An in-line suspended non-directional power sensor coupling configuration situated within a high frequency transmission line housing that allows non-directional current and sampling voltage elements to all be produced simultaneously on one or more double sided printed circuit boards (PCB). The power sensor coupling allows for repeatable calibrated coupling responses across a much wider frequency range with a single PCB assembly, as opposed to the need to cover equivalently sized frequency ranges with multiple individually fabricated coupling element assemblies.
G01R 15/18 - Adaptations fournissant une isolation en tension ou en courant, p. ex. adaptations pour les réseaux à haute tension ou à courant fort utilisant des dispositifs inductifs, p. ex. des transformateurs
H05K 5/00 - Enveloppes, coffrets ou tiroirs pour appareils électriques
A coaxial power sensor assembly configured to provide a broadband matched termination utilizing coplanar waveguide topology while simultaneously providing a source of heat energy for a surface mount chip thermistor element to measure applied input power. The coaxial thermal power sensor is comprised of a thin film resistive device on a dielectric substrate and a surface mount chip thermistor element placed in close planar proximity to the resistive device in order to maximize the heat flux via a closely coupled thermal path to the thermistor and alter the bias current through the resistance to be measured. The power sensor is intended to function from DC to 70 GHz, but the same should not be construed as a limitation.
G01R 21/02 - Dispositions pour procéder aux mesures de la puissance ou du facteur de puissance par des méthodes thermiques
H01R 24/42 - Dispositifs de couplage en deux pièces, ou l'une des pièces qui coopèrent dans ces dispositifs, caractérisés par leur structure générale ayant des contacts disposés concentriquement ou coaxialement spécialement adaptés à la haute fréquence comprenant des moyens d'adaptation d'impédance ou des composants électriques, p. ex. des filtres ou des interrupteurs
H01P 3/00 - Guides d'ondesLignes de transmission du type guide d'ondes
H01P 1/26 - Charges dispersives branchées à l'extrémité de lignes de transmission
H05K 1/18 - Circuits imprimés associés structurellement à des composants électriques non imprimés
H01C 17/00 - Appareils ou procédés spécialement adaptés à la fabrication de résistances
H01C 7/00 - Résistances fixes constituées par une ou plusieurs couches ou revêtementsRésistances fixes constituées de matériaux conducteurs en poudre ou de matériaux semi-conducteurs en poudre avec ou sans matériaux isolants
An in-line suspended power sensor coupling configuration situated within a high frequency transmission line housing that allows forward, reverse, and sampling voltage elements to all be produced simultaneously on one double sided printed circuit board (PCB). The power sensor coupling allows for calibrated coupling responses across a much wider frequency range with a single PCB assembly, as opposed to the need to cover equivalently sized frequency ranges with multiple individually fabricated coupling element assemblies.
H01P 5/12 - Dispositifs de couplage présentant au moins trois accès
H01P 5/16 - Dispositifs à accès conjugués, c.-à-d. dispositifs présentant au moins un accès découplé d'un autre accès
H01R 13/66 - Association structurelle avec des composants électriques incorporés
H01R 12/71 - Dispositifs de couplage pour circuits imprimés rigides ou structures similaires
H01R 13/6464 - Moyens pour empêcher la diaphonie en ajoutant des éléments capacitifs
H01R 13/658 - Dispositions pour le blindage en haute fréquence, p. ex. protection contre les parasites électromagnétiques ou les impulsions électromagnétiques
A power sensor system, assembly and method for use as a power sensor standard in the 50 to 75 GHz frequency range. The power sensing system comprises a housing comprising a dual ridged waveguide impedance transformer, and a resistive component attachable to a back side of the housing. The resistive component comprises a terminating element electrically, but not thermally isolated from a sensing element. The sensing element operates at a constant resistance and is perpendicularly oriented to the terminating element.
A dual-coplanar sensor architecture is constructed by launching from coaxial airline to a unique arrangement of coplanar waveguides, arranged symmetrically on both sides of a thin dielectric substrate. The center conductor of the coaxial airline makes electrical contact with the middle conductor of both the top and bottom coplanar waveguides. The characteristic impedance of the top and bottom coplanar waveguides is designed to be approximately twice the characteristic impedance of the coaxial airline, such that the parallel combination of the two coplanar waveguides is the characteristic impedance of the coaxial airline. Further, steps in both the ground planes and center conductor at the point of transition from coaxial to coplanar are used to tune the launch and minimize reflection at the launch.
H01C 7/04 - Résistances fixes constituées par une ou plusieurs couches ou revêtementsRésistances fixes constituées de matériaux conducteurs en poudre ou de matériaux semi-conducteurs en poudre avec ou sans matériaux isolants à coefficient de température négatif
A co-axial microwave bolometer architecture is disclosed that uses thick-film processes to construct very small thermistors on a substrate that is selected for low heat transfer. Thermal isolation is further enhanced by making the planar electrodes from a metal with lower heat transfer than typical electrical metals. Furthermore, a resistor with very strong temperature coefficient (thermistor), is arranged such that connecting metal paths are arranged axially, and as generally flat, thin, planar conductors. Additionally, the substrate of the thermistor is selected to have very low conductivity of heat, so the thermistor element itself is well isolated thermally from its surroundings.
H01C 7/13 - Résistances fixes constituées par une ou plusieurs couches ou revêtementsRésistances fixes constituées de matériaux conducteurs en poudre ou de matériaux semi-conducteurs en poudre avec ou sans matériaux isolants sensibles au courant
10.
Coaxial to dual co-planar waveguide launcher for microwave bolometry
A dual-coplanar sensor architecture is constructed by launching from coaxial airline to a unique arrangement of coplanar waveguides, arranged symmetrically on both sides of a thin dielectric substrate. The center conductor of the coaxial airline makes electrical contact with the middle conductor of both the top and bottom coplanar waveguides. The characteristic impedance of the top and bottom coplanar waveguides is designed to be approximately twice the characteristic impedance of the coaxial airline, such that the parallel combination of the two coplanar waveguides is the characteristic impedance of the coaxial airline. Further, steps in both the ground planes and center conductor at the point of transition from coaxial to coplanar are used to tune the launch and minimize reflection at the launch.
G01J 5/34 - Pyrométrie des radiations, p. ex. thermométrie infrarouge ou optique en utilisant des détecteurs électriques de radiations en utilisant des condensateurs, p. ex. des condensateurs pyroélectriques
G01K 7/08 - Mesure de la température basée sur l'utilisation d'éléments électriques ou magnétiques directement sensibles à la chaleur utilisant des éléments thermo-électriques, p. ex. des thermocouples l'objet à mesurer formant l'un des matériaux thermo-électriques, p. ex. du genre en pointe
G01K 7/22 - Mesure de la température basée sur l'utilisation d'éléments électriques ou magnétiques directement sensibles à la chaleur utilisant des éléments résistifs l'élément étant une résistance non linéaire, p. ex. une thermistance
A co-axial microwave bolometer architecture is disclosed that uses thick-film processes to construct very small thermistors on a substrate that is selected for low heat transfer. Thermal isolation is further enhanced by making the planar electrodes from a metal with lower heat transfer than typical electrical metals. Furthermore, a resistor with very strong temperature coefficient (thermistor), is arranged such that connecting metal paths are arranged axially, and as generally flat, thin, planar conductors. Additionally, the substrate of the thermistor is selected to have very low conductivity of heat, so the thermistor element itself is well isolated thermally from its surroundings.
09 - Appareils et instruments scientifiques et électriques
Produits et services
electronic testing equipment and measuring equipment, namely, differential amplifiers, calibration generators, function generators, pulse generators, time mark generators, sine wave generators, signal generators, counters, power supplies, audio test systems comprised of a programmable oscillator, programmable distortion analyzer, a controller, and optical frequency counters, signal switchers, interface devices, disc storage, and hard copy plotters, for performing and recording test results of critical audio measurements, programmable scanners, power module mainframes comprised of a common power source that allows combining different electronic test instruments to configure different multifunction and application specific packages for manual and automatic electronic testing, resistors, potentiometers, decade ratio transformers, resistance transfer standards for calibrating various resistance values of other metrology and calibration lab equipment, resistance standards for calibrating a single resistance value of other metrology and calibration lab equipment, ohmmeters, comparators, resistance measuring systems comprised of in-line decade resistors, coaxial-dial decade resistors, ratio transformers, resistance transfer standards, digital ohmmeters, and portable impedance bridges, for performing and recording critical resistance, capacitance and inductance measurements, impedance measuring systems comprised of digital impedance meters and AC ratio transformer standards, for evaluating and inspecting electronic components, transformer standards for calibrating various resistance values of other metrology and calibration lab equipment, voltmeters, resolver bridges, resolver standards for introducing known inputs for testing auto pilots and aircraft indicators, voltage calibrators, temperature calibrators switchboxes, thermometers, voltmeters, phase testers, solder system testers, temperature probes, line impedance stabilization networks, current probes, calibration fixtures, and directional couplers
09 - Appareils et instruments scientifiques et électriques
Produits et services
ELECTRONIC TESTING EQUIPMENT AND MEASURING EQUIPMENT, NAMELY, DIGITAL THERMOMETERS, DIGITAL MULTIMETERS, THERMOCOUPLE PROBES, THERMISTOR PROBES, DIGITAL VOLTMETERS
