09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
37 - Construction and mining; installation and repair services
42 - Scientific, technological and industrial services, research and design
Goods & Services
Mechanism actuators; actuators for valves; control cables
for machines, engines or motors; control mechanisms for
machines, engines or motors; transmission chains for
machines; transmission shafts for land vehicles; gear
transmissions, for land vehicles; transmission units, for
land vehicles; impellers for machines; actuators for valves;
machine parts, specifically door opening and closing
mechanisms; electric door openers; electric devices for
opening and closing doors used in land vehicles; electric
motors for use with doors; electronic door-closing systems;
electronic door opening devices; air blowers, air blowers;
air compressors for vehicles; intake manifolds for motor
vehicles; car washing installations; car washing machines,
electric cleaning machines and apparatus; regulators [parts
of machines]; flow-controlled pumps; dispensing valves as
machine parts; dispensing pumps; distributor manifolds being
parts of machines, engines or motors; electric washing
machines; electric water pumps, for land vehicles; electric
motor pumps, for land vehicles; electric alternators for
land vehicles; electric actuators for machines [electric
vehicles]; generators of electricity; generators of
electricity; electric propulsion mechanisms, for land
vehicles; electric actuators for machines [land vehicles];
electricity generators, for land vehicles; electronic
starters for engines; machine tools; mechanical tools;
motors and engines, other than for land vehicles; couplings
and transmission components (other than for land vehicles);
ignition cables for motor vehicles; air compressors; air
compressors for vehicle compressed air systems; water pumps;
water pumps for land vehicles; mechanical drive cables for
vehicles, in particular accelerator cables, gearbox cables,
speed control cables, cold start system cables; engine
starter pinions for land vehicles. Scientific, optical, measuring and checking apparatus and
instruments, for motor vehicles, as far as those products
mentioned are included in this class; antennas; display
systems for vehicles; odometer cables; electric cables for
vehicles; telematics systems, for vehicles; electric pumps
for fluid propulsion in vehicles; electronically
downloadable software, in particular software for use in the
following fields, development of automotive parts and
components; hardware and software systems for implementing
algorithms and artificial intelligence models in the
following fields, development of automotive parts and
components; software, algorithms, computer programs and
artificial intelligence applications in the following
fields, development of automotive parts and components;
hardware for artificial intelligence processing in the
following fields, development of automotive parts and
components; electric locks; software, in the following
fields, development of automotive parts and components;
automobile antennas; antennas and components thereof;
software relating to artificial intelligence and machine
learning in the following fields, development of automotive
parts and components; interactive software based on
artificial intelligence in the following fields, development
of automotive parts and components; artificial intelligence
software for vehicles in the following fields, development
of automotive parts and components; artificial intelligence
software in the following fields, development of automotive
parts and components; cameras [photography]; cameras for
vehicles; dashboard cameras; onboard cameras; reversing
cameras for vehicles; blind spot cameras for vehicles; flash
lights. Apparatus for lighting, heating, cooling, refrigerating,
drying, ventilating and water supply, in particular for
vehicles; indicators and safety lights for vehicles, in
particular for attachment and use in rear-view mirrors;
headlights for vehicles; lights for vehicles; vehicle
reflectors; heaters for vehicles; defrosting devices for
vehicles; frost-protection heating devices for vehicles;
fans for use in vehicles; taillights for vehicles; dynamo
lights for vehicles; air conditioning installations for
vehicles; space heaters for vehicles; brake lights for
vehicles; motor vehicle lights; lighting apparatus for
vehicles; headlights for vehicles and reflectors; air
intakes [vents] for vehicles; light bulbs for directional
signals for vehicles; ventilation installations
[air-conditioning] for vehicles; anti-glare devices for
vehicles [lamp fittings]; HVAC installations for vehicles
(heating, ventilation and cooling); air purifying apparatus
installed in vehicles; cooling systems for motor vehicles;
heating systems for motor vehicles. Parts and accessories for land vehicles; anti-glare devices;
internal and external mirrors and components of mirrors;
screens for protecting eyesight; indicator lights;
windshield wiper and headlight cleaning systems; fluid pumps
and fluid tanks, for vehicles; plastic parts and components
for vehicles; valves and nozzles; mechanisms and systems for
vehicle seats and doors; manual and/or electric parking
brake systems for vehicles; gear shift levers and gear box
for land vehicles; hand brake wire; motors and engines for
land vehicles; gearboxes for land vehicles; starter motors
for land vehicles; propulsion mechanisms for land vehicles;
driving motors for land vehicles; roller chains for land
vehicles; electric motors for land vehicles; motor drive
units for land vehicles; coupling rings [non-electric]
[parts of engines for land vehicles ]; vehicle fenders;
vehicle chassis; hoods for vehicles; sleeping berths for
vehicles; axles for vehicles; vehicle brakes; vehicle doors;
vehicle seats; windows for vehicles; bodies for vehicles;
steering wheels for vehicles; headrests for vehicles;
vehicle underbodies; vehicle covers; suspensions for
vehicles; shock absorbers for vehicles; bearings for
vehicles; glove boxes for vehicles; chassis for vehicles;
hydraulic circuits for vehicles; semi-fitted covers for
vehicles; lifting platforms for vehicles; interior panels
for vehicles; anti-glare devices for vehicles; electronic
brakes for vehicles; bearings [vehicle parts]; parts and
components for land vehicles; vehicle fuel tank caps;
springs for vehicle suspension systems; steering lever sets
for vehicles; backs adapted for use in vehicles; disc brake
pads for vehicles; leather upholstery for vehicle seats;
caps for oil tanks for vehicles; cup holders for use in
vehicles; pressure air pumps [vehicle accessories]; shock
absorbers for the vehicle suspension units; wheels, tires
and stepless transmission chains for vehicles; anti-theft
devices, safety devices and equipment for vehicles;
containers adapted for use in vehicle interiors; braking
systems for vehicles and parts therefor; air shock absorbers
for vehicle suspension components for damping driver seats
and cabins; brake disc rotors for vehicle braking systems;
organizers for behind the seats adapted for use in vehicles;
mirrors for vehicles; air pumps [vehicle accessories];
headrests for vehicle seats; child safety seats for
vehicles; seat covers for vehicles; cushions for vehicle
seats; seat covers for cars; vehicle seat subsystems; backs
for vehicle seats; harnesses for car seats; safety seats for
vehicles; upholstery for vehicle seats; car seat boosters
for pets; car safety seats for children; air springs for
damping of drivers' seats; seat belt covers for vehicle
seats; safety restraints for use in vehicles; vehicle safety
harnesses for safety seats for children; reversing sound
alarms for vehicles; electric apparatus for changing gears
of engines for land vehicles. Repair and maintenance of computer and telecommunications
hardware; consultancy regarding installation, maintenance
and repair of computer hardware; installation and
maintenance of computer hardware for computer networks and
Internet access; consultancy concerning information
technology relating to the installation, maintenance and
repair of hardware; maintenance and repair of land vehicles. Engineering services, in relation the following goods, parts
and components for vehicles; research, design and
development of motor vehicle parts and components;
electronic development and software development services, in
particular software for use in the following fields,
development of automotive parts and components; research
services, in the following fields, development of automotive
parts and components; software development, in the following
fields, development of automotive parts and components;
engineering services; computer engineering services;
technological engineering analysis; telecommunications
engineering; engineering consultancy services; engineering
of computer programs in the following fields, development of
automotive parts and components; consultancy services
regarding engineering and technical design; conducting of
engineering surveys; engineering services for third parties;
design of engineering products; design services for computer
aided engineering; engineering services related to robotics;
engineering services relating to computer programming;
application engineering services in large and medium-sized
computer systems; design of automobiles; vehicle
roadworthiness testing; design services for furniture for
the interiors of automobiles; crash testing for automobiles;
design of land vehicles; design of vehicles and vehicle
parts and components; design and development of computer
software for vehicle simulation; industrial research;
technological research in the following fields, development
of automotive parts and components; mechanical research;
engineering research; industrial analysis and research
services; technological research conducted by engineers;
computer-aided industrial research services; providing
information about industrial analysis and research services;
research and consultancy services concerning the design and
development of hardware; research and consultancy services
relating to software for computers in the following fields:
development of automobile parts and components; consultancy
concerning artificial intelligence in the following fields,
development of automotive parts and components; providing
artificial intelligence programs on data networks in the
following fields, development of automotive parts and
components; technological consultancy, in the following
fields, artificial intelligence in the following fields,
development of automotive parts and components; platforms
for artificial intelligence as software as a service [SaaS]
in the following fields, development of automotive parts and
components; research services, in the following fields,
artificial intelligence technology in the following fields,
development of automotive parts and components.
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Mechanism actuators; actuators for valves; control cables for machines, engines or motors; control mechanisms for machines, engines or motors; transmission chains for machines; transmission shafts for land vehicles; gear transmissions, for land vehicles; transmission units, for land vehicles; impellers for machines; actuators for valves; machine parts, specifically door opening and closing mechanisms; electric door openers; Electric devices for opening and closing doors used in land vehicles; electric motors for use with doors; electronic door-closing systems; electronic door opening devices; air blowers, air blowers; air compressors for vehicles; intake manifolds for motor vehicles; car washing installations; car washing machines, electric cleaning machines and apparatus; regulators (parts of machines); flow-controlled pumps; dispensing valves as machine parts; dispensing pumps; distributor manifolds being parts of machines, engines or motors; electric washing machines; electric water pumps, for land vehicles; electric motor pumps, for land vehicles; electric alternators for land vehicles; electric actuators for machines (electric vehicles); generators of electricity; generators of electricity; electric propulsion mechanisms, for land vehicles; electric actuators for machines (land vehicles); electricity generators, for land vehicles; electronic starters for engines; machine tools; mechanical tools; motors and engines, other than for land vehicles; couplings and transmission components (other than for land vehicles); ignition cables for motor vehicles; air compressors; air compressors for vehicle compressed air systems; Water pumps; water pumps for land vehicles; mechanical drive cables for vehicles, in particular accelerator cables, gearbox cables, speed control cables, cold start system cables; engine starter pinions for land vehicles Apparatus for lighting, heating, cooling, refrigerating, drying, ventilating and water supply, in particular for vehicles; indicators and safety lights for vehicles, in particular for attachment and use in rear-view mirrors; headlights for vehicles; lights for vehicles; vehicle reflectors; heaters for vehicles; defrosting devices for vehicles; frost-protection heating devices for vehicles; fans for use in vehicles; taillights for vehicles; dynamo lights for vehicles; air conditioning installations for vehicles; space heaters for vehicles; brake lights for vehicles; motor vehicle lights; lighting apparatus for vehicles; headlights for vehicles and reflectors; air intakes (vents) for vehicles; light bulbs for directional signals for vehicles; ventilation installations (air-conditioning) for vehicles; anti-glare devices for vehicles (lamp fittings); HVAC installations for vehicles (heating, ventilation and cooling); air purifying apparatus installed in vehicles; cooling systems for motor vehicles; heating systems for motor vehicles Parts and accessories for land vehicles; anti-glare devices; internal and external mirrors and components of mirrors; screens for protecting eyesight; indicator lights; windshield wiper and headlight cleaning systems; fluid pumps and fluid tanks, for vehicles; plastic parts and components for vehicles; valves and nozzles; mechanisms and systems for vehicle seats and doors; manual and/or electric parking brake systems for vehicles; gear shift levers and gear box for land vehicles; hand brake wire; motors and engines for land vehicles; gearboxes for land vehicles; starter motors for land vehicles; propulsion mechanisms for land vehicles; driving motors for land vehicles; roller chains for land vehicles; electric motors for land vehicles; motor drive units for land vehicles; coupling rings (non-electric) (parts of engines for land vehicles ); vehicle fenders; vehicle chassis; hoods for vehicles; sleeping berths for vehicles; axles for vehicles; vehicle brakes; vehicle doors; vehicle seats; windows for vehicles; bodies for vehicles; steering wheels for vehicles; headrests for vehicles; vehicle underbodies; vehicle covers; suspensions for vehicles; shock absorbers for vehicles; bearings for vehicles; glove boxes for vehicles; chassis for vehicles; hydraulic circuits for vehicles; semi-fitted covers for vehicles; lifting platforms for vehicles; interior panels for vehicles; anti-glare devices for vehicles; electronic brakes for vehicles; bearings (vehicle parts); parts and components for land vehicles; vehicle fuel tank caps; springs for vehicle suspension systems; steering lever sets for vehicles; backs adapted for use in vehicles; disc brake pads for vehicles; leather upholstery for vehicle seats; caps for oil tanks for vehicles; cup holders for use in vehicles; pressure air pumps (vehicle accessories); shock absorbers for the vehicle suspension units; wheels, tires and stepless transmission chains for vehicles; anti-theft devices, safety devices and equipment for vehicles; containers adapted for use in vehicle interiors; braking systems for vehicles and parts therefor; air shock absorbers for vehicle suspension components for damping driver seats and cabins; brake disc rotors for vehicle braking systems; organizers for behind the seats adapted for use in vehicles; mirrors for vehicles; air pumps (vehicle accessories); headrests for vehicle seats; child safety seats for vehicles; seat covers for vehicles; cushions for vehicle seats; seat covers for cars; vehicle seat subsystems; backs for vehicle seats; harnesses for car seats; safety seats for vehicles; Upholstery for vehicle seats; car seat boosters for pets; car safety seats for children; air springs for damping of drivers' seats; seat belt covers for vehicle seats; safety restraints for use in vehicles; vehicle safety harnesses for safety seats for children; reversing sound alarms for vehicles; electric apparatus for changing gears of engines for land vehicles
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
37 - Construction and mining; installation and repair services
42 - Scientific, technological and industrial services, research and design
Goods & Services
Actuators for mechanisms; Actuators for valves; Control cables for machines, engines or motors; Control mechanisms for machines, engines or motors; Drive chains for machines; Drive shafts for land vehicles; Drive transmissions for land vehicles; Drive units for land vehicles; Drives for machines; Drives for valves; Door openers and closers [parts of machines]; Door openers, electric; Electric door openers-closers used in land vehicles; Electric motors for use with doors; Electronic door closing system; Electronic door openers; Air blowers, Air blowers machines; Air compressors for vehicles; Automotive intake manifolds; Car washing installations; Car washing machines, Cleaning (Machines and apparatus for -) electric; Control valves [parts of machines]; Controlled volume pumps; Dispensing valves being machine parts; Distribution pumps; Distributor manifolds being parts of machines, engines or motors; Electric washing machines; Electric water pumps [for land vehicles]; Electrical motor pump units [for land vehicles]; Electric alternators for land vehicles; Electric drives for machines [electric vehicles]; Electric generators; Electric power generators; Electric propulsion mechanisms for land vehicles; Electrical drives for machines [land vehicles]; Electrical generating machines [for land vehicles]; Electronic starters for engines; Machine tools; Mechanical tools; Motors, other than for land vehicles; Machine coupling and transmission components (except for land vehicles); Ignition wires for motor vehicles; Air compressors; Air compressors for vehicle compressed air systems; Water pumps; Water pumps for land vehicles; Mechanical drive cables for vehicles, in particular throttle cables, gear shift cables, speed control cables, choke cables. Scientific, optical, signaling and measuring and checking apparatus and instruments applicable to motor vehicles included in this class; Aerials; Vehicle Display Systems; Kilometer-counting cables; Electrical cables for vehicles; Vehicle telematics systems; Electric pumps for fluid propulsion in vehicles; Electronically downloadable software, in particular computer programs for use in the field of automotive parts and components development; Computer hardware and software systems for implementing artificial intelligence algorithms and models in the field of automotive parts and components development; Artificial intelligence software, algorithms, computer programs and applications in the field of automotive parts and components development; Computer hardware for artificial intelligence processing in the field of automotive parts and components development; Locks, electric; Software in the field of automotive parts and components development; Car aerials; Antennas and aerials as components; Artificial intelligence and machine learning software in the field of automotive parts and components development; Interactive software based on artificial intelligence in the field of automotive parts and components development; Artificial intelligence software for vehicles in the field of automotive parts and components development; Artificial intelligence software in the field of automotive parts and components development; Cameras [photography]; Cameras for vehicles; Dashboard cameras; Onboard cameras; Rearview cameras for vehicles; Blind spot cameras for cars; Flashing lights. Apparatus for lighting, heating, cooling, refrigerating, drying, ventilation and water distribution, in particular for use in vehicles; Indicator and safety lights applicable to vehicles, in particular for fitting and use in rear-view mirrors; Vehicle headlights; Lights for vehicles; Vehicle reflectors; Heaters for vehicles; Defrosters for vehicles; Heating apparatus for defrosting vehicle windows; Ventilating fans for use in vehicles; Taillights for vehicles; Dynamo lights for vehicles; Air conditioners for vehicles; Space heaters for vehicles; Brake lights for vehicles; Motor vehicle lamps; Lighting apparatus for vehicles; Vehicle lighting and lighting reflectors; Air inlets [vents] for vehicles; Light bulbs for directional signals for vehicles; Ventilation [air-conditioning] installations for vehicles; Anti-glare devices for vehicles [lamp fittings]; Vehicle HVAC systems (heating, ventilation and air conditioning); Vehicle-mounted air purifying apparatus; Cooling systems for motor cars; Heating systems for motor cars. Parts and accessories for land vehicles; Anti-dazzle devices; Interior and exterior mirrors and mirror components; Sun visors; Direction indicators; Windscreen wiper and headlamp washer systems; Vehicle fluid pumps and reservoirs; Plastic parts and components for vehicles; Valves and nozzles; Vehicle seat and door mechanisms and systems; Manual and/or electric parking brake systems for vehicles; Gear shift levers and gearboxes for land vehicles; Handbrake cables; Engines for land vehicles; Gear boxes for land vehicles; Starter motors for land vehicles; Propulsion mechanisms for land vehicles; Driving motors for land vehicles; Roller chains for land vehicles; Motors, electric, for land vehicles; Starter pinions for land vehicles; Motor drive units for land vehicles; Coupling rings (non-electric -) [parts of land vehicle engines]; Vehicle bumpers; Vehicle chassis; Hoods [folding roofs] for vehicles; Sleeping berths for vehicles; Axles for vehicles; Brakes for vehicles; Doors for vehicles; Vehicle seats; Windows for vehicles; Bodies for vehicles; Steering wheels for vehicles; Head restraints for vehicles; Underbodies of vehicle; Vehicle covers [shaped]; Suspensions for vehicles; Vehicle shock absorbers; Bushes for vehicles; Glove boxes for vehicles; Undercarriages for vehicles; Hydraulic circuits for vehicles; Semi-fitted covers for vehicles; Tail lifts for vehicles; Interior panels for vehicles; Anti-dazzle devices for vehicles; Electronic brakes for vehicles; Bearings [parts of vehicles]; Parts and fittings for land vehicles; Filler caps for vehicle fuel tanks; Springs for vehicle suspension systems; Steering linkages for vehicles; Backrests adapted for use in vehicles; Disc brake pads for vehicles; Leather upholstery for vehicle seats; Caps for vehicle fuel tanks; Cup holders for vehicles; Air pressure pumps [vehicle accessories]; Shock absorbers for the suspension units of vehicles; Wheels and tyres, and continuous tracks for vehicles; Anti-theft, security and safety devices and equipment for vehicles; Containers adapted for use in vehicle interiors; Braking systems for vehicles and parts thereof; Air springs for vehicle suspension components for cushioning driver's seats and cabs; Disc brake rotors for vehicle braking systems; Seat back organizers specially adapted for use in vehicles; Mirrors for vehicles; Air pumps [vehicle accessories]; Head-rests for vehicle seats; Safety seats for children, for vehicles; Seat covers for vehicles; Seat cushions for the seats of vehicles; Coverings for car seats; Vehicle seat subsystems; Backrests for vehicle seats; Car seat harnesses; Safety seats for vehicles; Upholstery for vehicle seats; Pet booster seats for automobiles; Car safety seats for children; Air springs for cushioning drivers seats; Safety belt covers for automobile seats; Safety restraints for use in vehicles; Vehicle safety harness for safety seats for children; Sound alarms (Reversing -) for vehicles; Electric gear shifting apparatus for land vehicle motors. Repair and maintenance of computer and telecommunications hardware; Consultancy relating to the installation, maintenance and repair of computer hardware; Installation and maintenance of hardware for computer networks and Internet access; Information technology consultancy relating to installation, maintenance and repair of computer hardware; Maintenance and repair of land vehicles. Engineering services of parts and components for vehicles; Research, development and design services of parts and components for motor vehicles; Electronic development services and software development services, in particular software for use in the field of automotive parts and components development; Research services in the field of automotive parts and components development; Software development in the field of automotive parts and components development; Engineering services; Engineering services relating to computers; Technological engineering analysis; Telecommunications engineering; Engineering consultancy services; Software engineering in the field of automotive parts and components development; Engineering design and consultancy; Conducting engineering surveys; Engineering services for others; Design of engineering products; Computer assisted engineering design services; Engineering services relating to robotics; Engineering services relating to computer programming; Engineering services for applications on large and medium-sized computer systems; Automotive design; Vehicle roadworthiness testing; Furnishing design services for the interiors of automobiles; Crash testing for automobiles; Design of land vehicles; Design of vehicles and vehicle parts and components; Design and development of computer software for vehicle simulation; Industrial research; Technological research in the field of automotive parts and components development; Mechanical research; Engineering research; Industrial analysis and research services; Research in the field of technology provided by engineers; Computer aided industrial research services; Providing information about industrial analysis and research services; Research and consultancy services relating to computer hardware; Research and consultancy services relating to computer software in the field of automotive parts and components development; Artificial intelligence consultancy in the field of automotive parts and components development; Providing artificial intelligence computer programs on data networks in the field of automotive parts and components development; Technology consultation in the field of artificial intelligence in the field of automotive parts and components development; Platforms for artificial intelligence as software as a service [SaaS] in the field of automotive parts and components development; Research in the field of artificial intelligence technology in the field of automotive parts and components development.
A vehicle lighting assembly may include a housing including a lower part, the lower part defining an opening; and a lighting device arranged within the housing and configured to emit light through the opening, the lighting device including at least one circuit board and a lens arranged on the circuit board, the lighting device further including a single overmolded encapsulate configured to encase the circuit board and at least a portion of the lens.
A shift lever assembly includes a shift lever, a folding device, and a fold interlock device. The shift lever is adapted to move between park and gear positions. The shift lever includes a base structure and an arm pivotally engaged to the base structure about a first axis. The folding device is adapted to pivotally move the arm with respect to the base structure about the first axis and between deployed and stowed states. The fold interlock device is adapted to move between locked and released positions, and includes a locking member adapted to abut the arm in a circumferential direction with respect to the first axis when in the locked position to prevent movement from the deployed state to the stowed state, and to circumferentially clear the arm when in the released position to enable actuation of the folding device from the deployed state to the stowed state.
A shift-by-wire (SBW) column shifter for a vehicle includes a shift lever configured to be moved to shift gears. A shaft enables the shift lever to rotate the shaft about an axis. A lever detent is coupled to the shaft, enabling the shaft to rotate the lever detent about the axis. A rotatable magnet rotates as the lever detent rotates. A magnetic sensor senses the angular position of the lever detent due to the changes in magnetic characteristics of the magnet as it rotates. A processor can command an operating gear change based on the signal output from the magnet sensor.
A visual aid winglet for a vehicle includes a visual aid, a housing, a base, and an articulating structure. The housing is adapted to house the visual aid. The articulating structure is engaged between the base and the housing and is adapted to pivot the housing with respect to the base. The articulating structure includes a metallic biasing member and a damper for the absorption of vibration.
In at least one embodiment, an exterior rearview winglet assembly for a vehicle is provided. The assembly includes an exterior shell, a base bracket, a first housing, a finisher, and a first electrical device. The exterior shell includes a first side orientated toward a front of the vehicle and a second side orientated toward a rear of the vehicle. The base bracket is positioned in the exterior shell to couple the exterior shell to the vehicle. The first housing is positioned in the exterior shell. The finisher is being attached to the first housing and extending from at least a portion of the exterior shell at the second side of the exterior shell. The first electrical device is directly attached to the first housing and the first electrical device is independent of attachment to the finisher.
B60R 1/06 - Rear-view mirror arrangements mounted on vehicle exterior
B60Q 1/00 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60R 1/072 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for adjusting the mirror relative to its housing
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60R 11/04 - Mounting of cameras operative during driveArrangement of controls thereof relative to the vehicle
F21S 43/20 - Signalling devices specially adapted for vehicle exteriors, e.g. brake lamps, direction indicator lights or reversing lights characterised by refractors, transparent cover plates, light guides or filters
The present disclosure refers to an antenna system vehicles, preferably for Vehicle-to-Everything (V2X) communications, comprising a planar reflector and a radiating element placed over the reflector, wherein the radiating element comprises segments, preferably straight segments, arranged to configure two connected quadrilateral frame antenna elements. Each quadrilateral frame antenna element having an inner pair of segments and an outer pair of segments, wherein the segments of the inner pairs are substantially parallel to the reflector, and the segments of the outer pairs are inclined with respect to the segments of the inner pairs. The segments of the outer pairs have one end connected with the reflector.
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H01Q 7/00 - Loop antennas with a substantially uniform current distribution around the loop and having a directional radiation pattern in a plane perpendicular to the plane of the loop
H01Q 9/46 - Resonant antennas with a plurality of divergent straight elements, e.g. V-dipole, X-antennaResonant antennas with a plurality of elements having mutually inclined substantially straight portions with rigid elements diverging from single point
A vehicle lamp system, may include a lamp housing arranged within a vehicle winglet; and an optical assembly arranged within an optical housing and configured to project an image on a surface exterior to the vehicle from the winglet, the optical assembly having the optical housing configured to receive at least one interchangeable film configured to produce the image, the optical housing defining a slot configured to receive the film.
B60Q 1/00 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor
B60Q 3/00 - Arrangement of lighting devices for vehicle interiorsLighting devices specially adapted for vehicle interiors
B60Q 11/00 - Arrangement of monitoring devices for devices provided for in groups
F21S 43/20 - Signalling devices specially adapted for vehicle exteriors, e.g. brake lamps, direction indicator lights or reversing lights characterised by refractors, transparent cover plates, light guides or filters
F21V 17/00 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60Q 1/24 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to illuminate the way ahead or to illuminate other areas of way or environments for lighting other areas than only the way ahead
F21W 103/60 - Projection of signs from lighting devices, e.g. symbols or information being projected onto the road
B60R 1/06 - Rear-view mirror arrangements mounted on vehicle exterior
A vehicle winglet (e.g., sideview mirror, camera or radar assembly, etc.) is provided with sequential illumination of light-emitting diodes (LEDs). A light guide is connected to and covers the LEDs. The light guide is made of a translucent material and is configured to guide light illuminated by the LEDs and transfer the light out of the light guide. The light guide includes a plurality of light guide towers extending therefrom. Each light guide tower is aligned with a respective one of the LEDs. In some embodiments, a plurality of collimators are provided, with each collimator aligned with a respective one of the LEDs and with a respective one of the light guide towers to redirect the light illuminated from the respective LED into the respective light guide tower.
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
A shift-by-wire (SBW) column shifter for a vehicle includes a shift lever configured to be moved to shift gears. A shaft enables the shift lever to rotate the shaft about an axis. A lever detent is coupled to the shaft, enabling the shaft to rotate the lever detent about the axis. A slider magnet is constrained to move along a path, such as a linear path. The slider magnet has a groove that is engaged by a projection of the lever detent. Rotation of the lever detent about the axis is converted into movement of the slider magnet along the path via the engagement of the projection and the groove. A plurality of sensors are configured to output signals indicating a position of the slider magnet along the path to indicate a requested change in operating gear of the vehicle.
A high frequency antenna carrier in vehicle roof cross member is provided. The antenna carrier is configured to extend width-wise across a vehicle roof to provide structural support for the vehicle roof. The antenna carrier has a lower surface, and a plurality of sidewalls that meet at a common upper flange that mates in a face-to-face relationship with the vehicle roof. The sidewalls may be provided with apertures to facilitate a strong signal passage to and from the high frequency antenna through the carrier. The lower surface of the antenna carrier may be provided with apertures that are aligned with the antennas to improve signal strength.
A dual broadband and multiband antenna system of reduced dimension is preferably an external antenna for vehicles. The antenna system comprises first and second radiating elements and a flat ground plane in common for the two radiating elements. The two radiating elements are placed above the ground plane, with each radiating element being folded to form vertical and horizontal surfaces. The two vertical surfaces are orthogonal to the ground plane and parallel to each other. The horizontal surfaces are coplanar between vertical surfaces and parallel to the ground plane. Two parasitic elements are connected with the ground plane, and are parallel or coplanar with the horizontal surfaces, and extend partially around respectively the first and second radiating elements. The antenna system is preferably adapted to operate on the LTE communication network and provides 5G communication services.
H01Q 9/42 - Resonant antennas with feed to end of elongated active element, e.g. unipole with folded element, the folded parts being spaced apart a small fraction of the operating wavelength
An under-roof antenna module for a vehicle includes a metallic frame with at least one perforation, and at least one transceiver. The at least one transceiver is arranged at portions of the frame proximal to the at least one perforation.
A dual broadband and multiband antenna system of reduced dimension may be used as external antenna for vehicles. The antenna system includes first and second radiating elements and a flat ground plane in common with the two radiating elements. The two radiating elements are placed above an upper surface of the ground plane, and each radiating element is folded and has a vertical and horizontal surface. The vertical surfaces of the two radiating elements are substantially orthogonal to the ground plane and substantially parallel to each other. The horizontal surfaces of the two radiating elements are substantially coplanar and substantially parallel to the ground plane. The antenna system is preferably adapted to operate on the LTE communication network and provides 5G communication services.
H01Q 1/52 - Means for reducing coupling between antennas Means for reducing coupling between an antenna and another structure
H01Q 9/42 - Resonant antennas with feed to end of elongated active element, e.g. unipole with folded element, the folded parts being spaced apart a small fraction of the operating wavelength
A dual broadband and multiband antenna system of reduced dimension is preferably an external antenna adapted for vehicles. The antenna system comprises first and second radiating elements and a common ground plane for the first and second radiating elements. The ground plane comprises at least three planes, wherein a first and a second planes are parallel to each other, and wherein a third plane is connected with the first and second planes and it is orthogonally arranged with respect to the first and second planes. The first and second planes extend from the third plane in opposite directions so as to define generally a Z shape in a cross-sectional view. The antenna system is preferably adapted to operate on the LTE communication network.
A vehicle illumination system for illuminating a path to a vehicle may include a light mechanism arranged on the vehicle, at least one antenna configured to detect a unique device of an approaching user; and at least one controller. The controller may be configured to determine a user location based on the detected unique device, predict the path based at least in part on the user location, and instruct the light mechanism to illuminate an area along the path.
B60Q 1/24 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to illuminate the way ahead or to illuminate other areas of way or environments for lighting other areas than only the way ahead
F21S 41/657 - Illuminating devices specially adapted for vehicle exteriors, e.g. headlamps characterised by a variable light distribution by acting on light sources by moving light sources
A broadband LTE antenna system for a vehicle, comprising a main LTE antenna system and a secondary LTE antenna, both antennas being arranged relative to each other, such as their radiation patterns are perpendicular to each other wherein the main LTE antenna comprises a ground plane circumscribed by a rectangle having major and minor sides, a dielectric substrate comprising a first portion area, a radiating element for operating at a frequency band and having at least three angles and three sides, a first side being substantially aligned with one side of the rectangle, and a first angle having an apex being the closest point of the radiating element to the ground plane, and a conductive element having at least a first portion extending between the radiating element and one side of the first portion area.
H01Q 5/378 - Combination of fed elements with parasitic elements
H01Q 9/40 - Element having extended radiating surface
H01Q 21/28 - Combinations of substantially independent non-interacting antenna units or systems
H01Q 5/335 - Individual or coupled radiating elements, each element being fed in an unspecified way using frequency dependent circuits or components, e.g. trap circuits or capacitors at the feed, e.g. for impedance matching
H01Q 1/38 - Structural form of radiating elements, e.g. cone, spiral, umbrella formed by a conductive layer on an insulating support
H01Q 1/52 - Means for reducing coupling between antennas Means for reducing coupling between an antenna and another structure
An external side mirror is pivotable relative to a vehicle to which it is attached. The external side mirror includes an outer cover, and a housing bracket within the outer cover. The housing bracket is mounted or attached to the outer cover. A gasket is removably attached to the underside of the housing bracket. The gasket has a plurality of hooks that extend upwardly and attach to the housing bracket. Support ribs extending from the outer cover trap the hooks against the housing bracket. This allows the gasket to pivot along with the external side mirror relative to the vehicle to keep the gasket hidden from view even when the external side mirror is pivoted.
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
F16J 15/08 - Sealings between relatively-stationary surfaces with solid packing compressed between sealing surfaces with exclusively metal packing
B60R 1/072 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for adjusting the mirror relative to its housing
21.
Antenna system and side mirror for a vehicle incorporating said antenna
Antenna system adapted for integration in side mirrors of a vehicle. The antenna system includes two radiating conductors and a reflector coplanarly disposed on a same dielectric substrate of a printed circuit board. The radiating conductors are connected to the reflector through transmission lines electromagnetically coupled to a frequency band of operation. In order to optimize the radiating of the antenna system in a 180° sector that covers one lateral of the vehicle, the reflector is separated from the two radiating conductors by a distance included between 0.3 times and one time the central wavelength; and the reflector is less than 6 times wider than the radiating conductors.
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H01Q 19/10 - Combinations of primary active antenna elements and units with secondary devices, e.g. with quasi-optical devices, for giving the antenna a desired directional characteristic using reflecting surfaces
H01Q 9/16 - Resonant antennas with feed intermediate between the extremities of the antenna, e.g. centre-fed dipole
H01Q 9/28 - Conical, cylindrical, cage, strip, gauze or like elements having an extended radiating surface Elements comprising two conical surfaces having collinear axes and adjacent apices and fed by two-conductor transmission lines
A shift lever assembly includes a structural support, a shift lever, an autopark device, a folding device, and an interlock device. The shift lever includes a base structure and an arm. The base structure is pivotally engaged to the structural support about a first axis for movement between a park and gear positions. The arm is pivotally engaged to the base structure about a second axis for movement between deployed and stowed states. The autopark device is carried between the structural support and the base structure to effect movement between the park and gear positions. The folding device is carried between the arm and the base structure to effect movement between the deployed and stowed states. The interlock device is supported by the base structure, is adapted to operable interface between the autopark device and the arm, and is configured to move between locked and released positions.
A broadband and multiband antenna of reduced dimension, preferably to be used as external antenna for vehicles is disclosed. The antenna system includes an antenna comprising: a planar ground plane, a planar radiating element having a configuration formed by a central segment and first and second lateral segments extending from the central segment. A feed connection line is connected between the central segment and an edge of the ground plane, and a ground connection line is connected between the central segment and said edge of the ground plane.
H01Q 21/28 - Combinations of substantially independent non-interacting antenna units or systems
H01Q 9/42 - Resonant antennas with feed to end of elongated active element, e.g. unipole with folded element, the folded parts being spaced apart a small fraction of the operating wavelength
H01Q 5/30 - Arrangements for providing operation on different wavebands
H01Q 1/24 - SupportsMounting means by structural association with other equipment or articles with receiving set
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H01Q 21/06 - Arrays of individually energised antenna units similarly polarised and spaced apart
Antenna modules for vehicles are disclosed. The antenna modules may be arranged on elongated bases and may be configured to be mounted in 5 cavities of top parts of vehicles. They may comprise a plurality of antennas distributed along the elongated bases. The plurality of antennas may comprise at least multiple-input multiple-output (MIMO) mobile communications antennas and global navigation satellite system (GNSS) antennas.
A vehicle image processing system including a control unit and a display unit. The control unit processes an image of the exterior of the vehicle. The display unit displays at least a part of the image. The control unit operates the display unit in first and second modes. The first mode displays at least a part of the image, and the second mode displays at least first and second adjacent regions. The second region is located at least in a lateral end of the display unit, where in the first region the display unit displays part of the image displayed in the first mode, and in the second region the display unit removes the part of the image not displayed in the first region.
B60R 1/00 - Optical viewing arrangementsReal-time viewing arrangements for drivers or passengers using optical image capturing systems, e.g. cameras or video systems specially adapted for use in or on vehicles
H04N 5/262 - Studio circuits, e.g. for mixing, switching-over, change of character of image, other special effects
G06K 9/00 - Methods or arrangements for reading or recognising printed or written characters or for recognising patterns, e.g. fingerprints
A broadband antenna system for a vehicle, comprising a ground plane circumscribed by a rectangle having major and minor sides, a dielectric substrate comprising a first portion area, a radiating element for operating at a frequency band and having at least three angles and three sides, a first side being substantially aligned with one side of the rectangle, and a first angle having an apex being the closest point of the radiating element to the ground plane, and a conductive element having at least a first portion extending between the radiating element and one side of the first portion area, wherein each major side has an electric length of at least 0.13λ, being λ the lowest frequency of the antenna system, and the first angle having an aperture lower than 156°.
An automotive electrical wiring connector for being inserted through a interior of a hollow shaft. It comprises a body having at least one receiving portion for an electrical conductor end that is adapted for being connected to another electrical conductor end, and a lid for covering the electrical conductor receiving portion. The lid is suitable to be in at least one operating position in which the lid is closed to the body and retaining the at least one electrical conductor therein while retaining the connector body through the interior of the hollow shaft, and in at least one non-operating position in which the lid is open for allowing the at least one electrical conductor to be accessed and released.
A fold rearview mirror assembly for a motor vehicle comprises a base member, a mirror head, and a motor component for rotating, through a drive means comprising a gear wheel assembly, the mirror housing relative to the base member between a mirror operative condition and a mirror folded condition, and vice versa. The gear wheel assembly comprises a first and second gear wheels coupled to each other through first coupling means. The first gear wheel engages a motor component through a second coupling means and the second gear wheel in turn engages the base member through a third coupling means. The first coupling means allow the first and second gear wheels to be rotated together in one direction, and allow the first gear wheel to be rotated relative to the second gear wheel in the reverse direction.
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
B60R 1/064 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by manually powered actuator
An antenna for motor vehicles is provided having a base member, an antenna device, a radome, and a device for attaching the base member to a vehicle roof inside surface with the antenna device projecting outwards of the vehicle from within through an opening formed in the vehicle. The radome cooperates with the attaching device and the surroundings of the vehicle opening so as to enclose the antenna device in an assembled condition.
A rear-view mirror assembly comprises a fixed base member, a mirror housing that can be rotated relative to the base member, a shaft, an elastic element for applying a force on the base member and the mirror housing through the shaft, shaft axially retaining means, and safety means for preventing the shaft from being released comprising a first and second stop portions formed in the mirror housing and the shaft respectively and arranged such that in different shaft angular positions the first and the second stop portions do not interfere with one another such that the shaft can be inserted in the shaft housing, or the first and second stop portions interfere with one another preventing the shaft from being released from the shaft housing by the action of the elastic element in case of failure of the shaft retaining means.
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60R 1/076 - Rear-view mirror arrangements mounted on vehicle exterior yieldable to excessive external force and provided with an indexed use position
A foldable rear-view mirror assembly comprises a base member to be mounted on a motor vehicle, a mirror housing, a motor component, drive means comprising a ring gear assembly engaging the motor component with the base member for rotation of the mirror housing thereto between mirror operative and folded conditions, and a spring element positioned substantially tangential to the ring gear assembly to cooperate therewith such that in a first direction of rotation the mirror housing is allowed to rotate to the base member and in a second reverse direction of rotation the mirror housing is prevented from being rotated relative to the base member, where the spring element resiliently abuts a stop surface formed in the ring gear assembly.
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
B60R 1/062 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position
B60R 1/076 - Rear-view mirror arrangements mounted on vehicle exterior yieldable to excessive external force and provided with an indexed use position
A MIMO antenna system for a vehicle comprising first and second monopole antennas, which comprises first, second and third conductors. First and second conductors are electrically connected in parallel, and the third conductor is coupled to the first and second conductors. The first conductor has a height (H1) and thickness (t1) such that the H1/t1 ratio is within 5 to 45 to provide a resonant frequency at a first LTE frequency band. The second conductor has a height of 30%-60% H1 to provide a resonant frequency at a second LTE frequency band. The third conductor provides resonant frequencies at third and fourth LTE frequency bands, and having an electrical length such that the coupling level of the third conductor with respect to first and second conductors in the third and fourth LTE frequency bands is greater than 10 dB.
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H01Q 1/36 - Structural form of radiating elements, e.g. cone, spiral, umbrella
H01Q 1/42 - Housings not intimately mechanically associated with radiating elements, e.g. radome
H01Q 9/40 - Element having extended radiating surface
H01Q 9/42 - Resonant antennas with feed to end of elongated active element, e.g. unipole with folded element, the folded parts being spaced apart a small fraction of the operating wavelength
A gear selector assembly includes a shift gate including a plurality of gates, a gear selector movable between the plurality of gates and including a pawl, and a gate blocker positioned to restrictively interact with the pawl of the gear selector to selectively restrict movement of the gear selector through a first gate to a second gate. The gate blocker includes a biasing member configured to bias the gate blocker towards a nominal position. The gate blocker is configured to not restrictively interact with the pawl to allow the gear selector to move from the first gate to the second gate when the gate blocker is in the nominal position. Each gate of the shift gate is associated with a mode of operation of a vehicle.
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H03F 1/56 - Modifications of input or output impedances, not otherwise provided for
H03H 7/40 - Automatic matching of load impedance to source impedance
H03H 11/30 - Automatic matching of source impedance to load impedance
H03F 3/19 - High-frequency amplifiers, e.g. radio frequency amplifiers with semiconductor devices only
H01Q 5/335 - Individual or coupled radiating elements, each element being fed in an unspecified way using frequency dependent circuits or components, e.g. trap circuits or capacitors at the feed, e.g. for impedance matching
H01Q 1/36 - Structural form of radiating elements, e.g. cone, spiral, umbrella
A mirror base, a mirror housing rotatable to the mirror base between a non-driving retracted position and a driving protracted position around an axis (X), a non-metallic spring for providing an axial spring force between the mirror base and the mirror housing whose force differs at least between the non-driving retracted and the driving protracted positions; and a first guide portion for contacting a first contact area of the non-metallic spring, and a second guide portion for contacting a second contact area of the non-metallic spring. The guide portions are configured such that, during rotation of the mirror housing to the mirror base, at least one deformable portion of the non-metallic spring between the first and second contact areas is deformed in a direction (Y) substantially perpendicular to the mirror rotation axis (X).
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
B60R 1/06 - Rear-view mirror arrangements mounted on vehicle exterior
B60R 1/076 - Rear-view mirror arrangements mounted on vehicle exterior yieldable to excessive external force and provided with an indexed use position
B60R 1/08 - Rear-view mirror arrangements involving special optical features, e.g. avoiding blind spots
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
42 - Scientific, technological and industrial services, research and design
Goods & Services
Services of engineering of pieces, parts and components for vehicles; services of research, design and development of pieces, parts and components for vehicles; services of electronic development in the nature of development of technologies for the fabrication of circuits for automotive electronics, development of new electronic technology for others in the field of vehicles and development of software, in particular software for use in the field of automation
It comprises a base member (120), a mirror head, and a motor component (150) for rotating, through a drive means (215) comprising a gear wheel assembly (200), the mirror housing relative to the base member (120) between a mirror operative condition and a mirror folded condition, and vice versa. The gear wheel assembly (200) comprises a first and second gear wheels (210, 250) coupled to each other through first coupling means (216). The first gear wheel (210) engages a motor component (150) through a second coupling means (215) and the second gear wheel (250) in turn engages the base member (120) through a third coupling means (255). The first coupling means (216) allow the first and second gear wheels (210, 250) to be rotated together in one direction, and allow the first gear wheel (210) to be rotated relative to the second gear wheel (250) in the reverse direction.
B60R 1/06 - Rear-view mirror arrangements mounted on vehicle exterior
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Electric pumps for propulsion of fluids in vehicles Scientific, optical, signalling, measuring and control apparatus and instruments for use in vehicles, namely, laser measuring systems, laser devices for non-medical purposes, and radar apparatus, detectors, and object detectors for use on vehicles, back-up and proximity sensors and cameras for vehicle safety purposes, and navigation apparatus for vehicles in the nature of on-board computers; antennae, display systems for vehicles comprising flat panel display screen and liquid crystal displays; mechanical command cables for vehicles, namely, brake controllers, electrical cables for use in connections, and electric cables for trunk and door openers; electric locks, telematic systems with applications for vehicles comprising telematics apparatus, namely, wireless Internet devices which provide telematic services and have a cellular phone function; computer programs and electronically downloadable software for use in database management Lighting, heating, cooling, and ventilation apparatus for use in vehicles, namely, lights for vehicles, air conditioners for vehicles, climate control system for vehicles consisting of air conditioners and heaters, indicator and safety lights for use in vehicles, namely, back up lights for land vehicles, rear lights for vehicles, tail lights for land vehicles, lights for use in rear view mirrors Parts, components and accessories for automobiles, namely, roof racks, interior and exterior rear-view mirrors and structural parts therefor; sunscreens, namely, sun shields and visors for motor cars; signaling lights system, namely, turn signals for vehicles; windscreen washer and headlamp washer systems comprising windshield wiper blades and tanks for holding windshield washer fluids for land vehicles; plastic parts and components for vehicles, namely, automotive exterior and interior plastic extruded decorative and protective trim; manual and electric parking brake systems for vehicles; manual and electric gearshift change levers for vehicles; brake cables for vehicles
39.
Exterior rear view mirror assembly for a motor vehicle
An exterior rear view mirror assembly for a motor vehicle has a reflecting element, a clamping plate, a first adhesive element fixing the reflective element to the clamping plate, and a watertight illumination module. The watertight illumination module has a printed circuit board arranged within the watertight illumination module at an angle of 1 to 90 degrees relative to the clamping plate, at least one light emitting diode arranged on the printed circuit board, an inner reflective surface having a reflectivity coefficient of at least 30% and at least partially exposed to the light emitted by the at least one light emitting diode, and an outer portion with at least one hole with a sealing element engaged therein.
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60Q 1/00 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor
An automotive electrical wiring connector is disclosed for being inserted through a small opening. It comprises a body having at least one receiving portion for an electrical conductor end to be connected to a corresponding electrical conductor end, and a lid for covering the electrical conductor receiving portion. The lid is suitable to be in at least one operating position in which the lid is closed to the body and retaining the at least one electrical conductor therein while retaining the connector body through the small opening, and in at least one non-operating position in which the lid is open for allowing the at least one electrical conductor to be accessed and released.
A mirror device for motor vehicles is provided comprising a main housing and a light guide associated with a light source and attached to the main housing. The light guide extends in at least one portion through the main housing defining at least one housing adapted for receiving the light source. The main housing may comprise a cover and a case; and a housing body may be fitted between the light guide and the cover. The light source housing may be formed at any portion of the length of the light guide.
B60Q 1/34 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic for indicating change of drive direction
F21S 43/237 - Light guides characterised by the shape of the light guide rod-shaped
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
F21S 43/245 - Light guides characterised by the emission area emitting light from one or more of its major surfaces
F21S 43/247 - Light guides with a single light source being coupled into the light guide
Antenna system for a vehicle including a first directive antenna device and a second antenna device for a frequency band of operation, and a reflector plane, where the first directive antenna device includes a first ground plane, a first dielectric substrate, a first antenna group shorted to the first ground plane and having a first radiating conductor and a second radiating conductor, forming a first configuration and connected to the reflector plane by transmission lines electromagnetically coupled to the frequency band of operation, the reflector plane, disposed forming an angle with respect to the first dielectric substrate, the first directive antenna device radiating in a direction of radiation, and the second antenna device, connected to the first directive antenna device, radiating in an opposing direction to the first directive antenna device.
H01Q 9/28 - Conical, cylindrical, cage, strip, gauze or like elements having an extended radiating surface Elements comprising two conical surfaces having collinear axes and adjacent apices and fed by two-conductor transmission lines
H01Q 1/32 - Adaptation for use in or on road or rail vehicles
H01Q 21/29 - Combinations of different interacting antenna units for giving a desired directional characteristic
H01Q 25/00 - Antennas or antenna systems providing at least two radiating patterns
The invention relates to a method and system for inferring the behavior or state of the driver of a vehicle, use of the method and computer program for carrying out the method
The method comprises evaluating a series of descriptive functions of the conditions of interaction of the driver with the vehicle based at least on information from inertial sensors of an autonomous computation device, by comparing such evaluation with reference information associated with a behavior of the driver that is considered normal.
The system is suitable for implementing the method of the invention.
The use is for detecting behavioral changes of a driver.
The computer program is suitable for performing the steps of the method of the invention.
B60Q 1/00 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor
B60R 16/023 - Electric or fluid circuits specially adapted for vehicles and not otherwise provided forArrangement of elements of electric or fluid circuits specially adapted for vehicles and not otherwise provided for electric for transmission of signals between vehicle parts or subsystems
G08B 21/06 - Alarms for ensuring the safety of persons indicating a condition of sleep, e.g. anti-dozing alarms
G08B 21/02 - Alarms for ensuring the safety of persons
A mirror pane, a mirror pane carrying element, a cover, and a supporting device associated with the carrying element and the cover includes supporting elements formed on an inner surface of the cover extending perpendicular to an inner surface of the mirror pane. It may also include reinforcing ribs in portions of the mirror pane to be received into slots of the carrying element. A clipping device is provided for coupling the mirror pane to the carrying element which includes a number of flanges and a number of corresponding openings whose plane is mutually perpendicular.
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
A base member fixed to a vehicle, a housing with a rearview mirror, a motor component to rotate the rearview housing relative to the base, two sets of ramps independent of each other, capable of sliding on corresponding fixed ramps of the base element and first and second resilient elements. The ramps of the first and second sets have different inclinations and the resilient elements have different spring rates from one another, depending on whether the drive housing is manually or motor driven.
B60R 1/074 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for retracting the mirror arrangements to a non-use position alongside the vehicle
B60R 1/076 - Rear-view mirror arrangements mounted on vehicle exterior yieldable to excessive external force and provided with an indexed use position
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
An outer housing with a cover having a PVD coating; a lens; and an illumination device such as LEDs, light guides, light emitting surfaces and/or blinkers. The lens has a first area internal to the cover, and a second, transparent area extending to one side of the outer housing. The cover has a first cover element external to the lens and of a nature such that the illumination device is visible from the exterior when it is on and not visible from the exterior when it is off. The cover has a substantially opaque second cover element having an overlapping portion between the first area of the lens and the first cover element.
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60Q 1/50 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic for indicating other intentions or conditions, e.g. request for waiting or overtaking
47.
METHOD AND SYSTEM FOR INFERRING THE BEHAVIOUR OR STATE OF THE DRIVER OF A VEHICLE, USE METHOD AND COMPUTER PROGRAM FOR CARRYING OUT SAID METHOD
The method comprises the evaluation of a series of functions that describe the conditions according to which a driver interacts with a vehicle, based on at least information from inertial sensors of a stand-alone computer device, said evaluation being compared to reference information associated with normal driver behaviour. The system is adapted to carry out the method of the invention. The invention can be used to detect disturbances in the driver's behaviour. The computer program is adapted to carry out the steps of the method of the invention.
B60Q 1/34 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic for indicating change of drive direction
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
49.
SYSTEM AND METHOD FOR DETECTING A VITAL-RELATED SIGNAL PATTERN
System for detecting a vital-related signal pattern of a seated person (10) in a vehicle seat (11), the seat comprising a substantially horizontal base (16) and a substantially vertical backrest (15) having a front surface (12) accommodating the back of the seated person when in use, and a rear surface (19), the system further comprising: at least one Doppler radar (14) arranged behind the front surface of the backrest, in such a way that a main radiation lobe (18) of the emitter/receiver of the Doppler radar is focused towards the front surface of the backrest; and a module for detecting, based on a radar signal obtained by the Doppler radar, a signal pattern related to a vital of the seated person.
The present invention relates to a mirror support used in a door mirror vehicle which provides stability and distributes the forces in an uniform way due to two gear knees which are attached to the first ends of two perpendicular arms, a first arm and a second arm setting up a cross and also relates to a device to adjust the orientation of a mirror comprising the clutch mechanism.
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
Machines and machine tools; Motors and engines (except for land vehicles); Machine coupling and transmission components (except for land vehicles); Agricultural implements other than hand-operated; Incubators for eggs; Automatic vending machines.
52.
Rearview mirror device integrating a radio-frequency reception system
The invention relates to a rearview mirror device for vehicles incorporating a radio-frequency reception system. The rearview mirror device comprises: a light-reflective surface made of an electrically conductive material, and at least one planar conductive element lying on a plane substantially parallel to said reflective surface. The light-reflective surface and said conductive element are capacitively coupled and are used in combination for the reception of radio-frequency signals. The invention provides a rearview mirror with great simplicity and very-low cost.
The invention relates to a flush-mounted aircraft, UAV or missile antenna system, which is an integral part of the fuselage (3) of an aircraft, UAV or missile. The antenna system comprises a surface (3) made of a conductive material and a resonant recess (4) formed in said conducting surface, wherein said recess is conformed to provide a resonant behavior in a selected operating frequency, the antenna system further comprising a radiating element (2) located within said recess and a feeding element (5) within said recess coupled to said radiating element.
External rear-view mirror assembly comprising a housing (1), a circuit board (3) supporting a plurality of LEDs LED-1, LED-2, an opaque cover (5) arranged in front of the circuit board (3) and provided with a plurality of through holes (5a), said cover having a shape adapted to the front external surface (1a) of the rear-mirror (1), which comprises at least a prism (6) with a first surface (6a) in contact with at least a LED 4, and a second surface (6b) fitting within at least one of said holes (5a) and aligned with the front external surface (5b) of the cover (5), said second surface (6b) being a Fresnel lens adapted to direct the light coming from said LED 4 in a predetermined direction D.
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
The present invention is generally related to an antenna assembly, and in particular to a rear-view mirror antenna assembly for motor vehicles. The antenna assembly comprises a mirror attached to a casing (11) defining an outer perimeter (4), the assembly further comprising an antenna element (1) having a radiating element, wherein said radiating element is housed within said mirror and said casing and it is located substantially along said outer perimeter.
The present invention relates to a method and a system designed to determine an individual's state of attention from an individual's respiratory signal. The method of the invention comprises a first learning step, wherein the characteristics of an individual's normal state are determined by selecting a respiratory signal fragment that is considered to be normal according to a pre-established criterion, and a second analysis phase, wherein the individual's state of attention is determined from parameters extracted from the respiratory signal on the basis of some pre-defined rules and the individual's normal state previously characterised. The method of the invention is implemented in two embodiments. A first embodiment is based on the identification of pre-defined patterns in the respiratory signal and, in the second embodiment, an index indicative of the variability of the respiratory signal is defined.
The invention relates to a flush-mounted aircraft, UAV or missile antenna system, which is an integral part of the fuselage (3) of an aircraft, UAV or missile. The antenna system comprises a surface (3) made of a conductive material and a resonant recess (4) formed in said conducting surface, wherein said recess is conformed to provide a resonant behaviour in a selected operating frequency, the antenna system further comprising a radiating element (2) located within said recess and a feeding element (5) within said recess coupled to said radiating element.
12 - Land, air and water vehicles; parts of land vehicles
37 - Construction and mining; installation and repair services
Goods & Services
Agricultural implements other than hand-operated; except all goods included in this class used in the conveyor technology, water and mineral processing industries and in the waste recycling and disposal industries. Air pumps [vehicle accessories]; boat hooks. Building construction; repair; installation services except all goods included in this class used in the conveyor technology, water and mineral processing industries and in the waste recycling and disposal industries.
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
. . . . Parts, components and accessories for motor cars included in this class, except tyres; anti glare devices; internal and external rear view mirrors and components thereof; sun shades; direction indicators; windshield wiper and headlight wiper systems; liquid containers for vehicles; plastic parts and components for vehicles; valves; mechanisms and systems for vehicle seats and doors; manual and/or electric parking brake systems for vehicles; gear change levers and gear boxes for land vehicles; handbrake cable.
64.
Fixing device for position regulating mechanisms for external rear-view mirrors on motor vehicles
A fixing device for position regulating mechanisms for external rear-view mirrors for motor vehicles, applicable to external rear-view mirrors of the type which are comprised of a support (1), attached to which is a housing (6) which encases or is part of the aforementioned position regulating mechanism (2), to which a mirror support plate is affixed, it being possible to operate the same, manually or electrically, from the interior of the vehicle. The support (1) comprises elastic pressure exertion means (4) comprising a portion of the base (5) arranged on the support (1) and are provided with at least one tab (7), which pressure exertion means (4) are intended to withstand the pressure of the housing of the regulating mechanism when the latter is attached to the support by means of the fixing means, said pressure means being elastically distorted in such a way that they exert an effort force on the housing against the fixing means.
G02B 7/182 - Mountings, adjusting means, or light-tight connections, for optical elements for prismsMountings, adjusting means, or light-tight connections, for optical elements for mirrors for mirrors
A47G 1/24 - Appliances for adjusting pictures, mirrors, or the like, into a desired position, especially inclined
This invention relates generally to an improved system for connecting an integrated antenna to a car's ground point. The antenna matching system comprises a conductor (B) connected between an antenna element (A) and a first end of a feeder conductor (1) of a coaxial cable (C). A first end of the shielding conductor (2) of the coaxial cable is open, and a second end of the shielding conductor is adapted for its connection to a ground connection point (E) of a vehicle. The length of the conductor is selected to provide an inductive effect which substantially cancels the capacitive component of the antenna at the band of operation. The invention provides a matching system for the antenna of a motor vehicle, that allows to tune the antenna to the designed frequency independently of the selected ground point in the vehicle, so that a greater grade of freedom is obtained to design the antenna matching circuit.
The present invention is generally related to an antenna assembly, and in particular to a rear- view mirror antenna assembly for motor vehicles. The antenna assembly comprises a mirror attached to a casing (11) defining an outer perimeter (4), the assembly further comprising an antenna element (1) having a radiating element, wherein said radiating element is housed within said mirror and said casing and it is located substantially along said outer perimeter.
It comprises an opening (1) provided on a mirror housing and a camera or lightening device (3) removably attached in said mirror housing, said camera or lightening device (3) having a body (4) and a lens (5) facing said opening (1 ). Said opening (1) is provided in a removable cover (10) that forms a part of said mirror housing opposite to a mirror reflective element of the rearview mirror, said removable cover (10) having a cavity encircled by an edge (11) adapted to be coupled to a frame (12) of the mirror housing, wherein body positioning means and body fastening means are provided for positioning and removably fastening said camera or lightening device (3) in said cavity of said removable cover (10).
B60R 1/12 - Mirror assemblies combined with other articles, e.g. clocks
B60R 11/04 - Mounting of cameras operative during driveArrangement of controls thereof relative to the vehicle
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
B60R 11/00 - Arrangements for holding or mounting articles, not otherwise provided for
68.
Rearview mirror assembly of an automotive vehicle with a flashing device
The invention relates to a rearview mirror assembly of an automotive vehicle with a flashing device comprising a first opening for the rearview mirror and a second opening in which an outer module is coupled inwardly defining an elongated passage delimited between two walls, an inner wall and an outer wall or cover. It further comprises a double-sided printed-circuit board transverse to the passage, including two light emitters in a first one of its sides and another light emitter in the other side and dividing the elongated passage into two areas. The emitters of the first side projects light along a first of the two areas, this light directly exiting by an end area with desired horizontal and vertical angles, and the other emitter does so along a second one of the two areas, the light exiting through the cover.
B60Q 1/26 - Arrangement of optical signalling or lighting devices, the mounting or supporting thereof or circuits therefor the devices being primarily intended to indicate the vehicle, or parts thereof, or to give signals, to other traffic
69.
FIXING DEVICE FOR POSITION REGULATING MECHANISMS FOR EXTERNAL REAR-VIEW MIRRORS ON MOTOR VEHICLES
A fixing device for position regulating mechanisms for external rear-view mirrors for motor vehicles, applicable to external rear-view mirrors of the type which are comprised of a support (1), attached to which is a housing (6) which encases or is part of the aforementioned position regulating mechanism (2), to which a mirror support plate is affixed, it being possible to operate the same, manually or electrically, from the interior of the vehicle. The support (1) comprises elastic pressure exertion means (4) comprising a portion of the base (5) arranged on the support (1) and are provided with at least one tab (7), which pressure exertion means (4) are intended to withstand the pressure of the housing of the regulating mechanism when the latter is attached to the support by means of the fixing means, said pressure means being elastically distorted in such a way that they exert an effort force on the housing against the fixing means.
B60R 1/066 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by manually powered actuator for adjusting the mirror relative to its housing
B60R 1/072 - Rear-view mirror arrangements mounted on vehicle exterior with remote control for adjusting position by electrically powered actuator for adjusting the mirror relative to its housing
The invention relates to a vehicle exterior rear-view mirror comprising a casing or chassis (10) with a neck (11) to which an adaptor (20) is mated. The adaptor has an abutment surface (24) adapted to abut against a support sheet element (60) associated to an outer panel (70) of the vehicle. The support sheet element (60) has an opening (62) aligned with respective passages (12, 22) of the casing and the adaptor, respectively. A coupling stem (30) is installed through said passages (12, 22) with the possibility of rotation and axial movement. Anchor configurations (31) are formed at a lower end of the stem (30), said configurations engaging portions of the lower face of the support sheet element (60) adjacent to said opening (62). An elastic element (50) is arranged between the casing (10) and the stem (30) to push the stem (30) inwards the casing or chassis (10).
The capturing assembly (9) comprises a structure for supporting at least one active part of an electronic capturing device, such as a CCD or CMOS camera, and a light-deflecting element (6) coupled movably - or capable of being coupled movably - with at least one degree of freedom, to said support structure, and means for immobilization thereof. The rear-view mirror unit incorporates at least one rear-view mirror (11) and a case (12) carrying said mirror, which internally accommodates an image-capturing assembly (9) in a fixed manner, said casing (12) being provided with an opening (13) through which said light-deflecting element (6) projects or receives light from the exterior for the purposes of deflecting it towards the electronic capturing device (15).
B60R 1/00 - Optical viewing arrangementsReal-time viewing arrangements for drivers or passengers using optical image capturing systems, e.g. cameras or video systems specially adapted for use in or on vehicles
09 - Scientific and electric apparatus and instruments
12 - Land, air and water vehicles; parts of land vehicles
42 - Scientific, technological and industrial services, research and design
Goods & Services
Scientific, optical, measuring, signalling and checking (supervision) apparatus and instruments applicable to motor vehicles included in this class; aerials, vehicle display systems, speedometer cables, electric cables for vehicles; electric locks, telematic systems applicable to vehicles, electric pumps for the propulsion of fluids in vehicles, computer programs, electronically downloadable software, in particular computer programs for automotive use. Parts, components and accessoires for motor cars included in this class; anti-glare devices; internal and external rear view mirrors and components thereof; sun shades; direction indicators; windshield wiper and headlight wiper systems; pumps and liquid containers for vehicles; plastic parts and components for vehicles; valves and jets; mechanisms and systems for vehicle seats and doors; manual and/or electric parking brake systems for vehicles; gear change levers and gear boxes for land vehicles; handbrake cable. Engineering of parts, fittings and components for vehicles; research, development and design of parts, fittings and components for motor vehicles; electronic development and software development, in particular software for automotive use.
73.
Vehicle outside rear-view mirror assembly prepared for carrying an image detector device
An outside rear-view mirror for a vehicle, which is designed to support an image-detector device is disclosed. The assembly comprises a casing with a reflector fastening device and a detector fastening device configured to mount either a first reflector installed over the detector fastening device, hiding them, or a second reflector, smaller than the first one, leaving the detector fastening device clear and available for the installation of the image detector device in operating conditions.
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
42 - Scientific, technological and industrial services, research and design
Goods & Services
Scientific, optical, signalling, measuring and control
apparatus and instruments for use in vehicles included in
this class; antennae, display systems for vehicles,
mechanical drive cables for vehicles; electric cables for
vehicles; electric locks, telematic systems with
applications for vehicles, electric pumps for propulsion of
fluids in vehicles, computer programs, electronically
downloadable software, in particular computer programs for
use in the field of information. Lighting, heating, cooling, ventilation and water
distribution apparatus for use in vehicles, indicator and
safety lights for use in vehicles, in particular for their
fitting and use in rearview mirrors; deicing apparatus
integrated in vehicle windscreens. Parts, components and accessories for automobiles included
in this class; anti-glare devices; interior and exterior
rearview mirrors and components thereof; sunscreens;
direction indicators; windscreen washer and headlight washer
systems; pumps and tanks for liquids for vehicles; plastic
parts and components for vehicles; air duct tubes and caps;
conduit tubes, valves and jets; mechanisms and systems for
vehicle seats and doors; manual and/or electric parking
brake systems for vehicles; gear change levers and gearboxes
for land vehicles. Services of engineering of pieces, parts and components for
vehicles; services of research, design and development of
pieces, parts and components for vehicles; services of
electronic development and development of software, in
particular software for use in the field of automotion.
75.
Image acquisition unit with heating device for monitoring the exterior of a vehicle
The unit comprises: a casing (1) with a protected interior, a window (2) closed by a transparent element (3) and support means (4) to carry an optical system (5) facing said window (2); image detection means (6) accommodated in said casing (1), facing said optical system (5), an associated with connection means with the exterior for the supply and/or bidirectional signal exchange; and heating means to provide thermal energy to said transparent element (3), or to an adjacent zone thereto, aiming at avoiding lacking transparency problems, due to ambient and climatic factors.
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
12 - Land, air and water vehicles; parts of land vehicles
42 - Scientific, technological and industrial services, research and design
Goods & Services
Bonnet release cable, fuel filler cap release cable, pull-push cable systems, seat control cable, self-regulating cable, bi-directional automatic adjustment cable. Mechanically driven cables for vehicles, in particular accelerator cables, cables for gear box systems, speed change, starter cables. Scientific, optical, measuring, signalling and checking (supervision) apparatus and instruments applicable to motor vehicles included in this class; aerials, vehicle display systems, speedometer cables, electric cables for vehicles; electric locks, telematic systems applicable to vehicles, electric pumps for the propulsion of fluids in vehicles, computer programs, electronically downloadable software, in particular computer programs for automotive use. Apparatus for lighting, heating, refrigerating, drying, ventilation and distribution of water applicable to vehicles, flashing lights and safety lights for vehicles, in particular their assembly and use in rear view mirrors; de-frosters for vehicles. Parts, components and accessoires for motor cars included in this class; anti-glare devices; internal and external rear view mirrors and components thereof; sun shades; direction indicators; windshield wiper and headlight wiper systems; pumps and liquid containers for vehicles; plastic parts and components for vehicles; valves and jets; mechanisms and systems for vehicle seats and doors; manual and/or electric parking brake systems for vehicles; gear change levers and gear boxes for land vehicles; handbrake cable. Engineering of parts, fittings and components for vehicles; research, development and design of parts, fittings and components for motor vehicles; electronic development and software development, in particular software for automotive use.
03 - Cosmetics and toiletries; cleaning, bleaching, polishing and abrasive preparations
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
(1) Control cables and command cables for electrical and mechanical control of vehicle components; flexible transmissions and axles; electromechanical and plastic parts for vehicles namely window washing liquid tanks with or without liquid pump, surge tanks, brake fluid tanks, hydraulic steering fluid tanks, air ducts; rear-view mirrors, mechanisms for gear boxes; standard and automatic gearshift levers for vehicles, windshield wipers; automobile accessories and sunscreens for automobiles; parts of all the foregoing wares.
