (2), which are bound by means of a thermo-hardening polycondensation glue, characterized in that said board material (1) comprises particulate filling material (4), which is situated at least among said flax shives (2), wherein this particulate filing material (4) comprises foamed particles of polystyrol or polystyrene, and that the bound flax shives (2) form a layer (3) situated centrally in the thickness (T) of the board material (1), whereas one or both surfaces (6) of the board material (1) are formed by a layer (5) comprising bound wood chips, wherein the average dimensions of the wood chips situated at one or both surfaces (6) are smaller than the average dimensions of the flax shives (2) situated centrally, and that said particulate filling material (4) is distributed homogenously or almost homogenously in the entire layer (3) formed by the flax shives (2).

Classes IPC  ?

  • B27N 3/00 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres
  • B27N 3/02 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres à partir de particules
  • B27N 3/14 - Distribution ou orientation des particules ou des fibres

71.

COMPOSED ELEMENT, MULTI -LAYERED BOARD AND PANEL-SHAPED ELEMENT FOR FORMING THIS COMPOSED ELEMENT

      
Numéro d'application IB2009054812
Numéro de publication 2010/070472
Statut Délivré - en vigueur
Date de dépôt 2009-10-29
Date de publication 2010-06-24
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Cappelle, Mark
  • Vanhastel, Luc
  • Deman, Luc
  • Van Hooydonck, Guy

Abrégé

Composed element comprising at least two panel-shaped elements (2-3), which each have an edge zone (4-5) in which coupling means (6-7) are present in the form of a profiled part (8-9) respectively extending in the longitudinal direction of the respective edge zone (4-5), as well as each comprise an end face (10-11) extending transversely to the respective edge zone (4-5), wherein said profiled parts (8-9) allow coupling the panel-shaped elements (2-3) together in an interlocking manner, characterized in that at least one of the panel-shaped elements (2-3) comprises means (12) which hide from view at least a portion of the profiled part (8-9) formed at the pertaining edge zone (4-5) at the location of the end face (10-11).

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • A47B 96/20 - Panneaux de meubles ou éléments de meubles similaires
  • F16B 12/26 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique utilisant des dispositifs à action rapide, p. ex. type bouton pression
  • B32B 21/00 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré

72.

COMPOSED ELEMENT, MULTI-LAYERED BOARD AND PANEL-SHAPED ELEMENT FOR FORMING THIS COMPOSED ELEMENT

      
Numéro d'application IB2009055816
Numéro de publication 2010/070605
Statut Délivré - en vigueur
Date de dépôt 2009-12-17
Date de publication 2010-06-24
Propriétaire UNILIN, BVBA (Belgique)
Inventeur(s)
  • Maertens, Luc
  • Cappelle, Mark
  • Vanhastel, Luc
  • Deman, Luc
  • Van Hooydonck, Guy

Abrégé

Composed element, wherein this composed element comprises at least two panel- shaped elements (2-3), which substantially are formed from a board material; wherein said panel-shaped elements (2-3) are interconnected at an angle by means of coupling means comprising a tongue (13) and a groove (14), which coupling means substantially are made as profiled parts in the board material; and wherein said coupling means also comprise locking elements (15-16), which, in coupled condition, prevent the moving apart of the tongue and groove, characterized in that the panel-shaped elements (2-3) are formed on the basis of board material in the form of particle board consisting of two or more layers, which layers, in respect to the average fineness of the particles, show a different degree of fineness, respectively a basic layer (138, 139) with coarser particles, more particularly chips, and at least one outer layer (136, 137), or at least a more outward-situated layer, which is of a finer composition than the composition of the basic layer (138, 139), in other words, with particles, chips, respectively, which on average are finer.

Classes IPC  ?

  • A47B 47/04 - Meubles à tiroirs, étagères ou rayonnages caractérisés par la possibilité de les démonter ou de les monter à partir d'éléments séparés principalement en bois ou en matière plastique
  • A47B 96/20 - Panneaux de meubles ou éléments de meubles similaires
  • F16B 12/26 - Jointure des meubles ou objets similaires, p. ex. masquée de l'extérieur par chevilles, boulons, tenons, brides, clips ou dispositifs similaires pour éléments de meubles non métalliques, p. ex. en bois, en matériau plastique utilisant des dispositifs à action rapide, p. ex. type bouton pression
  • B27N 3/02 - Fabrication d'objets sensiblement plats, p. ex. panneaux, à partir de particules ou de fibres à partir de particules
  • B32B 21/00 - Produits stratifiés composés essentiellement de bois, p. ex. une planche de bois, une feuille de placage, une feuille de bois aggloméré

73.

L2C

      
Numéro d'application 142317900
Statut Enregistrée
Date de dépôt 2008-12-29
Date d'enregistrement 2011-09-12
Propriétaire UNILIN B.V. (Belgique)
Classes de Nice  ?
  • 03 - Produits cosmétiques et préparations de toilette; préparations pour blanchir, nettoyer, polir et abraser.
  • 05 - Produits pharmaceutiques, vétérinaires et hygièniques
  • 11 - Appareils de contrôle de l'environnement
  • 16 - Papier, carton et produits en ces matières
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques
  • 20 - Meubles et produits décoratifs
  • 22 - Cordes; filets; tentes, auvents, voiles et sacs; matières de rembourrage
  • 27 - Revêtements de sols et de murs
  • 35 - Publicité; Affaires commerciales
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Floors (non-metallic), namely floors made from wood or from materials containing wood or fibres, (non-metallic building materials); non-metallic laminated floorings, planks for parquets, non-metallic sticks for panelling, non-metallic subfloors and blind floors; profiles and floor skirting boards (non-metallic building materials); non-metallic baseboards, rosettes as floor covering (non-metallic building materials), non-metallic building materials to be served as connection elements between different floor panels; carpets, rugs, mats and matting, linoleum; wall hangings (non-textile), namely pictures, frames, prints, print frames, mirrors, posters, picture lighting. (1) Scientific and technological services and research and design relating to non-metallic building materials used for flooring; industrial analysis and research services in the field of non-metallic building materials used for flooring.

74.

Incizo

      
Numéro d'application 131832900
Statut Enregistrée
Date de dépôt 2006-09-28
Date d'enregistrement 2009-05-15
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 06 - Métaux communs et minerais; objets en métal
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Metal building materials, namely, floor tiles, flooring, profiles for floors; metal finishing materials for floors and floor parts of metal, namely, skirtings, moldings, profiles, end profiles, expansion joints and transition profiles for building floors. (2) Non-metal floor panels; wooden panels, namely, wooden flooring panels, wooden wall panels, wooden roofing panels, wooden door panels, wooden fence panels; laminate floors not of metal; non-metal sub floors, namely, underlayments for floating floors; non-metal fibreboard, for use as building materials; non-metal laminate for use as building materials, namely, laminate flooring, laminate panels; building materials namely, non-metal profiles and transition profiles for floors; non-metal end profiles and non-metal expansion profiles for use as building materials, non-metal skirtings for use as building materials; non-metal finishing materials for floors, namely, non-metal floor tiles, laminate flooring, floor panels, parquet flooring, veneer for floors; non-metal floor parts, namely, floor boards of wood, plastic floor boards, floor panels, veneer for floors. (3) Carpets, floor mats, mats for covering existing floors, linoleum for use on floors and floor coverings.

75.

PERGO

      
Numéro d'application 124662000
Statut Enregistrée
Date de dépôt 2005-02-09
Date d'enregistrement 2007-05-24
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Floor material namely clinker slabs, clinker tiles, ceramic slabs and ceramic tiles; wood flooring and parquet wood flooring; clinker slabs, clinker tiles, ceramic slabs and ceramic tiles as floor covering material; wood flooring and parquet wood flooring for covering existing floor. (2) Carpets, rugs, mats and matting.

76.

SOFTSEAL

      
Numéro d'application 088319500
Statut Enregistrée
Date de dépôt 1998-07-03
Date d'enregistrement 2000-08-31
Propriétaire Unilin BVBA (Belgique)
Classes de Nice  ?
  • 16 - Papier, carton et produits en ces matières
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques

Produits et services

(1) Acoustic insulating materials in the form of sheets or rolls; foam plastic material in the form of a roll; polyethylene film; base sheet for floor covering; soundproofing building panels of plastic material for floor covering; framework soundproofing building panels of plastic material for floors; framework sound damping base for floor; floor covering material consisting of a thermosetting laminate or a thermoplastic laminate and any of these laminates bonded to a base of particle board, fiber board or an insulating sheet.

77.

WHISPERWALK

      
Numéro d'application 088045000
Statut Enregistrée
Date de dépôt 1998-06-04
Date d'enregistrement 2000-02-15
Propriétaire Unilin B.V. (Belgique)
Classes de Nice  ?
  • 16 - Papier, carton et produits en ces matières
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques

Produits et services

(1) Plastic film and plastic sheets as sound damping floor covering material; sound damping floor covering materials, namely rolls and sheets of natural fibres or cellular plastics; particle boards and fibre boards; floor covering material consisting of a thermosetting laminate or a thermoplastic laminate and any of these laminates bonded to a base of particle board, fiber board or an insulating sheet.

78.

STEPS

      
Numéro d'application 082732100
Statut Enregistrée
Date de dépôt 1996-10-29
Date d'enregistrement 2000-05-25
Propriétaire Unilin BVBA (Belgique)
Classes de Nice  ?
  • 17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
  • 19 - Matériaux de construction non métalliques

Produits et services

(1) Boards, tiles and parquet panels for floors, walls and for paneling, all goods made out of wood or of materials containing wood, fibers, or laminates, flooring underlayments made of wood, fiber board or laminates, profiles and floor skirting boards made of wood or plastic.

79.

MARVELLA

      
Numéro d'application 074737000
Statut Enregistrée
Date de dépôt 1994-02-14
Date d'enregistrement 1998-02-16
Propriétaire Unilin BVBA (Belgique)
Classes de Nice  ?
  • 19 - Matériaux de construction non métalliques
  • 27 - Revêtements de sols et de murs

Produits et services

(1) Floor boards of thermosetting laminate bonded to a base of particle board or fibreboard, floor covering materials consisting of thermosetting laminate bonded to a base of particle board or fibreboard. (2) Floor boards and parquet floor boards of wood or thermosetting laminate bonded to a base of particle board or fibreboard.

80.

QUICK-STEP

      
Numéro de série 74428062
Statut Enregistrée
Date de dépôt 1993-08-24
Date d'enregistrement 1995-07-11
Propriétaire UNILIN BVBA (Belgique)
Classes de Nice  ? 27 - Revêtements de sols et de murs

Produits et services

fiberboard plank flooring for covering existing floors