Goods & Services

Common metals and their alloys; building and construction materials and elements of metal; railway material of metal; common metals, unwrought or semi-wrought; metal goods for construction purposes, in particular for the fastening of rail systems; ironmongery and small ironmongery, in particular for metal rail fastenings; nuts, bolts and fasteners, of metal; pipes, tubes and hoses, and fittings therefor, including valves, of metal; metal cables, wires and chains [non-electrical]; structures and transportable buildings of metal; signs and signboards, non-luminous and non-mechanical, of metal; beacons of metal, non-luminous; railway tracks; metal materials for railway tracks, in particular for rail fastenings; fish plates [rails]; turntables [railways]; railway sleepers of metal; eye bolts; railway points; steel buildings; metal supporting structures; metal rail supports; stops of metal; masts of metal; metal plates for fastening rails for rail vehicles, in particular base plates, ribbed plates, guide plates, pressure distribution plates, base plates, support plates, protective plates, inclination plates; metal springs for fastening rails for railway vehicles, in particular tension clamps and spiral springs; metal clips; metal track adjustment strips, bushings and wedges for fastening rails for rail vehicles; metal mounting hooks for fastening rails for rail vehicles; metal clamps for fastening rails for railway vehicles; metal covers for fastening rails for railway vehicles; containers of metal for storage, transport and packaging; metal washers; metal hexagon nuts; metal hook screws; metal spring rings; steel base plates; parts of the aforementioned goods, included in this class. Recorded content; information technology and audio-visual, multimedia and photographic devices; magnets, magnetizing and demagnetizing devices, in particular for rail fastenings; scientific and laboratory devices for treatment using electricity; apparatus, instruments and cables for electricity, in particular for fastening rail systems; electrical and electronic components; terminals [electricity]; terminal blocks (electrical connecting -); optical devices, enhancers and correctors; safety, security, protection and signalling devices; navigation, guidance, tracking, targeting and map making devices; measuring, detecting, monitoring and controlling devices; controllers and regulators; sensors, detectors and monitoring instruments; vibration sensors for rail fastenings; temperature sensors; gps/geolocation/location sensors; position sensors; sensors for measuring surface structures or surface roughness; sensors for measuring material deformations; ultrasonic sensors; sensors for measuring material properties or material properties using ultrasound; x-ray sensors; sensors for measuring material properties or material properties using x-rays; electric sensors; optical fibre sensors; digital sensors; optical sensors; piezoelectric sensors; sensors for use with machine tools; on-off sensors; electro-optical sensors; sensor controllers; sensors for measuring instruments; sensors used in plant control; sensors for determining velocity; sensors for brake pad wear; scientific research and laboratory apparatus, educational apparatus and simulators; electrical apparatus and instruments for railway and transport purposes, included in class 9; devices for recording, transmitting, storing, processing and reproducing analogue and digital sensor and measurement data; communications equipment; data processing equipment and accessories (electrical and mechanical); data storage devices and media; calculators; computers; electricity indicators; electronic notice boards; beacons, luminous; observation instruments; chips [integrated circuits]; coder; computer programmes [programs], recorded; application software; data processing programs for the mobility sector, in particular rail and road traffic technology, trams, freight transport and passenger transport [local and high-speed transport]; artificial intelligence and machine learning software. Flexible pipes, tubes, hoses and fittings therefor (including valves), and fittings for rigid pipes, all non- metallic; non-metallic pipe connectors; insulation and barrier articles and materials; latex [rubber]; gutta-percha, gum, asbestos, mica and substitutes for these materials, in a raw or partly worked state; semi-worked plastic substances; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastic material in extruded form for use in production; angle guide plates as insulation and damping materials; insulating materials as rail supports; pipe fasteners, connectors and holders, non-metallic. Building and construction materials and elements, not of metal; non-metallic track construction materials, in particular for rail fastenings; materials for [single-track] rail structures, non-metallic; pipes and valves therefor, not of metal; asphalt, pitch, tar and bitumen; structures and transportable buildings, not of metal; scaffolding, non-metallic; reinforcement for building purposes, not of metal; beacons, not of metal, non-luminous; concrete components, especially for rail fastening; xylolith; railway sleepers, not of metal; doors, gates, windows and window coverings, not of metal; masts [poles], not of metal; signal boards and signalling devices, non-luminous, non-mechanical and non-metallic; posts, not of metal, for power lines; tanks of masonry; supporting structures not made of metal; wall linings, not of metal, for building; plates, as non-metallic building material, for fastening rails for rail vehicles, in particular [angle] guide plates, pressure distribution plates, elastic intermediate plates, shims, base plates, support plates, protective plates, ribbed plates; track adjustment strips, bushings and wedges as well as track plates, not of metal, for fastening rails for railway vehicles; covers, not of metal, for rail fastenings; supporting strips and trestles, not of metal, for building purposes; plastic base plates; non-metallic spacers for use in road construction, particularly for fastening rails; parts of the aforementioned goods, included in this class. Fasteners, non-metallic; cable fasteners, connectors and holders, non-metallic; non-metallic pipe fasteners; valves, not of metal, for containers; plastic valves, other than machine parts; tanks, not made of metal and not made of masonry; plugs [dowels], not of metal; clamps, not of metal, in particular rail foot clamps for holding damping elements; plastic screw anchors; clip clamps, not of metal; clips made of plastics. Building, construction and demolition; rental of tools, plant and equipment for construction, demolition, cleaning and maintenance; construction, especially for rail fastening; installation, maintenance, care, servicing, cleaning and repair of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; condition-based and predictive maintenance and servicing of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; installation, maintenance and repair of electrical, pneumatic, hydraulic and electronic devices, sensors and components related to rail fastening systems; advisory services relating to the installation of fixings; maintenance, repair and servicing of electrical installations, data processing equipment and computers, apparatus and instruments for communications technology, data processing programs, apparatus and instruments for low-current technology, namely for communications, high-frequency and control technology, as well as the apparatus and instruments listed in class 9; all the aforementioned services, in particular in the field of railways and rail transport. It services; development, programming, implementation, installation and maintenance of software; development and planning of technical solutions and products in the field of sensor and measurement technology; it consultancy, advisory and information services; it security, protection and restoration; data duplication and conversion services, data coding services; science and technology services; rental of science and technology equipment; services of engineers and physicists related to rail fastenings; technical consulting and planning in the field of railway and traffic engineering; engineering project management services; surveying services; exploration, namely investigation and research into soil and subsoil properties or composition; testing, authentication and quality control of rail vehicle fastenings; technical advice regarding inspections, especially for rail fastening systems; construction drafting; design services; software design services in the field of sensor and measurement technology, especially for rail fastenings; scientific and technological research and development as well as industrial analysis in the field of railway and transport engineering; preparation of technical, scientific and technological reports; material testing and analysis, especially for rail fastening systems; carrying out technical investigations and checks to collect data and carrying out technical analysis of the data obtained; analysis of data to improve maintenance work on rail infrastructure and all production means, equipment and machinery, as well as to improve the availability of rail infrastructure, in particular for the fastening of rail systems; technical collection and recording of sensor and measurement data, particularly with regard to rail fastenings; technical data analysis services; computer programming services for the analysis of data; research in the field of artificial intelligence technology; technical inspection of rail infrastructure; condition, damage and failure prediction of rail infrastructure components based on technical measurements and data; consulting and information services on condition-based infrastructure availability management [scientific and technological services]; technical inspection of rail infrastructure maintenance machines or measuring or transport vehicles; condition, damage and failure prediction of rail infrastructure processing or transport vehicles and machines based on technical measurements and data [scientific and technological services]; technical planning, research and technical development of systems, facilities and equipment, particularly in the field of railway and road traffic engineering.

Abstract

Presented and described is an angled guide plate (1) for fastening rails (17) for rail vehicles on a sleeper (18). Also presented and described is a fastening system (13) for fastening rails (17) for rail vehicles on a sleeper (18), the fastening system comprising: at least one angled guide plate (1), a resilient intermediate layer (16) for resting on the sleeper (18) under the rail (17), and at least one tension clamp (14).

IPC Classes  ?

• E01B 9/30 - Fastening on wooden or concrete sleepers or on masonry with clamp members by resilient steel clips
• E01B 9/28 - Fastening on wooden or concrete sleepers or on masonry with clamp members

Goods & Services

(1) Common metals and their alloys; building and construction materials and elements of metal; railway material of metal; common metals, unwrought or semi-wrought; metal goods for construction purposes, in particular for the fastening of rail systems; ironmongery and small ironmongery, in particular for metal rail fastenings; nuts, bolts and fasteners, of metal; pipes, tubes and hoses, and fittings therefor, including valves, of metal; metal cables, wires and chains [non-electrical]; structures and transportable buildings of metal; signs and signboards, non-luminous and non-mechanical, of metal; beacons of metal, non-luminous; railway tracks; metal materials for railway tracks, in particular for rail fastenings; fish plates [rails]; turntables [railways]; railway sleepers of metal; eye bolts; railway points; steel buildings; metal supporting structures; metal rail supports; stops of metal; masts of metal; metal plates for fastening rails for rail vehicles, in particular base plates, ribbed plates, guide plates, pressure distribution plates, base plates, support plates, protective plates, inclination plates; metal springs for fastening rails for railway vehicles, in particular tension clamps and spiral springs; metal clips; metal track adjustment strips, bushings and wedges for fastening rails for rail vehicles; metal mounting hooks for fastening rails for rail vehicles; metal clamps for fastening rails for railway vehicles; metal covers for fastening rails for railway vehicles; containers of metal for storage, transport and packaging; metal washers; metal hexagon nuts; metal hook screws; metal spring rings; steel base plates; parts of the aforementioned goods, included in this class. (2) Recorded content; information technology and audio-visual, multimedia and photographic devices; magnets, magnetizing and demagnetizing devices, in particular for rail fastenings; scientific and laboratory devices for treatment using electricity; apparatus, instruments and cables for electricity, in particular for fastening rail systems; electrical and electronic components; terminals [electricity]; terminal blocks (electrical connecting -); optical devices, enhancers and correctors; safety, security, protection and signalling devices; navigation, guidance, tracking, targeting and map making devices; measuring, detecting, monitoring and controlling devices; controllers and regulators; sensors, detectors and monitoring instruments; vibration sensors for rail fastenings; temperature sensors; gps/geolocation/location sensors; position sensors; sensors for measuring surface structures or surface roughness; sensors for measuring material deformations; ultrasonic sensors; sensors for measuring material properties or material properties using ultrasound; x-ray sensors; sensors for measuring material properties or material properties using x-rays; electric sensors; optical fibre sensors; digital sensors; optical sensors; piezoelectric sensors; sensors for use with machine tools; on-off sensors; electro-optical sensors; sensor controllers; sensors for measuring instruments; sensors used in plant control; sensors for determining velocity; sensors for brake pad wear; scientific research and laboratory apparatus, educational apparatus and simulators; electrical apparatus and instruments for railway and transport purposes, included in class 9; devices for recording, transmitting, storing, processing and reproducing analogue and digital sensor and measurement data; communications equipment; data processing equipment and accessories (electrical and mechanical); data storage devices and media; calculators; computers; electricity indicators; electronic notice boards; beacons, luminous; observation instruments; chips [integrated circuits]; coder; computer programmes [programs], recorded; application software; data processing programs for the mobility sector, in particular rail and road traffic technology, trams, freight transport and passenger transport [local and high-speed transport]; artificial intelligence and machine learning software. (3) Flexible pipes, tubes, hoses and fittings therefor (including valves), and fittings for rigid pipes, all non- metallic; non-metallic pipe connectors; insulation and barrier articles and materials; latex [rubber]; gutta-percha, gum, asbestos, mica and substitutes for these materials, in a raw or partly worked state; semi-worked plastic substances; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastic material in extruded form for use in production; angle guide plates as insulation and damping materials; insulating materials as rail supports; pipe fasteners, connectors and holders, non-metallic. (4) Building and construction materials and elements, not of metal; non-metallic track construction materials, in particular for rail fastenings; materials for [single-track] rail structures, non-metallic; pipes and valves therefor, not of metal; asphalt, pitch, tar and bitumen; structures and transportable buildings, not of metal; scaffolding, non-metallic; reinforcement for building purposes, not of metal; beacons, not of metal, non-luminous; concrete components, especially for rail fastening; xylolith; railway sleepers, not of metal; doors, gates, windows and window coverings, not of metal; masts [poles], not of metal; signal boards and signalling devices, non-luminous, non-mechanical and non-metallic; posts, not of metal, for power lines; tanks of masonry; supporting structures not made of metal; wall linings, not of metal, for building; plates, as non-metallic building material, for fastening rails for rail vehicles, in particular [angle] guide plates, pressure distribution plates, elastic intermediate plates, shims, base plates, support plates, protective plates, ribbed plates; track adjustment strips, bushings and wedges as well as track plates, not of metal, for fastening rails for railway vehicles; covers, not of metal, for rail fastenings; supporting strips and trestles, not of metal, for building purposes; plastic base plates; non-metallic spacers for use in road construction, particularly for fastening rails; parts of the aforementioned goods, included in this class. (5) Fasteners, non-metallic; cable fasteners, connectors and holders, non-metallic; non-metallic pipe fasteners; valves, not of metal, for containers; plastic valves, other than machine parts; tanks, not made of metal and not made of masonry; plugs [dowels], not of metal; clamps, not of metal, in particular rail foot clamps for holding damping elements; plastic screw anchors; clip clamps, not of metal; clips made of plastics. (1) Building, construction and demolition; rental of tools, plant and equipment for construction, demolition, cleaning and maintenance; construction, especially for rail fastening; installation, maintenance, care, servicing, cleaning and repair of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; condition-based and predictive maintenance and servicing of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; installation, maintenance and repair of electrical, pneumatic, hydraulic and electronic devices, sensors and components related to rail fastening systems; advisory services relating to the installation of fixings; maintenance, repair and servicing of electrical installations, data processing equipment and computers, apparatus and instruments for communications technology, data processing programs, apparatus and instruments for low-current technology, namely for communications, high-frequency and control technology, as well as the apparatus and instruments listed in class 9; all the aforementioned services, in particular in the field of railways and rail transport. (2) It services; development, programming, implementation, installation and maintenance of software; development and planning of technical solutions and products in the field of sensor and measurement technology; it consultancy, advisory and information services; it security, protection and restoration; data duplication and conversion services, data coding services; science and technology services; rental of science and technology equipment; services of engineers and physicists related to rail fastenings; technical consulting and planning in the field of railway and traffic engineering; engineering project management services; surveying services; exploration, namely investigation and research into soil and subsoil properties or composition; testing, authentication and quality control of rail vehicle fastenings; technical advice regarding inspections, especially for rail fastening systems; construction drafting; design services; software design services in the field of sensor and measurement technology, especially for rail fastenings; scientific and technological research and development as well as industrial analysis in the field of railway and transport engineering; preparation of technical, scientific and technological reports; material testing and analysis, especially for rail fastening systems; carrying out technical investigations and checks to collect data and carrying out technical analysis of the data obtained; analysis of data to improve maintenance work on rail infrastructure and all production means, equipment and machinery, as well as to improve the availability of rail infrastructure, in particular for the fastening of rail systems; technical collection and recording of sensor and measurement data, particularly with regard to rail fastenings; technical data analysis services; computer programming services for the analysis of data; research in the field of artificial intelligence technology; technical inspection of rail infrastructure; condition, damage and failure prediction of rail infrastructure components based on technical measurements and data; consulting and information services on condition-based infrastructure availability management [scientific and technological services]; technical inspection of rail infrastructure maintenance machines or measuring or transport vehicles; condition, damage and failure prediction of rail infrastructure processing or transport vehicles and machines based on technical measurements and data [scientific and technological services]; technical planning, research and technical development of systems, facilities and equipment, particularly in the field of railway and road traffic engineering.

Goods & Services

Common metals and their alloys; building and construction materials and elements of metal; railway material of metal; common metals, unwrought or semi-wrought; metal goods for construction purposes, in particular for the fastening of rail systems; ironmongery and small ironmongery, in particular for metal rail fastenings; nuts, bolts and fasteners, of metal; pipes, tubes and hoses, and fittings therefor, including valves, of metal; metal cables, wires and chains [non-electrical]; structures and transportable buildings of metal; signs and signboards, non-luminous and non-mechanical, of metal; beacons of metal, non-luminous; railway tracks; metal materials for railway tracks, in particular for rail fastenings; fish plates [rails]; turntables [railways]; railway sleepers of metal; eye bolts; railway points; steel buildings; metal supporting structures; metal rail supports; stops of metal; masts of metal; metal plates for fastening rails for rail vehicles, in particular base plates, ribbed plates, guide plates, pressure distribution plates, base plates, support plates, protective plates, inclination plates; metal springs for fastening rails for railway vehicles, in particular tension clamps and spiral springs; metal clips; metal track adjustment strips, bushings and wedges for fastening rails for rail vehicles; metal mounting hooks for fastening rails for rail vehicles; metal clamps for fastening rails for railway vehicles; metal covers for fastening rails for railway vehicles; containers of metal for storage, transport and packaging; metal washers; metal hexagon nuts; metal hook screws; metal spring rings; steel base plates; parts of the aforementioned goods, included in this class. Recorded content; information technology and audio-visual, multimedia and photographic devices; magnets, magnetizing and demagnetizing devices, in particular for rail fastenings; scientific and laboratory devices for treatment using electricity; apparatus, instruments and cables for electricity, in particular for fastening rail systems; electrical and electronic components; terminals [electricity]; terminal blocks (electrical connecting -); optical devices, enhancers and correctors; safety, security, protection and signalling devices; navigation, guidance, tracking, targeting and map making devices; measuring, detecting, monitoring and controlling devices; controllers and regulators; sensors, detectors and monitoring instruments; vibration sensors for rail fastenings; temperature sensors; gps/geolocation/location sensors; position sensors; sensors for measuring surface structures or surface roughness; sensors for measuring material deformations; ultrasonic sensors; sensors for measuring material properties or material properties using ultrasound; x-ray sensors; sensors for measuring material properties or material properties using x-rays; electric sensors; optical fibre sensors; digital sensors; optical sensors; piezoelectric sensors; sensors for use with machine tools; on-off sensors; electro-optical sensors; sensor controllers; sensors for measuring instruments; sensors used in plant control; sensors for determining velocity; sensors for brake pad wear; scientific research and laboratory apparatus, educational apparatus and simulators; electrical apparatus and instruments for railway and transport purposes, included in class 9; devices for recording, transmitting, storing, processing and reproducing analogue and digital sensor and measurement data; communications equipment; data processing equipment and accessories (electrical and mechanical); data storage devices and media; calculators; computers; electricity indicators; electronic notice boards; beacons, luminous; observation instruments; chips [integrated circuits]; coder; computer programmes [programs], recorded; application software; data processing programs for the mobility sector, in particular rail and road traffic technology, trams, freight transport and passenger transport [local and high-speed transport]; artificial intelligence and machine learning software. Flexible pipes, tubes, hoses and fittings therefor (including valves), and fittings for rigid pipes, all non- metallic; non-metallic pipe connectors; insulation and barrier articles and materials; latex [rubber]; gutta-percha, gum, asbestos, mica and substitutes for these materials, in a raw or partly worked state; semi-worked plastic substances; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastic material in extruded form for use in production; angle guide plates as insulation and damping materials; insulating materials as rail supports; pipe fasteners, connectors and holders, non-metallic. Building and construction materials and elements, not of metal; non-metallic track construction materials, in particular for rail fastenings; materials for [single-track] rail structures, non-metallic; pipes and valves therefor, not of metal; asphalt, pitch, tar and bitumen; structures and transportable buildings, not of metal; scaffolding, non-metallic; reinforcement for building purposes, not of metal; beacons, not of metal, non-luminous; concrete components, especially for rail fastening; xylolith; railway sleepers, not of metal; doors, gates, windows and window coverings, not of metal; masts [poles], not of metal; signal boards and signalling devices, non-luminous, non-mechanical and non-metallic; posts, not of metal, for power lines; tanks of masonry; supporting structures not made of metal; wall linings, not of metal, for building; plates, as non-metallic building material, for fastening rails for rail vehicles, in particular [angle] guide plates, pressure distribution plates, elastic intermediate plates, shims, base plates, support plates, protective plates, ribbed plates; track adjustment strips, bushings and wedges as well as track plates, not of metal, for fastening rails for railway vehicles; covers, not of metal, for rail fastenings; supporting strips and trestles, not of metal, for building purposes; plastic base plates; non-metallic spacers for use in road construction, particularly for fastening rails; parts of the aforementioned goods, included in this class. Fasteners, non-metallic; cable fasteners, connectors and holders, non-metallic; non-metallic pipe fasteners; valves, not of metal, for containers; plastic valves, other than machine parts; tanks, not made of metal and not made of masonry; plugs [dowels], not of metal; clamps, not of metal, in particular rail foot clamps for holding damping elements; plastic screw anchors; clip clamps, not of metal; clips made of plastics. Building, construction and demolition; rental of tools, plant and equipment for construction, demolition, cleaning and maintenance; construction, especially for rail fastening; installation, maintenance, care, servicing, cleaning and repair of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; condition-based and predictive maintenance and servicing of railway tracks, rails, switches, equipment and fittings of railway facilities as well as control systems [hardware] and associated network structures [hardware]; installation, maintenance and repair of electrical, pneumatic, hydraulic and electronic devices, sensors and components related to rail fastening systems; advisory services relating to the installation of fixings; maintenance, repair and servicing of electrical installations, data processing equipment and computers, apparatus and instruments for communications technology, data processing programs, apparatus and instruments for low-current technology, namely for communications, high-frequency and control technology, as well as the apparatus and instruments listed in class 9; all the aforementioned services, in particular in the field of railways and rail transport. It services; development, programming, implementation, installation and maintenance of software; development and planning of technical solutions and products in the field of sensor and measurement technology; it consultancy, advisory and information services; it security, protection and restoration; data duplication and conversion services, data coding services; science and technology services; rental of science and technology equipment; services of engineers and physicists related to rail fastenings; technical consulting and planning in the field of railway and traffic engineering; engineering project management services; surveying services; exploration, namely investigation and research into soil and subsoil properties or composition; testing, authentication and quality control of rail vehicle fastenings; technical advice regarding inspections, especially for rail fastening systems; construction drafting; design services; software design services in the field of sensor and measurement technology, especially for rail fastenings; scientific and technological research and development as well as industrial analysis in the field of railway and transport engineering; preparation of technical, scientific and technological reports; material testing and analysis, especially for rail fastening systems; carrying out technical investigations and checks to collect data and carrying out technical analysis of the data obtained; analysis of data to improve maintenance work on rail infrastructure and all production means, equipment and machinery, as well as to improve the availability of rail infrastructure, in particular for the fastening of rail systems; technical collection and recording of sensor and measurement data, particularly with regard to rail fastenings; technical data analysis services; computer programming services for the analysis of data; research in the field of artificial intelligence technology; technical inspection of rail infrastructure; condition, damage and failure prediction of rail infrastructure components based on technical measurements and data; consulting and information services on condition-based infrastructure availability management [scientific and technological services]; technical inspection of rail infrastructure maintenance machines or measuring or transport vehicles; condition, damage and failure prediction of rail infrastructure processing or transport vehicles and machines based on technical measurements and data [scientific and technological services]; technical planning, research and technical development of systems, facilities and equipment, particularly in the field of railway and road traffic engineering.

Abstract

The invention relates to a bridge for a rail vehicle, including a track, which is formed from two parallel rails (S1, S2) and is provided for being driven on by the rail vehicle, and including a bridge beam (B1, B2), which supports the rails (S1, S2) of the track and is aligned transversely to a support profile (T1, T2) of the bridge. The bridge beam (B1, B2) is supported by a height adjustment element (R1, R2) arranged between the support profile (T1, T2) and the bridge beam (B1, B2), and wherein at least one fastening device is provided by means of which the position of the bridge beam (B1, B2) is fixed in relation to the height adjustment element (R1, B2). In order to be able to achieve an exact positioning of the bridge beams at their target height with reduced effort and at low costs, the invention proposes to design the height adjustment element (R1, R2) as a single-piece block, whose height (HR) is adapted to the distance between the support profile (T1, T2) and the bridge beam (B1, B2) by means of material-removing processing. Preferably, the bridge beam and the height adjustment element thereby consist of a plastic-based material, in particular a plastic-sand mixture.

IPC Classes  ?

• E01B 2/00 - General structure of permanent way
• E01B 3/44 - Transverse or longitudinal sleepersOther means resting directly on the ballastway for supporting rails made from other materials only if the material is essential
• E01D 19/12 - Grating or flooring for bridgesFastening railway sleepers or tracks to bridges

Abstract

A spring wire which can be cold formed well at diameters of at least 9 mm, but has improved mechanical properties. The spring wire is manufactured from a steel including, in % by weight, C: 0.35-0.42%, Si: 1.5-1.8%, Mn: 0.5-0.8%, Cr: 0.05-0.25%, Nb: 0.020-0.10%, V: 0.020-0.10%, N: 0.0040-0.0120%, Al: ≤0.03% and as the remainder iron and unavoidable impurities, wherein the total content of impurities is limited to at most 0.2% and the impurities include up to 0.025% P and up to 0.025% S. The spring wire is in particular suitable for the manufacture of a tension clamp with optimized usage properties. Also, a method which enables the practice-oriented production of the spring wire.

IPC Classes  ?

• C22C 38/26 - Ferrous alloys, e.g. steel alloys containing chromium with niobium or tantalum
• C22C 38/02 - Ferrous alloys, e.g. steel alloys containing silicon
• C22C 38/24 - Ferrous alloys, e.g. steel alloys containing chromium with vanadium
• C22C 38/06 - Ferrous alloys, e.g. steel alloys containing aluminium
• C22C 38/04 - Ferrous alloys, e.g. steel alloys containing manganese
• C22C 38/00 - Ferrous alloys, e.g. steel alloys
• C21D 8/06 - Modifying the physical properties by deformation combined with, or followed by, heat treatment during manufacturing of rods or wires

Abstract

The invention relates to a system and an assembly (1) constructed on such a system for fastening a rail (S) to a substrate (2). The system comprises a planar element (3) having a through-opening (21, 22) leading from the upper face (14) to the lower face (20) thereof, and comprises an anchor (4, 5) having an anchor body (27) which is inserted into the substrate (2) during use and an insertion opening defined by an end portion (28) of the anchor body (27) for inserting a fastening element (11, 12) into the anchor body (27). According to the invention, a holding portion (29) which projects laterally from the end portion (28) is connected to the end portion (28) of the anchor body (27) via a connecting portion (30-33) provided with a predetermined breaking point. On the lower face (20) of the planar element (3), a holder (38, 39) is provided in which the through-opening (21, 22) of the planar element (3) opens and the anchor (4, 5) is held with the holding portion (29) thereof. The holder (38, 39) forms a stop (48) for the holding portion (29) that acts in the longitudinal direction of the anchor (4, 5). The inner contour of the through-opening (21, 22) of the planar element (3) is adapted to the outer contour of the anchor in such a way that the anchor body (27) can be moved through the through-opening (21, 22) of the planar element (3) after a breakage of the connecting portion (30-33).

IPC Classes  ?

• F16B 13/14 - Non-metallic plugs or sleevesUse of liquid, loose solid or kneadable material therefor
• E01B 9/18 - Plugs, sleeves, thread linings, or other inserts for holes in sleepers for concrete sleepers
• E01B 9/38 - Indirect fastening of rails by using tie-plates or chairsFastening of rails on the tie-plates or in the chairs
• E01B 31/26 - Inserting or removing inserts or fillings for holes in sleepers, e.g. plugs, sleeves

Abstract

An intermediate plate that is elastically resilient in the direction of its overall thickness (D22) and intended for supporting a rail (S) for a rail vehicle on an underlying surface (U), wherein the intermediate plate (7a, 7b) has, on at least one of its longitudinal sides, a longitudinal side portion (16, 17; 23, 24) that projects laterally with respect to a central portion of the intermediate plate (7a, 7b) and that has a thickness (DI) that is less than the overall thickness (D22) of the intermediate plate (7a, 7b). In order for such an intermediate plate to be able to be produced in a simplified manner while having optimized use properties, an intermediate plate (7a, 7b) is formed by at least two superposed elastic layers (15a, 15b; 22a, 22b), of which the first layer has a first stiffness and the second layer has a second stiffness. At the same time, the longitudinal side portion (16, 17; 23, 24) of the intermediate plate (7a, 7b) is formed by a portion of the first elastic layer (15a, 22a) that projects beyond the respective longitudinal edge of the second elastic layer (15b, 22b), and the central region of the intermediate plate (7a, 7b) is jointly formed by the second elastic layer (15b, 22b) and the portion of the first elastic layer (15a, 22a) that is covered by the second elastic layer (15b, 22b).

IPC Classes  ?

• E01B 9/68 - Pads or the like, e.g. of wood, rubber, placed under the rail, tie-plate, or chair

Abstract

The invention relates to a guide plate for laterally guiding a rail in a rail attachment point formed on a railroad tie, wherein the guide plate has a top side having a support surface for supporting a spring element, an underside, by way of which the guide plate is supported on the railroad tie during use, a support segment having a support surface, by way of which the guide plate is supported, during use, on a shoulder provided on the railroad tie, and possesses a guide segment which is formed opposite to the support segment, and on which a guide surface is present, on which a rail is laterally guided during use. In order to counteract twisting of the rail and concomitantly the risk of the occurrence of track warping at high outdoor temperatures when using such a guide plate in a rail attachment point, a latch projection is formed in lateral end segments of the guide surface, in each instance, projecting away from the guide surface in the longitudinal direction of the guide plate, which is provided for the purpose of engaging, during use, under the longitudinal side of the rail that is assigned to the guide surface, in each instance, wherein the distance between the latch projections amounts to at least 60% of the width of the guide surface.

IPC Classes  ?

• E01B 9/28 - Fastening on wooden or concrete sleepers or on masonry with clamp members
• E01B 9/00 - Fastening rails on sleepers, or the like
• E01B 9/02 - Fastening rails, tie-plates, or chairs directly on sleepers or foundationsMeans therefor
• E01B 9/30 - Fastening on wooden or concrete sleepers or on masonry with clamp members by resilient steel clips
• E01B 9/36 - Metal sole-plates for rails which rails are directly fastened to sleepers
• E01B 9/48 - Fastening the rail on the tie-plate by clamps by resilient steel clips
• E01B 9/62 - Rail fastenings incorporating resilient supports
• E01B 9/64 - Rail fastenings gripping or encircling the sleeper
• E01B 9/66 - Rail fastenings allowing the adjustment of the position of the rails, so far as not covered by the preceding groups
• E01B 9/68 - Pads or the like, e.g. of wood, rubber, placed under the rail, tie-plate, or chair

Abstract

The invention relates to a bridge for a rail vehicle, the bridge comprising a track formed by two rails (S1, S2) which extend in parallel and are provided for the rail vehicle to travel on, and comprising a bridge beam (B1, B2) that carries the rails (S1, S2) of the track and is oriented transversely to a carrier profile (T1, T2) of the bridge, wherein the bridge beam (B1, B2) is supported by a height-regulating element (R1, R2) situated between the carrier profile (T1, T2) and the bridge beam (B1, B2), and wherein at least one fastening device is provided which fixes the position of the bridge beam (B1, B2) with respect to the height-regulating element (R1, R2). In order to achieve exact positioning of the bridge beam at its intended height with reduced complexity and at low cost, according to the invention the height-regulating element (R1, R2) is formed as a single-piece block, the height (HR) of which is adjusted, by machining, to the spacing between the carrier profile (T1, T2) and the bridge beam (B1, B2). The bridge beam and the height-regulating element preferably consist of a plastics-based material, in particular a plastics–sand mixture.

IPC Classes  ?

• E01B 2/00 - General structure of permanent way
• E01B 3/44 - Transverse or longitudinal sleepersOther means resting directly on the ballastway for supporting rails made from other materials only if the material is essential
• E01D 19/12 - Grating or flooring for bridgesFastening railway sleepers or tracks to bridges

Abstract

A base plate, which is made of plastic and is intended for supporting a rail for a rail vehicle on a substrate, may include a lower face, and an upper face on which a supporting surface for the rail is formed, a recess, from which a passage leads to the upper face of the base plate, being formed in the lower face of the base plate, the diameter of the recess in a direction transverse to the longitudinal axis of the passage being greater at least in part than the diameter of the passage, so that a stop for an insert piece fitted into the recess is formed on the top surface, assigned to the upper face of the base plate of the recess.

IPC Classes  ?

• E01B 9/02 - Fastening rails, tie-plates, or chairs directly on sleepers or foundationsMeans therefor
• E01B 9/40 - Tie-plates for flat-bottom rails

Abstract

The invention relates to a sleeper for the track superstructure, which is manufactured in one piece from a plastic material, with the sleeper having an elongated base shape with two end sections, which are connected by a middle section of the sleeper and held at a distance and on their upper side in each case one contact surface is provided for in each case one rail to be supported on the respective end section with a reinforcement extending in the longitudinal direction of the sleeper being embedded into the middle section. In order to design such a plastic sleeper such that it has optimised strength and can be reliably manufactured even using cost-effective plastic/sand mixtures having a high proportion of sand, the invention proposes that the reinforcement extends over the length of the middle section, that the reinforcement is in each case anchored in the respective end section in an edge region of the end sections assigned to the middle section and in that the reinforcement is wholly or partially arranged in the upper quarter of the height of the sleeper.

IPC Classes  ?

• E01B 3/32 - Transverse or longitudinal sleepersOther means resting directly on the ballastway for supporting rails made from concrete or from natural or artificial stone with armouring or reinforcement
• E01B 3/44 - Transverse or longitudinal sleepersOther means resting directly on the ballastway for supporting rails made from other materials only if the material is essential
• C04B 14/38 - Fibrous materialsWhiskers
• C04B 16/04 - Macromolecular compounds
• C04B 26/02 - Macromolecular compounds
• E01B 3/46 - Transverse or longitudinal sleepersOther means resting directly on the ballastway for supporting rails made from different materials
• B29C 43/00 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor
• B29C 43/18 - Compression moulding, i.e. applying external pressure to flow the moulding materialApparatus therefor of articles of definite length, i.e. discrete articles incorporating preformed parts or layers, e.g. compression moulding around inserts or for coating articles
• B29K 23/00 - Use of polyalkenes as moulding material
• B29K 509/00 - Use of inorganic materials not provided for in groups , as filler
• B29K 705/12 - Iron

Abstract

<< 0.03%, and, as the rest, iron and unavoidable impurities, wherein the amount of the sum of impurities is limited to at most 0.2 % and the impurities include up to 0.025% P and up to 0.025% S. The spring wire according to the invention is suitable in particular for producing a tension clamp having optimised usage properties. The invention also discloses a method that enables spring wires according to the invention to be produced in a practical manner.

IPC Classes  ?

• C21D 8/06 - Modifying the physical properties by deformation combined with, or followed by, heat treatment during manufacturing of rods or wires
• C21D 9/02 - Heat treatment, e.g. annealing, hardening, quenching or tempering, adapted for particular articlesFurnaces therefor for springs
• C21D 9/52 - Heat treatment, e.g. annealing, hardening, quenching or tempering, adapted for particular articlesFurnaces therefor for wiresHeat treatment, e.g. annealing, hardening, quenching or tempering, adapted for particular articlesFurnaces therefor for strips
• C22C 38/02 - Ferrous alloys, e.g. steel alloys containing silicon
• C22C 38/04 - Ferrous alloys, e.g. steel alloys containing manganese
• E01B 9/28 - Fastening on wooden or concrete sleepers or on masonry with clamp members

Goods & Services

Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; ironmongery, small items of metal hardware; pipes and tubes of metal, safes, goods of common metal, included in this class; beacons of metal, non-luminous; turntables (railways); railway sleepers of metal, screw rings; railway switches; boarding stairs of metal; loading gauge rods, of metal, for railway wagons; railway tracks; masts of metal; pallets of metal for handling, loading and transport; stops of metal; pipes and pipelines of metal; fish plates (rails); signs (non luminous and non-mechanical) of metal; steel structures; tanks of metal; frames of metal for buildings; plates of metal for attaching rails for railway vehicles, in particular guide plates, pressure dispense plates, packing plates, base plates, support plates, protection plates, ribbed plates; springs of metal for attaching rails for railway vehicles, in particular tension clamps and coils springs; gauge adjustment rails, sockets and wedges of metal for attaching rails for railway vehicles; assembly hooks of metal for attaching rails for railway vehicles; clamps of metal for attaching rails for railway vehicles; covers of metal for attaching rails for railway vehicles; parts for the aforesaid goods as far as included in this class. Unprocessed and semi-processed rubber, gutta-percha, gum, asbestos, mica and substitutes for all these materials; semi-worked plastic substances; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastics in extruded form used in production. Building materials (non-metallic); non-metallic rigid pipes for building; asphalt, pitch and bitumen; non-metallic transportable buildings; reinforcing materials, not of metal, for building; beacons, not of metal, non-luminous, concrete building elements; xylolith; railway sleepers, not of metal; windows, doors, not of metal; masts of non-metallic materials; signalling panels and signals, non-luminous and non-mechanical, not of metal; posts, not of metal, for electric power lines; tanks of masonry; framework, not of metal; wall linings, not of metal, for building; plates as building material, not of metal for attaching rails for railway vehicles, in particular guide plates, pressure dispense plates, elastic distance plates, packing plates, base plates, support plates, protection plates, ribbed plates; gauge adjustment rails, sockets and wedges, not of metal, for attaching rails for railway vehicles; covers, not of metal, for rail fastenings; supporting strips and supporting gantries, not of metal; parts for the aforesaid goods as far as included in class this. Furniture, mirrors, picture frames; goods (included in this class) of wood, cork, reed, cane, wicker, horn, bone, ivory, whalebone, shell, amber, mother-of-pearl, meerschaum and substitutes for all these materials, or of plastics; loading gauge rods, not of metal, for railway wagons; plates, not of metal (registration -) for vehicles; conveying, loading and transport pallets, not of metal; tanks, not of metal or masonry; plugs, not of metal; clamps, not of metal, in particular rail mountings for holding attenuators.

Goods & Services

(1) Common metals and their alloys; metal building materials namely beams of common metal, building panels of metal, cladding of metal for building, flashing of metal for building, handrails of metal for use in building, lining of metal for building purposes, metal partitions for building, metal reinforcing materials for building, metal slabs for building, metal trim for building, pillars of metal for building, Bridge structures of metal, Doors of metal, Windows of metal, Fences of metal, Roof structures of metal, Roofs of metal, Metal boards for building purposes, Poles of metal; transportable buildings of metal namely greenhouses, sheds, portable classrooms and offices; materials of metal for railway tracks; non-electric cables and wires of common metal; ironmongery and small items of metal hardware namely nails of metal, bolts of metal, nuts of metal, screws of metal, cable clips of metal, pipe clips of metal; branching pipes of metal, water pipes of metal, metal gutter pipes, metal drain pipes, branching tubes of metal for pipelines, branching tubes of metal for buildings, safes; beacons of metal, non-luminous namely signboards of metal; railway turntables of metal; railway sleepers of metal, screw rings; railway switches; boarding stairs of metal; loading gauge rods, of metal, for railway wagons; railway tracks; masts of metal; pallets of metal for handling, loading and transport; stops of metal for pipes being end caps, stops of metal for tubes being end caps; pipelines of metal for the oil and gas industry; railway fishplates of metal; non-luminous, non-mechanical road signs of metal; steel structures namely beams of steel, building panels of steel, cladding of steel for building, flashing of steel for building, handrails of steel for use in building, lining of steel for building purposes, steel partitions for building, steel reinforcing materials for building, steel slabs for building, steel trim for building, pillars of steel for building, bridge structures of steel, roof structures of steel, steel boards and poles for construction purposes; fluid storage tanks of metal; frames of metal for buildings namely wall frames, door frames and window frames; plates of metal for attaching rails for railway vehicles, in particular guide plates, pressure dispense plates, packing plates, base plates, support plates, protection plates, ribbed plates; springs of metal for attaching rails for railway vehicles, in particular tension clamps and coils springs; gauge adjustment rails, sockets and wedges of metal for attaching rails for railway vehicles; assembly hooks of metal for attaching rails for railway vehicles; clamps of metal for attaching rails for railway vehicles; covers of metal for attaching rails for railway vehicles; (2) Unprocessed and semi-processed rubber, gutta-percha, gum, asbestos, mica and substitutes for all these materials namely asbestos; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastics in extruded form used in production (3) Non-metallic rigid pipes for building; asphalt, pitch and bitumen; non-metallic transportable buildings namely greenhouses, sheds, portable classrooms and offices; reinforcing materials, not of metals, for building; beacons, not of metal, non-luminous namely non-luminous concrete beacon towers, concrete building elements namely building structures of concrete being concrete bollards, concrete flooring, concrete panels, concrete partitions for building, concrete paving blocks, concrete poles for building materials, concrete slabs for building, concrete walls for building; xylolith; railway sleepers, not of metal; fibreglass windows, plastic windows, vinyl windows, wooden windows, plastic doors, glass sliding doors, wood doors; masts of non-metallic materials for holding road signs; non-luminous, non-mechanical road signs of plastic composite; posts, not of metal, for electric power lines; liquid storage tanks of masonry for industrial purposes; structural framework of concrete for buildings; wall linings, not of metal, for building; plates as building material, not of metal for attaching rails for railway vehicles, in particular guide plates, pressure dispense plates, elastic distance plates, packing plates, base plates, support plates, protection plates, ribbed plates; gauge adjustment rails, sockets and wedges, not of metal, for attaching rails for railway vehicles; covers, not of metal, for rail fastenings; supporting strips and supporting gantries, not of metal; (4) Kitchen furniture, living room furniture, office furniture, bedroom furniture, bathroom furniture, outdoor furniture, Armchairs, Couches, Headrests for furniture, Bassinets, Cradles, Cots, Cot bumper guards, Baby change tables, Highchairs, Playpens, furniture benches, Wardrobes, Cupboards, Chests of drawers made of plastic, Chests of drawers made of wood, Chests of drawers made of metal, Chairs, Dining tables, Glass tables, Writing tables, Dressing tables, Office tables, Wheeled tables and Cooking tables, mirrors, picture frames; loading gauge rods, not of metal, for railway wagons; vehicle license plates of plastic; conveying, loading and transport pallets, not of metal; polyethylene liquid storage tanks for industrial purposes; plugs, not of metal namely, bridge plugs and fracturing plugs composed of plastic and synthetic rubber for use in the oil and gas industry, wooden stoppers for industrial packaging containers; clamps, not of metal, in particular rail mountings for holding attenuators

Goods & Services

Common metals and their alloys; metal building materials in the nature of soffits and fascia; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; small items of metal hardware, namely, nuts, bolts, screws, washers, and springs; pipes and tubes of metal; metal safes; beacons of metal, non-luminous; metal railway turntables; railway sleepers of metal; screw rings of metal; railway switches in the nature of railway points; boarding stairs of metal; loading gauge rods, of metal, for railway wagons; metal railway tracks; masts of metal; pallets of metal for handling, loading and transport; metal door stops; metal gate stops; branching tubes of metal for pipelines; pipes of metal including those from alloy steel; metal fish plates in the nature of hardware for fastening rails; non-luminous and non-mechanical metal signs ; steel structures in the nature of steel masts; metal storage tanks; frames of metal for buildings; metal fastening hardware plates for attaching railway rails in the nature of guide plates, pressure dispense plates, packing plates, base plates, support plates, protection plates, and ribbed plates; metal hardware, namely clamps and coil springs for attaching railway rails; gauge adjustment rails, sockets and wedges of metal for attaching rails for railway vehicles; assembly hooks of metal for attaching railway rails; clamps of metal for attaching railway rails; covers of metal specially adapted for use with metal railway rails; component parts for the aforesaid goods Unprocessed and semi-processed rubber, gutta-percha, gum, asbestos, mica and substitutes for all these materials; semi-worked plastic substances; extruded plastics in the form of pellets for use in manufacture; extruded plastics in the form of bars for use in manufacture; extruded plastics in the form of blocks for use in manufacture; extruded plastics in the form of rods for use in manufacture; extruded plastics in the form of tubes for use in manufacture; extruded plastics in the form of sheets for use in manufacture; plastics in extruded form for use in manufacture; plastics in extruded form used in production Building materials not of metal in the nature of soffits, fascia, and masts; non-metallic rigid pipes for building; asphalt, pitch and bitumen; non-metallic transportable buildings; reinforcing materials, not of metal, for building; non-luminous and non-metal beacons; non-metal construction materials, namely, xylolith; railway sleepers, not of metal; windows and doors, not of metal; masts of non-metallic materials; non-luminous and non-mechanical signs, not of metal; posts, not of metal, for electric power lines; wall linings, not of metal, for building; building materials, namely, composite panels composed primarily of nonmetal materials for attaching railway tracks; construction elements not made of metal, namely, supporting strips and supporting gantries; component parts for the aforesaid goods Furniture; mirrors; picture frames; loading gauge rods, not of metal, for railway wagons; registration plates, not of metal for vehicles; conveying, loading and transport pallets, not of metal; plastic and wood storage tanks; oil and gas well equipment, namely, bridge plugs and fracturing plugs composed of plastic and synthetic rubber for controlling pressure or fluids downhole; clamps, not of metal, in particular rail mountings for holding attenuators

Goods & Services

Boards and panels as building material, not of metal, for attaching railway tracks, in particular resilient connecting panels, entry boards, load distribution flaps, support panels, foundation slab, support plates, protective plates, ribbed plates; gauge adjustment rails, sockets and wedges, not of metal, for attaching rails for railway vehicles; covers, not of metal for rail fastenings for railway vehicles; supporting strips and supporting gantries, not of metal; framework, not of metal; wall linings not of metal; parts of the aforesaid goods included in this class.

Goods & Services

Boards and panels as building material, not of metal, for attaching railway tracks, in particular resilient connecting panels, entry boards, load distribution flaps, support panels, foundation slab, support plates, protective plates, ribbed plates; gauge adjustment rails, sockets and wedges, not of metal, for attaching rails for railway vehicles; covers, not of metal for rail fastenings for railway vehicles [ ; supporting strips and supporting gantries, not of metal; framework, not of metal; wall linings not of metal ]