A tie bar fabricate from extruded or formed polymer material available in bulk rolls, and methods of fabrication for a tie bar assembly. The tie bar is custom cut from the bulk material to any desired length at a window assembly line, and is cut with saddles and apertures that match the locations of window locking points and drive locations to conform with window designs on the fly. Standard locking points and drive pins are fitted onto the tie bar in locations as needed to fit particular configurations, and are slidable in standard c-shaped channels. The polymer material used for the tie bar is flexible and resilient, thereby lending itself to use for rounded window designs, without having any specific preformed length, locking point location, or shape.
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
E05C 9/18 - Parties constitutives des moyens d'immobilisation de fermeture ou des moyens fixes de retenue pour les extrémités de barres
E05C 9/22 - Moyens de guidage pour barres, tringles ou câbles coulissants
A tie bar fabricated fiom extruded or formed polymer material available in bulk rolls, and methods of fabrication for a tie bar assembly. The tie bar is custom cut from the bulk material to any desired length at a window assembly line, and is cut with saddles and apertures that match the locations of window locking points and drive locations to conform with window designs on the fly. Standard locking points and drive pins are fitted onto the tie bar in locations as needed to fit particular configurations, and are slidable in standard c-shaped channels. The polymer material used for the tie bar is flexible and resilient, thereby lending itself to use for rounded window designs, without having any specific preformed length, locking point location, or shape.
A window operator handle and cover with magnetic features that enable the handle to be retained to the cover in a folded position. The handle can have a detent mechanism to retain the handle in an unfolded position. The operator cover can also be attached to the operator with magnets.
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
E05F 11/22 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant consistant en un levier, p. ex. un levier à angle, et plusieurs organes intermédiaires supplémentaires en série
5.
Window operator handle and cover with magnetic securing features
A window operator handle and cover with magnetic features that enable the handle to be retained to the cover in a folded position. The operator cover can also be attached to the operator with magnets.
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
E05F 11/22 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant consistant en un levier, p. ex. un levier à angle, et plusieurs organes intermédiaires supplémentaires en série
6.
WINDOW OPERATOR HANDLE AND COVER WITH MAGNETIC SECURING FEATURES
A window operator handle and cover with magnetic features that enable the handle to be retained to the cover in a folded position. The operator cover can also be attached to the operator with magnets.
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
E05F 11/24 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot qui se déplacent dans un plan parallèle à l'axe du pivot du battant
E05F 11/34 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à mécanismes à vis
A casement window lock and tie bar assembly including a flexible guide pre-formed with an arcuate deflection. The guide receives a tie bar having a c-shaped cross-section. The arcuate deflection of the guide causes the guide to be frictionally held in an initial position on the longitudinal axis of tie bar. When fasteners are tightened to attach the guide to a window frame, the guide is flattened to enable the tie bar to freely slide on the guide.
E05C 9/22 - Moyens de guidage pour barres, tringles ou câbles coulissants
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
A casement window lock and tie bar assembly including a flexible guide pre-formed with an arcuate deflection. The guide receives a tie bar having a c-shaped cross-section. The arcuate deflection of the guide causes the guide to be frictionally held in an initial position on the longitudinal axis of tie bar. When fasteners are tightened to attach the guide to a window frame, the guide is flattened to enable the tie bar to freely slide on the guide.
E05C 17/04 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant
A tie bar and guide assembly for casement windows having a roll form tie bar that snaps on to the tie bar guide without extending through it. The tie bar has locating openings that engage tabs on the tie bar guide to locate and secure the guide prior to installation. The tabs are depressed and disengaged when fasteners are used to secure the tie bar assembly to the window frame. The tie bar can include rivet locking points located close to the top and bottom of the tie bar to provide better security and increased stability for preventing water and air infiltration. The rivet locking points can be adjustable to optimize the fit of the window sash within the frame. The snap-on design reduces the overall height of the tie bar assembly thereby enabling a closer fit of the sash within the frame and reducing the required width of the window frame needed to accommodate the locking mechanism.
E05C 9/20 - Moyens d'accouplement pour barres, tringles ou câbles coulissants
E05C 1/00 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne
E05C 9/00 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
E05C 9/22 - Moyens de guidage pour barres, tringles ou câbles coulissants
A tie bar and guide assembly for casement windows having a roll form tie bar that snaps on to the tie bar guide without extending through it. The tie bar has locating openings that engage tabs on the tie bar guide to locate and secure the guide prior to installation. The tabs are depressed and disengaged when fasteners are used to secure the tie bar assembly to the window frame. The tie bar can include rivet locking points located close to the top and bottom of the tie bar to provide better security and increased stability for preventing water and air infiltration. The rivet locking points can be adjustable to optimize the fit of the window sash within the frame. The snap-on design reduces the overall height of the tie bar assembly thereby enabling a closer fit of the sash within the frame and reducing the required width of the window frame needed to accommodate the locking mechanism.
E05C 17/04 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant
E05F 11/08 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à barres à déplacement longitudinal guidées par des organes intermédiaires à pivot, dans ou sur le dormant
13.
Tamper resistant sash opening limiter for casement and awning windows
A sash limiter assembly for limiting the distance a casement window can be opened. In a jamb mounted version, the limiter is mounted in one constant location on the jamb rather than multiple locations on the sill which results in the opening distance being essentially the same for all window widths and all hinge types. In both the jamb mounted version and a sill mounted version, a hexalobular or other security screw can be used to retain a limiting arm to a stud attached to a bracket, or a stud attached to a slider which slides on a track to inhibit unauthorized removal of the limiter arm.
E05C 17/16 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique ne pivotant qu'à une extrémité et ayant une entaille allongée
E05C 17/28 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique pivotant à une extrémité, l'autre extrémité se déplaçant le long d'une pièce de guidage avec des dispositifs de freinage, de serrage ou de blocage au point de contact de la pièce de guidage
E05C 17/24 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique pivotant à une extrémité, l'autre extrémité se déplaçant le long d'une pièce de guidage
14.
TAMPER RESISTANT SASH OPENING LIMITER FOR CASEMENT AND AWNING WINDOWS
A sash limiter assembly for limiting the distance a casement window can be opened. In a jamb mounted version, the limiter is mounted in one constant location on the jamb rather than multiple locations on the sill which results in the opening distance being essentially the same for all window widths and all hinge types. In both the jamb mounted version and a sill mounted version, a hexalobular or other security screw can be used to retain a limiting arm to a stud attached to a bracket, or a stud attached to a slider which slides on a track to inhibit unauthorized removal of the limiter arm.
E05C 17/12 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique
E05F 11/08 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à barres à déplacement longitudinal guidées par des organes intermédiaires à pivot, dans ou sur le dormant
A casement window opening control device including a sash sub-assembly and a frame sub-assembly. The device is self-locating by aligning the bottom end of each sub-assembly with physical features of the window. This saves time and effort in installation by not requiring any measurements to ensure that an engaging feature of the limiting arm of the device is aligned with an engaging feature of the frame sub-assembly so that the device properly reengages upon closing of the sash after release. Also, operation of the release of the travel limiting arm is intuitive, requiring only pressing in on a latch button and sliding it upwardly to effect release.
E05C 17/08 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant avec moyens particuliers de libération, p. ex. une libération automatique du fait que l'on continue à ouvrir
E05C 17/24 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique pivotant à une extrémité, l'autre extrémité se déplaçant le long d'une pièce de guidage
E05D 11/10 - Dispositifs empêchant le mouvement entre éléments de charnières ou de gonds relativement mobiles
E06B 3/32 - Aménagements des battants caractérisés par le genre de mouvementAménagements des battants modèles dans les ouverturesCaractéristiques des battants ou châssis ayant trait uniquement au genre de mouvement du battant
E06B 3/36 - Aménagements des battants caractérisés par le genre de mouvementAménagements des battants modèles dans les ouverturesCaractéristiques des battants ou châssis ayant trait uniquement au genre de mouvement du battant pour un seul genre de mouvement avec un axe de rotation vertical unique sur l'un des côtés de l'ouverture, ou tournant dans l'ouverture
A casement window opening control device including a sash sub-assembly and a frame sub-assembly. The device is self-locating by aligning the bottom end of each sub-assembly with physical features of the window. This saves time and effort in installation by not requiring any measurements to ensure that an engaging feature of the limiting arm of the device is aligned with an engaging feature of the frame sub-assembly so that the device properly reengages upon closing of the sash after release. Also, operation of the release of the travel limiting arm is intuitive, requiring only pressing in on a latch button and sliding it upwardly to effect release.
E05C 17/16 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique ne pivotant qu'à une extrémité et ayant une entaille allongée
E05D 11/06 - Dispositifs limitant le mouvement d'ouverture de charnières ou de gonds
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
19.
Integrated casement window operator and lock with anti-backdrive feature
An integrated casement window operator and lock, including a gear mechanism and an arm assembly, the arm defining a rack portion and an adjacent arcuate gear portion, the arm mounted to the housing with a pinion gear engaged with the rack portion and the arcuate gear portion, the pinion gear defining a star-shaped aperture therethrough and a handle with a square-shaped shaft portion received in the star-shaped aperture of the gear. The handle is selectively rotatable to shift the arm between a window fully closed position and a window fully open position, wherein an anti-backdrive mechanism is provided to inhibit backdriving of the arm in both the window fully closed window fully open positions.
E05F 11/24 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot qui se déplacent dans un plan parallèle à l'axe du pivot du battant
E05F 11/14 - Mécanismes par lesquels la barre déplace le battant directement sans intermédiaire, p. ex. par crémaillère et engrenage ou broche et encoche
20.
INTEGRATED CASEMENT WINDOW OPERATOR AND LOCK WITH ANTI-BACKDRIVE FEATURE
An integrated casement window operator and lock, including a gear mechanism and an arm assembly, the arm defining a rack portion and an adjacent arcuate gear portion, the arm mounted to the housing with a pinion gear engaged with the rack portion and the arcuate gear portion, the pinion gear defining a star-shaped aperture therethrough and a handle with a square-shaped shaft portion received in the star-shaped aperture of the gear. The handle is selectively rotatable to shift the arm between a window fully closed position and a window fully open position, wherein an anti-backdrive mechanism is provided to inhibit backdriving of the arm in both the window fully closed window fully open positions
E05F 11/10 - Mécanismes par lesquels une poignée actionne la barre
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
E05F 11/24 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot qui se déplacent dans un plan parallèle à l'axe du pivot du battant
21.
FOLDING WINDOW HANDLE AND OPERATOR COVER (RIGHT) DESIGN
An integrated casement window operator and lock mechanism including an arm shiftable with a lever handle between a first position of the lever handle wherein the window is closed and the sash is locked to the frame with a hook defined in an arm of the operator and lock mechanism, a second position wherein the hook is disengaged so as to unlock the sash from the frame, and a third position wherein the arm is pivoted outward to move the sash out of the frame, thereby opening the window.
E05F 11/14 - Mécanismes par lesquels la barre déplace le battant directement sans intermédiaire, p. ex. par crémaillère et engrenage ou broche et encoche
E05F 11/12 - Mécanismes par lesquels la barre déplace le battant
E05C 9/14 - Mécanismes actionnant les barres avec broches s'enclenchant dans des entailles
E05C 1/12 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche
E05F 11/10 - Mécanismes par lesquels une poignée actionne la barre
E05C 17/04 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant
E05C 9/12 - Mécanismes actionnant les barres avec engrenages et crémaillères
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
20 - Meubles et produits décoratifs
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Window and door hardware made primarily of metal, namely,
operators, locks, tracks, brackets, handles, cranks, knobs,
hinges, leversets, rollers, pulls, sash lifts, latches,
pivot bars, push-bar operators, vent stops, snubbers, strike
plates, corner keys, keepers, foot bolts, header bolts,
limit devices, support arms, casement operators, door handle
set kits comprising metal handles, hinges, locks, and
latches, doorknobs, door bolts; metal nailing fins and metal
window balance assemblies, and metal channels for sliding
screen frames, for glazing and for pile weather stripping. Electrically controlled window operators, namely, motorized
window operators for casement, awning and skylight window
systems; hydraulic door openers and closers; pneumatic door
openers and closers; motorized cranks for opening and
closing doors, windows, and skylights. High strength polymers and thermoplastics used in the
manufacture of window and door hardware; thermoplastic
profile extrusions used in the fenestration industry; home
insulation products, namely, non-metal weather-stripping,
weather seals, gaskets, and door sweeps for use in
buildings; weather-stripping sealants, non-metal trim
strips, and weather seals, extrusions used for manufacture
of doors and windows; thermoformable electrically conductive
polymer sheeting for use in attenuating transmission of
electromagnetic interference and radio frequency
interference, namely, foam materials for use in
electromagnetic interference shielding gaskets,
radio-frequency shielding gaskets and trim strip, and
gaskets, namely, electromagnetic interference shielding
gaskets and radio-frequency interference shielding gaskets;
insulating material, namely, fabric, tape, or film that is
metalized or plated with metal; closed cell thermoplastic
elastomer foam in sheet or strip form having thermal sealing
properties for use in the manufacture of weather-stripping
and weather seals; fire-retardant foam weather-stripping for
use in homes and buildings. Non-metallic window hardware, namely, tilt latches, hand
operated window locks, and balance assemblies, namely,
plastic parts and fittings for window balance assemblies,
and non-metal jambliners for single-hung and double-hung
windows; non-metal door handles, locks, and latches; wood or
plastic door handles, nonmetal door bolts, and nonmetal
latches for doors; non-metal door and window hardware,
namely, rollers, bumpers, tilt latches, corner keys and
keepers, non-metal hinges, non-metal adjustable door hinges;
window balance assemblies, namely, plastic parts and
fittings for window balance assemblies, and non-metal
jambliners; non-metal nailing fins, and custom profile
extrusions used for non-metal gaskets, jambliners, headers,
interlocks, sill tracks, glazing beads, and parting stops;
non-metal adjustable door hinges. Custom manufacture of molds; applying protective and
decorative coatings to metal and plastic products.
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
19 - Matériaux de construction non métalliques
20 - Meubles et produits décoratifs
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, leversets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts; metal nailing fins and metal window balance assemblies, and metal channels for sliding screen frames, for glazing and for pile weather stripping
(2) Electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights
(3) High strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; home insulation products, namely, non-metal weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings
(4) Window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; non-metal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges
(5) Non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, nonmetal door bolts, and nonmetal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges (1) Custom manufacture of molds for construction materials, window hardware and door hardware; applying protective and decorative coatings to metal and plastic products, namely construction materials, window hardware and door hardware.
30.
Self locating tie bar guide for sash lock tie bars
A self locating tie bar guide for use with a tie bar. The tie bar guide defines a passage into which the tie bar is received. A tie bar receiving portion is shiftable between an open orientation in which the tie bar can be inserted into the passage and a closed orientation in which the tie bar is held in the passage. A resilient engaging member that engages a prelocated opening in the tie bar is resiliently biased toward the tie bar when the receiving portion is in the open orientation. The resilient tie bar engaging member is shiftable away from the tie bar when the receiving portion is in the closed orientation by contact between a portion of the resilient engaging member and another portion of the tie bar guide.
A lock for a window which includes a body including a channel defined in an interior of the body, an actuator element configured to be received in the channel and slidable therein, the actuator element including a fork portion to operably couple with a tie bar assembly for locking the window, a handle pivotally coupled to the actuator element, and a linkage pivotally coupled between the body and an intermediate point on the handle. The handle is movable between a closed position and an open position, with movement of the handle causing the actuator element to slide within the channel in a direction opposite the direction of movement of the handle.
E05B 3/00 - Fixation des poignées aux pièces de la serrure ou de la clenche
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
E05B 63/00 - Serrures à caractéristiques structurales particulières
E05C 9/18 - Parties constitutives des moyens d'immobilisation de fermeture ou des moyens fixes de retenue pour les extrémités de barres
E05B 1/00 - Boutons ou poignées pour battantsBoutons, poignées ou boutons à pression pour serrures ou clenches sur battants
A lock for a window which includes a body including a channel defined in an interior of the body, an actuator element configured to be received in the channel and slidable therein, the actuator element including a fork portion to operably couple with a tie bar assembly for locking the window, a handle pivotally coupled to the actuator element, and a linkage pivotally coupled between the body and an intermediate point on the handle. The handle is movable between a closed position and an open position, with movement of the handle causing the actuator element to slide within the channel in a direction opposite the direction of movement of the handle.
E05C 1/06 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne sans action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
A hinge for coupling a movable element to a frame that defines an opening that receives the movable element. The hinge includes a frame interface assembly adapted to attach to the frame at one or more attachment points. The frame interface assembly includes a frame leaf and a sealing member, the frame leaf defines a mounting face adapted to abut an exterior surface of the frame and a plurality of spaced apart knuckles. The sealing member defines an attachment point liquid barrier sealing face abutting an interior surface of the frame opposite the mounting face. The hinge further includes a sash leaf adapted to attach to the window sash, with the sash leaf defining one or more knuckles, and a pin assembly including a hinge pin extending through the knuckles of the frame leaf and the knuckles of the sash leaf to couple the frame leaf and the sash leaf.
A hinge for coupling a movable element to a frame that defines an opening that receives the movable element. The hinge includes a frame interface assembly adapted to attach to the frame at one or more attachment points. The frame interface assembly includes a frame leaf and a sealing member, the frame leaf defines a mounting face adapted to abut an exterior surface of the frame and a plurality of spaced apart knuckles. The sealing member defines an attachment point liquid barrier sealing face abutting an interior surface of the frame opposite the mounting face. The hinge further includes a sash leaf adapted to attach to the window sash, with the sash leaf defining one or more knuckles, and a pin assembly including a hinge pin extending through the knuckles of the frame leaf and the knuckles of the sash leaf to couple the frame leaf and the sash leaf.
An apparatus has a housing adapted to be secured to a window sash. A cam rotatably mounted in the housing has a cam surface and a cam boss disposed opposite the cam surface. A drive disc rotatably mounted proximate the cam has a disc boss and a projection disposed opposite the disc boss. The cam boss and disc boss are selectively engageable when the cam is rotated.
E05C 1/12 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
E05C 3/04 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative sans action d'une clenche avec poignée de manœuvre ou organe équivalent fixé rigidement au pêne
E05C 7/00 - Dispositifs d'immobilisation spécialement conçus pour deux battants
A low profile lock actuator assembly for locking, sliding doors, which can be provided in combination with a lock assembly or retrofitted to mate with an existing lock assembly. The lock actuator assembly includes an interior component and an exterior component, which are each coupled to an actuating assembly. The lock actuator assembly includes recessed or otherwise low profile handles.
A low profile lock actuator assembly for locking, sliding doors, which can be provided in combination with a lock assembly or retrofitted to mate with an existing lock assembly. The lock actuator assembly includes an interior component and an exterior component, which are each coupled to an actuating assembly. The lock actuator assembly includes recessed or otherwise low profile handles.
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
19 - Matériaux de construction non métalliques
20 - Meubles et produits décoratifs
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Window and door hardware made primarily of metal, namely,
operators, locks, tracks, brackets, handles, cranks, knobs,
hinges, leversets, rollers, pulls, sash lifts, latches,
pivot bars, push-bar operators, vent stops, snubbers, strike
plates, corner keys, keepers, foot bolts, header bolts,
limit devices, support arms, casement operators, door handle
set kits comprising metal handles, hinges, locks, and
latches, doorknobs, door bolts; nailing fins and window
balance assemblies, channels for sliding screen frames, for
glazing and for pile weather stripping. Electrically controlled window operators, namely, motorized
window operators for casement, awning and skylight window
systems; hydraulic door openers and closers; pneumatic door
openers and closers; motorized cranks for opening and
closing doors, windows, and skylights. High strength polymers and thermoplastics used in the
manufacture of window and door hardware; thermoplastic
profile extrusions used in the fenestration industry;
weather-stripping, weather seals, gaskets, and door sweeps
for use in buildings; weather-stripping sealants, non-metal
trim strips, and weather seals, extrusions used for
manufacture of doors and windows; thermoformable
electrically conductive polymer sheeting for use in
attenuating transmission of electromagnetic interference and
radio frequency interference, namely, foam materials for use
in electromagnetic interference shielding gaskets,
radio-frequency shielding gaskets and trim strip, and
gaskets, namely, electromagnetic interference shielding
gaskets and radio-frequency interference shielding gaskets;
insulating material, namely, fabric, tape, or film that is
metalized or plated with metal; closed cell thermoplastic
elastomer foam in sheet or strip form having thermal sealing
properties for use in the manufacture of weather-stripping
and weather seals; and fire-retardant foam weather-stripping
for use in homes and buildings. Window balance assemblies, namely, plastic parts and
fittings for window balance assemblies, and non-metal jamb
liners; non-metal nailing fins, and custom profile
extrusions used for non-metal gaskets, jamb liners, headers,
interlocks, sill tracks, glazing beads, and parting stops;
non-metal adjustable door hinges. Non-metallic window hardware, namely, tilt latches, hand
operated window locks, and balance assemblies, namely,
plastic parts and fittings for window balance assemblies,
and non-metal jamb liners for single-hung and double-hung
windows; non-metal door handles, locks, and latches; wood or
plastic door handles, nonmetal door bolts, and nonmetal
latches for doors; non-metal door and window hardware,
namely, rollers, bumpers, tilt latches, corner keys and
keepers, non-metal hinges, non-metal adjustable door hinges. Custom manufacture of molds; applying protective and
decorative coatings to metal and plastic products.
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
19 - Matériaux de construction non métalliques
20 - Meubles et produits décoratifs
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, leversets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts; metal nailing fins and metal window balance assemblies, and metal channels for sliding screen frames, for glazing and for pile weather stripping Electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights High strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; home insulation products, namely, non-metal weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings Window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; non-metal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges Non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, nonmetal door bolts, and nonmetal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges Custom manufacture of molds; applying protective and decorative coatings to metal and plastic products
A key lockable window operator, including a crank handle that is shiftable between a folded storage position and an unfolded operating position and a lock cylinder operably engaged to a rack and a sliding pin. The rack and the sliding pin are shiftable between an unlocked position and a locked position. When in the locked position, at least a portion of the sliding pin is engaged into a cavity in the crank handle whereby the crank handle is secured in the folded storage position.
E05F 11/10 - Mécanismes par lesquels une poignée actionne la barre
E05F 11/34 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à mécanismes à vis
E05B 13/00 - Dispositifs empêchant l'utilisation de la clé, de la poignée ou des deux
E05B 17/04 - Dispositifs d'accouplement du cylindre tournant d'une serrure cylindrique simple ou double avec la pièce commandant le pêne
E05F 9/00 - Moyens pour la manœuvre des battants par tringles à commande manuelle non guidées dans ou sur le dormant, y compris ceux qui commandent aussi leur immobilisation
E05F 11/32 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à barres rotatives guidées dans le dormant
(1) Window hardware made primarily of metal designed for use in the manufacture of windows, namely, window operators, window lever sets, window locks, window latches, window tracks, window brackets, window hinges, window knobs, and window handles.
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
20 - Meubles et produits décoratifs
37 - Services de construction; extraction minière; installation et réparation
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, leversets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; nailing fins and window balance assemblies, channels for sliding screen frames, for glazing and for pile weather-stripping; electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights; high strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio-frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings; window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; nonmetal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges; non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, nonmetal door bolts, and nonmetal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges (1) Custom manufacture of molds; applying protective and decorative coatings to metal and plastic products
51.
AT AMESBURY TRUTH ENGINEERED SOLUTIONS. TRUSTED RESULTS.
01 - Produits chimiques destinés à l'industrie, aux sciences ainsi qu'à l'agriculture
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
20 - Meubles et produits décoratifs
37 - Services de construction; extraction minière; installation et réparation
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
(1) Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, lever sets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; nailing fins and window balance assemblies, channels for sliding screen frames, for glazing and for pile weather-stripping; electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights; high strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio-frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings; window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; non-metal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges; non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, non-metal door bolts, and non-metal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges (1) Custom manufacture of molds; applying protective and decorative coatings to metal and plastic products
A device to limit an opening of a window having a sash selectively movable between a window closed position in which the sash is received in a window frame, and a window open position in which the sash is pivoted outwardly relative to the window frame. The device includes a sash bracket, a limiting arm assembly with an engagement structure, and a securing structure with a selectively operable release mechanism. The securing structure receives the engagement structure of the limiting arm assembly so that the limiting arm inhibits pivoting of the sash toward the window open position beyond a distance of travel defined by a length of the limiting arm, and the engagement structure is releasable from the securing structure by operating the release mechanism so that the sash can be further pivoted toward the window open position beyond the distance of travel.
E05C 17/32 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en plusieurs tringles pivotantes
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
E05C 17/24 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique pivotant à une extrémité, l'autre extrémité se déplaçant le long d'une pièce de guidage
E05F 1/10 - Appareils de fermeture ou d'ouverture pour battants, non prévus ailleurs dans la présente sous-classe actionnés par ressort pour battants pivotants
E05F 1/00 - Appareils de fermeture ou d'ouverture pour battants, non prévus ailleurs dans la présente sous-classe
E05C 17/16 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique ne pivotant qu'à une extrémité et ayant une entaille allongée
E05C 17/30 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant de structure extensible, p. ex. télescopique
E05D 11/06 - Dispositifs limitant le mouvement d'ouverture de charnières ou de gonds
E05D 15/30 - Suspensions pour battants portés sur des bras mobiles dans un plan horizontal à bras pivotants et guides coulissants
A key lockable window operator, including a crank handle that is shiftable between a folded storage position and an unfolded operating position and a lock cylinder operably engaged to a rack and a sliding pin. The rack and the sliding pin are shiftable between an unlocked position and a locked position. When in the locked position, at least a portion of the sliding pin is engaged into a cavity in the crank handle whereby the crank handle is secured in the folded storage position.
E05F 11/10 - Mécanismes par lesquels une poignée actionne la barre
E05F 11/34 - Mécanismes actionnés par l'homme pour la manœuvre des battants, y compris ceux qui commandent aussi leur immobilisation pour battants en général, p. ex. vasistas à mécanismes à vis
A window lock assembly accomplishing FER manipulation protection against unintended window opening without using additional components in the typical FER lock assembly by using a passive barrier system to help prevent access to both the lock cam and lock lever handle. The device can include at least one lock assembly mounted on the interior side of the window's inner sash and having a locked and unlocked position. The lock assembly engages with at least one keeper mounted on the outer sash to secure the window. The lock assembly housing has a barrier extending outward from the bottom surface which effectively helps to block access to the cam. The lock assembly housing also has a shroud which extends from the top and side edges which partially or completely covers the keeper and effectively helps to block access to the lever handle.
E05B 17/20 - Moyens indépendants du mécanisme de verrouillage pour empêcher une ouverture non autorisée, p. ex. pour bloquer le pêne en position de fermeture
E05C 3/04 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative sans action d'une clenche avec poignée de manœuvre ou organe équivalent fixé rigidement au pêne
E05B 15/02 - GâchesPlatinesPênes-cramponsÉcussons de serrures
A lock system for casement or awning windows. The lock system includes a keeper and a tie bar with a rivet assembly rotatably attached thereto. The rivet assembly includes a rivet and a sleeve rotationally fixed to the rivet, the rivet and the sleeve having longitudinal axes parallel to but offset from each other.
E05C 1/06 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne sans action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement
E05C 3/12 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche
E05C 3/00 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative
56.
AT AMESBURY TRUTH ENGINEERED SOLUTIONS.TRUSTED RESULTS.
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
06 - Métaux communs et minerais; objets en métal
07 - Machines et machines-outils
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
19 - Matériaux de construction non métalliques
20 - Meubles et produits décoratifs
Produits et services
Custom manufacture of molds; applying protective and decorative coatings to metal and plastic products Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, leversets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; metal nailing fins and metal window balance assemblies, and metal channels for sliding screen frames, for glazing and for pile weather stripping Electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights High strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; home insulation products, namely, non-metal weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings Window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; non-metal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges Non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, nonmetal door bolts, and nonmetal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges
17 - Produits en caoutchouc ou en matières plastiques; matières à calfeutrer et à isoler
19 - Matériaux de construction non métalliques
20 - Meubles et produits décoratifs
40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
Produits et services
Window and door hardware made primarily of metal, namely, operators, locks, tracks, brackets, handles, cranks, knobs, hinges, leversets, rollers, pulls, sash lifts, latches, pivot bars, push-bar operators, vent stops, snubbers, strike plates, corner keys, keepers, foot bolts, header bolts, limit devices, support arms, casement operators, door handle set kits comprising metal handles, hinges, locks, and latches, doorknobs, door bolts, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; metal nailing fins and metal window balance assemblies, and metal channels for sliding screen frames, for glazing and for pile weather stripping Electrically controlled window operators, namely, motorized window operators for casement, awning and skylight window systems; hydraulic door openers and closers; pneumatic door openers and closers; motorized cranks for opening and closing doors, windows, and skylights High strength polymers and thermoplastics used in the manufacture of window and door hardware; thermoplastic profile extrusions used in the fenestration industry; home insulation products, namely, non-metal weather-stripping, weather seals, gaskets, and door sweeps for use in buildings; weather-stripping sealants, non-metal trim strips, and weather seals, extrusions used for manufacture of doors and windows; thermoformable electrically conductive polymer sheeting for use in attenuating transmission of electromagnetic interference and radio frequency interference, namely, foam materials for use in electromagnetic interference shielding gaskets, radio-frequency shielding gaskets and trim strip, and gaskets, namely, electromagnetic interference shielding gaskets and radio-frequency interference shielding gaskets; insulating material, namely, fabric, tape, or film that is metalized or plated with metal; closed cell thermoplastic elastomer foam in sheet or strip form having thermal sealing properties for use in the manufacture of weather-stripping and weather seals; and fire-retardant foam weather-stripping for use in homes and buildings Window balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners; non-metal nailing fins, and custom profile extrusions used for non-metal gaskets, jambliners, headers, interlocks, sill tracks, glazing beads, and parting stops; non-metal adjustable door hinges Non-metallic window hardware, namely, tilt latches, hand operated window locks, and balance assemblies, namely, plastic parts and fittings for window balance assemblies, and non-metal jambliners for single-hung and double-hung windows; non-metal door handles, locks, and latches; wood or plastic door handles, nonmetal door bolts, and nonmetal latches for doors; non-metal door and window hardware, namely, rollers, bumpers, tilt latches, corner keys and keepers, non-metal hinges, non-metal adjustable door hinges [ Custom manufacture of molds; applying protective and decorative coatings to metal and plastic products ]
58.
Low profile high performance casement and awning window keeper
A locking mechanism for use with a window having a hinge coupling a sash to a frame includes a keeper and a locking lug. The keeper includes a generally planar base plate that is abutable to a surface of either the sash or the frame and two wings extending upwardly from the base, each of the wings having an upwardly and inwardly extending portion extending from the base plate and an inwardly extending portion extending inwardly substantially parallel to the base plate from the upwardly and inwardly extending portion. The two inwardly extending portions define a gap therebetween. The planar base further includes at least one self locating leg extending outward and coplanar with the base. The self locating leg adapted to abut a portion of the sash or the frame. Thus, the keeper is positionable without a fixture.
A multipoint mortise lock mechanism for a swinging door, including a central cassette assembly operably coupled to an upper remote locking point assembly and a lower remote locking point assembly by a remote locking linkage. The central cassette assembly includes a housing, a deadbolt mechanism, a latchbolt mechanism, a remote locking point mechanism and an anti-slam mechanism. The anti-slam mechanism includes an anti-slam plunger that when in an extended position engages the remote locking linkage via a boss and a slot and thereby inhibits movement of the remote locking linkage whereby deployment of the remote locking point assemblies is prevented. The deadbolt mechanism includes a deadbolt extendible from the central cassette that is independently operable from the remote locking point mechanism. The deadbolt mechanism further includes an anti-back drive mechanism.
E05C 9/00 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant
E05C 9/04 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées en directions opposées lors de l'immobilisation ou de la libération
E05B 63/18 - Serrures à caractéristiques structurales particulières avec dispositions indépendantes du mécanisme de verrouillage pour maintenir le pêne en position de retrait
E05C 9/18 - Parties constitutives des moyens d'immobilisation de fermeture ou des moyens fixes de retenue pour les extrémités de barres
E05B 17/20 - Moyens indépendants du mécanisme de verrouillage pour empêcher une ouverture non autorisée, p. ex. pour bloquer le pêne en position de fermeture
E05C 1/04 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne sans action d'une clenche avec poignée de manœuvre ou organe équivalent fixé rigidement au pêne
A securing mechanism for a hinged sidelight panel. The securing mechanism includes a center latch bolt for latching the hinged sidelight panel and remote locking mechanisms for locking the hinged sidelight panel. A single lever handle is used to selectively retract the remote locking mechanisms and the latch bolt. At a first orientation of the handle, both the remote locking mechanisms and the latch bolt are engaged. At a second orientation of the handle, the latch bolt remains engaged, but the remote locking mechanisms retracted. At a third orientation, both the remote locking mechanisms and the latch bolt are disengaged. The orientation of the handle informs an observer whether the locks are engaged. In one embodiment, the full rotation is about 90°, enabling the use of longer lever handles without interference from door frames.
E05B 65/06 - Serrures pour emplois particuliers pour portes va-et-vient
E05C 9/18 - Parties constitutives des moyens d'immobilisation de fermeture ou des moyens fixes de retenue pour les extrémités de barres
E06B 3/36 - Aménagements des battants caractérisés par le genre de mouvementAménagements des battants modèles dans les ouverturesCaractéristiques des battants ou châssis ayant trait uniquement au genre de mouvement du battant pour un seul genre de mouvement avec un axe de rotation vertical unique sur l'un des côtés de l'ouverture, ou tournant dans l'ouverture
E05B 1/00 - Boutons ou poignées pour battantsBoutons, poignées ou boutons à pression pour serrures ou clenches sur battants
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
A device to limit an opening of a window having a hinged sash coupled to a window frame including a window opening limiting structure having a first member and a second member. One of them is securable to the sash and the other of the first member and the second member being securable to the frame. A selectively releasable coupler by which the first member and the second member are couplable is shiftable between a coupled status and a released status. The first member and the second member bridge a preselected distance such that the sash is inhibited from opening beyond a predetermined distance. The coupler is releasable so that the sash can be opened beyond the predetermined distance and re-engages automatically when the sash is closed.
A securing mechanism for a hinged sidelight panel. The securing mechanism includes a center latch bolt for latching the hinged sidelight panel and remote locking mechanisms for locking the hinged sidelight panel. A single lever handle is used to selectively retract the remote locking mechanisms and the latch bolt. At a first orientation of the handle, both the remote locking mechanisms and the latch bolt are engaged. At a second orientation of the handle, the latch bolt remains engaged, but the remote locking mechanisms retracted. At a third orientation, both the remote locking mechanisms and the latch bolt arc disengaged. The orientation of the handle informs an observer whether the locks are engaged. In one embodiment, the full rotation is about 90.degree., enabling the use of longer lever handles without interference from door frames.
Door and window hardware made primarily of metal, namely, brackets, tracks, latches, locks, knobs, handles, hinges, operators, and leversets; door and window hardware.
(1) Window hardware made primarily of metal, namely, latches and operators sold exclusively to window manufacturers.
(2) Window hardware made primarily of metal, namely, latches and operators in the nature of brackets, tracks, locks, latches, handles, hinges, rollers, sash lifts, pivot bars, vent stops, and leversets sold exclusively to window manufacturers.
A self locating tie bar guide for use with a tie bar. The tie bar guide defines a passage into which the tie bar is received. A tie bar receiving portion is shiftable between an open orientation in which the tie bar can be inserted into the passage and a closed orientation in which the tie bar is held in the passage. A resilient engaging member that engages a prelocated opening in the tie bar is resiliently biased toward the tie bar when the receiving portion is in the open orientation. The resilient tie bar engaging member is shiftable away from the tie bar when the receiving portion is in the closed orientation by contact between a portion of the resilient engaging member and another portion of the tie bar guide.
E05C 1/06 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne sans action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement
E05C 9/22 - Moyens de guidage pour barres, tringles ou câbles coulissants
E05B 15/00 - Autres détails constitutifs des serruresÉléments permettant l'enclenchement par pênes des dispositifs de fermeture
68.
SELF LOCATING TIE BAR GUIDE FOR SASH LOCK TIE BARS
A self locating tie bar guide for use with a tie bar having prelocated openings located thereupon. The tie bar guide includes a tie bar receiving portion defining a passage into which the tie bar is receivable. The tie bar receiving portion is shiftable between an open orientation in which the tie bar can be inserted into the passage and a closed orientation in which the tie bar is held in the passage. A resilient tie bar engaging member that engages at least one of the prelocated openings is resiliently biased toward the tie bar when the tie bar is in the tie bar passage and the tie bar receiving portion is in the open orientation. The resilient de bar engaging member is shiftable away from the tie bar when the tie bar receiving portion is in the closed orientation by contact between a portion of the resilient tie bar engaging member and another portion of the tie bar guide.
A device to limit an opening of a window having a hinged sash coupled to a window frame including a window opening limiting structure having a first member and a second member. One of them is securable to the sash and the other of the first member and the second member being securable to the frame. A selectively releasable coupler by which the first member and the second member are couplable is shiftable between a coupled status and a released status. The first member and the second member bridge a preselected distance such that the sash is inhibited from opening beyond a predetermined distance. The coupler is releasable so that the sash can be opened beyond the predetermined distance and re-engages automatically when the sash is closed.
E05C 17/24 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en une tringle unique pivotant à une extrémité, l'autre extrémité se déplaçant le long d'une pièce de guidage
E05C 17/32 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant consistant en plusieurs tringles pivotantes
A device to limit an opening of a window having a hinged sash coupled to a window frame including a window opening limiting structure having a first member and a second member. One of them is securable to the sash and the other of the first member and the second member being securable to the frame. A selectively releasable coupler by which the first member and the second member are couplable is shiftable between a coupled status and a released status. The first member and the second member bridge a preselected distance such that the sash is inhibited from opening beyond a predetermined distance. The coupler is releasable so that the sash can be opened beyond the predetermined distance and re-engages automatically when the sash is closed.
A hinge for a hingedly movable sash in a window having a frame, including a track assembly having a track and a shoe engageable with the track and reciprocally movable along the track. The shoe presents a first rolling member at a first portion thereof and a bearing portion at a second portion. The shoe is shiftable between a window closed configuration in which the bearing portion contacts the track and transmits loads from the track to the sash arm and a window moving configuration in which the rolling member contacts the track and transmits loads from the track to the sash arm and rolls along the track as the shoe translates along the track.
A hinge for a hingedly movable sash in a window having a frame, including a track assembly having a track and a shoe engageable with the track and reciprocally movable along the track. The shoe presents a first rolling member at a first portion thereof and a bearing portion at a second portion. The shoe is shiftable between a window closed configuration in which the bearing portion contacts the track and transmits loads from the track to the sash arm and a window moving configuration in which the rolling member contacts the track and transmits loads from the track to the sash arm and rolls along the track as the shoe translates along the track.
E05D 7/00 - Charnières, gonds ou pivots de structure particulière
E05D 15/30 - Suspensions pour battants portés sur des bras mobiles dans un plan horizontal à bras pivotants et guides coulissants
E05F 11/16 - Mécanismes par lesquels la barre déplace le battant déplaçant le battant par l'intermédiaire d'organes à accouplement par pivot, qui se déplacent dans un plan perpendiculaire à l'axe du pivot du battant
75.
MULTI-POINT MORTISE LOCK MECHANISM FOR SWINGING DOOR
A multipoint mortise lock mechanism for a swinging door, including a central cassette assembly operably coupled to an upper remote locking point assembly and a lower remote locking point assembly by a remote locking linkage. The central cassette assembly includes a housing, a deadbolt mechanism, a latchbolt mechanism, a remote locking point mechanism and an anti-slam mechanism. The anti-slam mechanism includes an anti-slam plunger that when in an extended position engages the remote locking linkage via a boss and a slot and thereby inhibits movement of the remote locking linkage whereby deployment of the remote locking point assemblies is prevented. The deadbolt mechanism includes a deadbolt extendible from the central cassette that is independently operable from the remote locking point mechanism. The deadbolt mechanism further includes an anti-back drive mechanism.
A window operator mountable on the frame of window having a hinged movable sash including a drive assembly for positioning the movable sash and a separately installable drive shaft for operating the drive assembly. The drive assembly includes a drive chain coupled to the movable sash of the window that extends and retracts to position the movable sash. The drive assembly can be mounted to the frame first without the drive shaft. After the window is installed, the drive shaft can be then inserted into the drive assembly and used to extend and retract the drive chain and move the movable sash. The window operator includes a drive shaft retention assembly for receiving and retaining the drive shaft once the drive shaft is inserted into the drive assembly.
A multipoint mortise lock mechanism for a swinging door, including a central cassette assembly operably coupled to an upper remote locking point assembly and a lower remote locking point assembly by a remote locking linkage. The central cassette assembly includes a housing, a deadbolt mechanism, a latchbolt mechanism, a remote locking point mechanism and an anti-slam mechanism. The anti-slam mechanism includes an anti-slam plunger that when in an extended position engages the remote locking linkage via a boss and a slot and thereby inhibits movement of the remote locking linkage whereby deployment of the remote locking point assemblies is prevented. The deadbolt mechanism includes a deadbolt extendible from the central cassette that is independently operable from the remote locking point mechanism. The deadbolt mechanism further includes an anti-back drive mechanism.
E05C 9/00 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant
E05C 1/04 - Dispositifs d'immobilisation avec pênes se déplaçant de façon rectiligne sans action d'une clenche avec poignée de manœuvre ou organe équivalent fixé rigidement au pêne
A hinge is provided for coupling a door to a door frame. The hinge comprises a jamb leaf adapted to attach to the door frame. The jamb leaf defines a pair of spaced apart knuckles. The hinge also provides a door interface assembly adapted to attach to the door, the door interface assembly including a door leaf base defining a recess with a cover portion disposed over the recess thereby defining an enclosure, and a door leaf plate, the door leaf plate defining a knuckle and a pin aperture, wherein a portion of the door leaf plate is received in the enclosure of the door leaf base, and wherein a pin extends from the door leaf base through the pin aperture of the door leaf plate to secure the door leaf plate in place within the enclosure. A horizontal adjustment element is provided, arranged to enable selective shifting of the door leaf plate within the recess of the door leaf base so as to adjust the horizontal position of the door relative to the door frame, the horizontal adjustment element comprising a screw threaded into the door leaf plate, the screw having a tip bearing against the door leaf base. A pin assembly is also provided, including a hinge pin extending through the spaced apart knuckles of the jamb leaf and the knuckle of the door leaf plate to operably couple the jamb leaf and the door interface assembly.
A multi-point lock assembly with shoot bolts adapted to fit a wide range of door heights with a limited number of standard components. The shoot bolts of the assembly can be trimmed to length and attached to other standard components to form the assembly.
E05C 3/02 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative sans action d'une clenche
E05C 9/00 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant
E05B 63/00 - Serrures à caractéristiques structurales particulières
E05B 65/08 - Serrures pour emplois particuliers pour battants coulissants
E05C 9/18 - Parties constitutives des moyens d'immobilisation de fermeture ou des moyens fixes de retenue pour les extrémités de barres
E05C 9/20 - Moyens d'accouplement pour barres, tringles ou câbles coulissants
E05C 9/04 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées en directions opposées lors de l'immobilisation ou de la libération
A multipoint lock for sliding doors. The multipoint lock mounted to a sliding door generally includes an active locking device having an active latch, and two passive locking devices, each having a passive latch. The latches are independently depth adjustable relative to an edge of the sliding door. The active locking device further includes sets of fastener apertures for receiving and securing a handle assembly thereto in at least two different positions. A lever having an actuator pin of the handling assembly can be positioned at various locations on the handle assembly such that fastener apertures of the handle assembly align with a different set of handle apertures of the active locking device depending on the position of the lever, Actuation of the active locking device by movement of the lever shifts the active latch and the passive latches simultaneously between locked and unlocked positions.
A multipoint lock for sliding doors. The multipoint lock mounted to a sliding door generally includes an active locking device having an active latch, and two passive locking devices, each having a passive latch. The latches are independently depth adjustable relative to an edge of the sliding door. The active locking device further includes sets of fastener apertures for receiving and securing a handle assembly thereto in at least two different positions. A lever having an actuator pin of the handling assembly can be positioned at various locations on the handle assembly such that fastener apertures of the handle assembly align with a different set of handle apertures of the active locking device depending on the position of the lever. Actuation of the active locking device by movement of the lever shifts the active latch and the passive latches simultaneously between locked and unlocked positions.
A multipoint lock for sliding doors. The multipoint lock mounted to a sliding door generally includes an active locking device having an active latch, and two passive locking devices, each having a passive latch. The latches are independently depth adjustable relative to an edge of the sliding door. The active locking device further includes sets of fastener apertures for receiving and securing a handle assembly thereto in at least two different positions. A lever having an actuator pin of the handling assembly can be positioned at various locations on the handle assembly such that fastener apertures of the handle assembly align with a different set of handle apertures of the active locking device depending on the position of the lever. Actuation of the active locking device by movement of the lever shifts the active latch and the passive latches simultaneously between locked and unlocked positions.
E05C 3/16 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche
E05C 3/30 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche le pêne étant commandé par un ressort ayant la forme d'un crochet
E05C 9/02 - Aménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec une barre coulissante immobilisant, lorsqu'elle est déplacée dans un sens, et libérant quand elle est déplacée dans le sens opposéAménagement de pênes à action simultanée ou d'autres dispositifs de blocage en des emplacements bien distincts sur le même battant avec deux barres coulissantes déplacées dans le même sens lors de l'immobilisation ou de la libération
A multi-point latch assembly having a single adjustment point for shifting the position of two or more latching members. The latch mechanism includes a housing and a carrier assembly received in the housing. The carrier assembly includes a pair of latch hooks. A carrier position adjustment assembly operably couples the housing and the carrier assembly such that the carrier assembly is selectively shiftable in the housing with the carrier position adjustment assembly to alter the distance the latch hooks protrude from the housing when the latch hooks are positioned in the second position. An anti-slam mechanism may also be coupled with the carrier, and may be selectively shiftable with the same adjustment mechanism.
MARVIN LUMBER AND CEDAR COMPANY, D/B/A MARVIN WINDOWS AND DOORS (USA)
TRUTH HARDWARE CORPORATION (USA)
Inventeur(s)
Curtis, Daniel J.
Vetter, Gregory J.
Abrégé
A window assembly including a frame having an interior portion and an exterior portion and a sash (104) having an interior portion (116) and an exterior portion (117). The window assembly includes an operational mode and a wash mode. In the operational mode, the sash (104) is movable from a closed position to a position in which the sash (104) is generally perpendicular with the frame. In the wash mode, the sash (104) is movable to a position where the exterior portion of the sash (104) faces toward the exterior of the frame.
E05D 15/58 - Suspensions pour battants à mouvements successifs différents à mouvements aussi bien de "va-et-vient" que coulissant
E06B 3/50 - Aménagements des battants caractérisés par le genre de mouvementAménagements des battants modèles dans les ouverturesCaractéristiques des battants ou châssis ayant trait uniquement au genre de mouvement du battant pour plusieurs genres de mouvement
MARVIN LUMBER AND CEDAR COMPANY, D/B/A MARVIN WINDOWS AND DOORS (USA)
TRUTH HARDWARE CORPORATION (USA)
Inventeur(s)
Curtis, Daniel, J.
Vetter, Gregory, J.
Abrégé
A window assembly including a frame having an interior portion and an exterior portion and a sash (104) having an interior portion (116) and an exterior portion (117). The window assembly includes an operational mode and a wash mode. In the operational mode, the sash (104) is movable from a closed position to a position in which the sash (104) is generally perpendicular with the frame. In the wash mode, the sash (104) is movable to a position where the exterior portion of the sash (104) faces toward the exterior of the frame.
E06B 3/50 - Aménagements des battants caractérisés par le genre de mouvementAménagements des battants modèles dans les ouverturesCaractéristiques des battants ou châssis ayant trait uniquement au genre de mouvement du battant pour plusieurs genres de mouvement
E05D 15/58 - Suspensions pour battants à mouvements successifs différents à mouvements aussi bien de "va-et-vient" que coulissant
A multi-point latch assembly having a single adjustment point for shifting the position of two or more latching members. The latch mechanism includes a housing and a carrier assembly received in the housing. The carrier assembly includes a pair of latch hooks. A carrier position adjustment assembly operably couples the housing and the carrier assembly such that the carrier assembly is selectively shiftable in the housing with the carrier position adjustment assembly to alter the distance the latch hooks protrude from the housing when the latch hooks are positioned in the second position. An anti-slam mechanism may also be coupled with the carrier, and may be selectively shiftable with the same adjustment mechanism.
E05C 5/00 - Dispositifs de fermeture avec pênes se déplaçant autrement que de façon rectiligne uniquement et de façon pivotante ou rotative uniquement
E05C 17/04 - Dispositifs pour tenir les battants dans une position d'ouvertureDispositifs pour limiter l'ouverture des battants ou pour tenir les battants dans une position d'ouverture par une pièce mobile disposée entre le battant et le dormantDispositifs de freinage, butées ou tampons combinés avec ces dispositifs par des moyens mécaniques par une barre mobile ou une pièce équivalente disposée entre le dormant et le battant
E05B 65/08 - Serrures pour emplois particuliers pour battants coulissants
A multi-point larch assembly having a single adjustment point for shifting the position of two or more latching members. The latch mechanism includes a housing and a carrier assembly received in the housing. The carrier assembly includes a pair of latch hooks. A carrier position adjustment assembly operably couples the housing and the carrier assembly such that the carrier assembly in selectively shiftable in the housing with the carrier position adjustment assembly to alter the distance the latch hooks protrude front the housing when the latch hooks are positioned in the second position. An anti-slam mechanism may also be coupled with the carrier, and may be selectively shiftable with the same adjustment mechanism.
E05C 3/16 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche
E05C 3/34 - Dispositifs d'immobilisation avec pênes se déplaçant de façon pivotante ou rotative avec action d'une clenche avec poignée de manœuvre ou organe équivalent se déplaçant autrement que rigidement avec la clenche le pêne étant commandé par un ressort ayant la forme d'un crochet avec doubles pênes fonctionnant simultanément
E05F 5/02 - Dispositifs de freinage, p. ex. ralentisseursButéesTampons particulièrement pour éviter le claquement des battants
A push-out style window assembly including window hardware for frictionally retaining an open position of the window under typical loading conditions. A push-out style window assembly generally includes a friction hinge assembly including a track, a sash arm, a support arm, and a friction arm. The friction arm can include an adjustable and/or detachable slide enabling adjustment of a frictional resistance between the friction slider and the support arm. Using the friction arm, frictional resistance is provided so as to provide control both during opening of the window and in retaining the position of an open window.
A push-out style window assembly including window hardware for frictionally retaining an open position of the window under typical loading conditions. A push-out style window assembly generally includes a friction hinge assembly including a track, a sash arm, a support arm, and a friction arm. The friction arm can include an adjustable and/or detachable slide enabling adjustment of a frictional resistance between the friction slider and the support arm. Using the friction arm, frictional resistance is provided so as to provide control both during opening of the window and in retaining the position of an open window.
Door and window hardware made primarily of metal, namely, brackets, tracks, latches, locks, knobs, handles, hinges and leversets all not for use with furniture
A sliding window having a pair of sashes with a latch mechanism on the meeting rail of one of the sashes for latching the sashes together. To open the window, the latch mechanism is disengaged by grasping a finger grip on a latch handle to retract a latch bolt. As one or more of the sashes is slid to open the window and the latch mechanism clears the meeting rail of the other sash, a trigger cam rotates so that a portion extends outward from the latch mechanism and another portion releases a spring tab to engage and hold the latch bolt in the retracted position. When the window is closed, the outwardly extending portion of the trigger cam contacts the meeting rail of the other sash, causing the trigger cam to rotate in the opposite direction and releasing the latch bolt.
(1) Door and window hardware, made primarily of metal, namely brackets, tracks, latches, locks, knobs, handles, hinges, operators, leversets and snubbers.
