An outdoor lamp assembly structure includes a base, a lamp cover, and a circuit board and a battery box installed on the base. The center of the circuit board is provided with an opening, the battery box is arranged in the opening, and a multiple of elastic pressing strips has a height higher than the top plate of the circuit board and extends obliquely outward from the top plate. During assembly, the lamp cover presses downwardly against the battery box to drive the plurality of elastic pressing strips to press downwardly against the circuit board to complete the positioning of the circuit board, so as to save the assembling time and cost.
F21V 19/00 - Fastening of light sources or lamp holders
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 17/12 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening by screwing
F21V 21/08 - Devices for easy attachment to a desired place
A waterproof electronic candle lamp includes a positioning cover installed in a hollow column, a swinging part swingingly installed on the positioning cover to simulate a swaying flame, an integrated circuit board (PCBA) for driving the swinging part to swing and projecting light onto the swinging part, and a waterproof hood which is a cover installed above the integrated circuit board, and a waterproof battery compartment with a battery installed inside, where the waterproof hood and the waterproof battery compartment can prevent rain from damaging the electronic components in the electronic candle lamp.
F21S 10/04 - Lighting devices or systems producing a varying lighting effect simulating flames
F21S 9/02 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 17/16 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening by deformation of parts of the lighting deviceSnap action mounting
F21V 31/00 - Gas-tight or water-tight arrangements
An outdoor light having a ground insert storage structure is disclosed. The outdoor light includes a hollow column and a ground insert. The hollow column has a transverse partition therein and a recess portion below the transverse partition. When in use, a positioning post of the ground insert is inserted upward, the ground insert is held in position by the transverse partition, and a spike of the ground insert is inserted into the ground. When not in use, the ground insert is reversed, the spike is inserted through the transverse partition and stored in the hollow column, and the positioning post is hidden in the recess portion.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21S 8/08 - Lighting devices intended for fixed installation with a standard
F21V 17/00 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages
F21V 21/08 - Devices for easy attachment to a desired place
An outdoor solar disc lamp includes a translucent lampshade mounted on a base, the translucent lampshade has a top translucent portion and a side translucent portion around the periphery of the top translucent portion, a solar panel is installed between the base and the translucent lampshade and above a battery, and a circular light panel surrounds the periphery of the battery and has a height lower than the solar panel, such that the circular light panel can emit light toward both the top translucent portion and the side translucent portion of the translucent lampshade.
F21S 8/08 - Lighting devices intended for fixed installation with a standard
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 21/08 - Devices for easy attachment to a desired place
F21V 31/00 - Gas-tight or water-tight arrangements
A solar lighting module for garden lamps detachably mounted onto the top end of a hollow lamp column of a garden lamp includes a top with an upper casing of a solar panel, at least one light emitting element and an integrated circuit board (PCBA) of a battery fixed in the upper casing, and a multiple of conductive springs installed on the integrated circuit board and passed upwardly through the top of the upper casing and a conductive terminal of the solar panel for an electrical connection to achieve the effect of quick assembly.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 17/16 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening by deformation of parts of the lighting deviceSnap action mounting
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21V 31/00 - Gas-tight or water-tight arrangements
An adjustable solar spotlight with various fixing methods includes a positioning stand for pivoting a lamp head, and a solar power supply module that can be connected to the lamp head through a pivot assembly, and the positioning stand can be used for plugging in the lamp head or fixing to the ground or hanging for positioning, and the solar power supply module can be deflected upwardly or downwardly relative to the lamp head and can be rotated using the pivot assembly as an axis in order to adjust angles towards different directions and improve the charging efficiency.
F21V 21/08 - Devices for easy attachment to a desired place
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
A multidirectionally adjustable outdoor solar lamp includes a main light installed with a battery, and a multiple of auxiliary lights pivotally connected to the outer periphery of the top of the main light by a pivot assembly, and each auxiliary light has a solar panel and can be rotated using the corresponding pivot assembly as an axis, or deflected upwards or downwards relative to the main light, in order to improve the charging efficiency and achieve a multi-angle lighting effect.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 21/08 - Devices for easy attachment to a desired place
F21V 19/02 - Fastening of light sources or lamp holders with provision for adjustment, e.g. for focusing
F21V 21/29 - Pivoted arms adjustable in more than one plane employing universal joints
F21L 4/04 - Electric lighting devices with self-contained electric batteries or cells characterised by provision of a light source housing portion adjustably fixed to the remainder of the device
F21V 21/28 - Pivoted arms adjustable in more than one plane
A multifunctional camping light includes a receptacle and at least two movable light bodies separately having an independent battery, and the two movable light bodies separately have a solar panel for providing an automatic charge or charging the receptacle. Unlike the function of the conventional camping lights available on the market, the movable light body of this disclosure can be assembled onto the receptacle in different ways to emit light or removed and used as a flashlight or a wall light to satisfy various different requirements of power bank and illumination for outdoor camping.
A garden light with a modular design for convenient packaging and transportation includes a first light set, and a second light set substantially in the same shape of the first light set and proportionally enlarged, and the two light sets include a hollow column, a solar lighting module and a base, and the hollow column of the second light set can be sheathed on the outer periphery of the hollow column of the first light set, such that two bases and two solar lighting modules can be accommodated in the inner periphery of the hollow column of the first light set to reduce the packaging and transportation costs.
F21V 3/04 - GlobesBowlsCover glasses characterised by materials, surface treatments or coatings
F21S 2/00 - Systems of lighting devices, not provided for in main groups or , e.g. of modular construction
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 21/08 - Devices for easy attachment to a desired place
A fan-shaped flashlight with adjustable lighting angle includes a connection seat disposed at the front end of a handle, a front-projection primary light installed at the front end of the connection seat, and two left-front and right-front projection secondary lights pivoted to two sides of the primary light respectively. The primary light and two secondary lights are arranged side-by-side on the same plane to project light within a fan-shaped angle, and the two secondary lights can be turned separately towards the outside relative to the primary light to adjust their lighting angle and position.
F21L 4/00 - Electric lighting devices with self-contained electric batteries or cells
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21L 4/02 - Electric lighting devices with self-contained electric batteries or cells characterised by provision of two or more light sources
F21S 9/02 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
11.
Multi-directional adjustable solar outdoor projection light
A multi-directional adjustable solar outdoor projection light capable of adjusting its lighting range, angle and sensing direction includes a support assembly, and a key light, and a solar power module which are pivoted to the top of the support assembly. Both sides of the key light are pivoted with a fill light capable of adjusting the angles of elevation and depression and the front and rear directions of a projected light relative to the key light, and the support assembly is pivoted is an axially rotatable sensor, thus improving the convenience of use and expanding the lighting range of the solar outdoor projection light.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 21/08 - Devices for easy attachment to a desired place
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
An outdoor solar ground light includes a primary light board and a plurality of secondary light boards installed in the outdoor solar ground light and electrically connected with each other without requiring the use of a conductive wire, and capable of emitting light around the top and the sides of the ground light simultaneously, and the ground light adopts a light emitting diode such as a white/warm white LED or a RGB LED provided for users to select their favorite color or change the color cyclically. Unlike the commercial available ground light, the present invention has the advantages of simple assembling, easy use, convenient transportation and packaging, and aesthetic merchandise appearance.
F21V 21/08 - Devices for easy attachment to a desired place
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 31/00 - Gas-tight or water-tight arrangements
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 8/08 - Lighting devices intended for fixed installation with a standard
A table lamp with double light-emitting lamp poles and a wireless charging board includes a base, a lamp arm erected from the top of the base, and two light-emitting lamp poles pivotally connected to the top of the lamp arm, and the two light-emitting lamp poles can be placed side by side with each other or spread out into a fan shape to adjust the lighting area, and a wireless charging board is arranged at the front of the base and provided for an external mobile device to be set obliquely for charging, and a display screen of the mobile device is facing towards the front to facilitate the viewing by users.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
H02J 50/00 - Circuit arrangements or systems for wireless supply or distribution of electric power
F21S 6/00 - Lighting devices intended to be free-standing
H02J 7/02 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries for charging batteries from AC mains by converters
An outdoor solar lamp assembly structure includes a base having a receiving slot, a translucent lamp cover covering on the top and outer periphery of the base, and a solar lighting module installed between the base and the translucent lamp cover, and a waterproof design is provided between the translucent lamp cover and the base, and the solar lighting module has a multiple of LED lamps, a solar panel, and a battery integrated and installed onto both front and back sides of a circuit board with a modular design which is conducive to assembly and maintenance.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 17/16 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening by deformation of parts of the lighting deviceSnap action mounting
A multi-purpose solar lamp includes an illumination lamp powered by solar power, a positioning board detachably fixed onto a wall or any plane, and a plug-in part pluggable into the ground. The positioning board and the plug-in part can be simultaneously or alternately combined to the back of the illumination lamp to allow users to conveniently fix the illumination lamp to the wall or a wooden or concrete ground or plug the plug-in part into the ground/soil as needed to achieve a multi-purpose effect.
F21S 9/03 - Lighting devices with a built-in power supplySystems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 21/02 - Wall, ceiling, or floor basesFixing pendants or arms to the bases
A double lampshade table lamp includes a base, a flexible pole vertically erected from the top of the base, and two lampshade assembly horizontally pivoted to the top of the pole and each having a light tube. The flexible pole can be bent to change the angle of the two lampshade assemblies, and the rear ends of the two lampshade assemblies respectively have bushings which are in a vertical staggered relation to each other and pivoted to the top of the pole, so that the two lampshade assemblies are situated at the same height and can be deflected to provide concentrated and focused light and a fan-shaped expansion of the lighting area.
An outdoor lamp capable of changing colors includes a support member, a lamp holder disposed on the support member, and an LED light module disposed in the lamp holder. The LED light module includes at least one PCBA (printed circuit board assembly) arrayed with a plurality of LED groups. Each of the LED groups is composed of at least one white/warm white LED and at least one RGB LED adjacent to each other. Each of the white/warm white LED and the RGB LED can emit light simultaneously or individually. When the RGB LED emits light to change colors, the luminous flux of the entire LED light module can be improved by the aid of the white/warm white LED, and a color gradient effect is generated.
F21V 31/00 - Gas-tight or water-tight arrangements
F21S 4/10 - Lighting devices or systems using a string or strip of light sources with light sources attached to loose electric cables, e.g. Christmas tree lights
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21V 9/40 - Elements for modifying spectral properties, polarisation or intensity of the light emitted, e.g. filters with provision for controlling spectral properties, e.g. colour, or intensity
H05B 33/08 - Circuit arrangements for operating electroluminescent light sources
OUTDOOR LIGHTING, NAMELY, PAVER LIGHTS; OUTDOOR LIGHTING FITTINGS, NAMELY, CEILING LIGHT FITTINGS; OUTDOOR LIGHTING FIXTURES, NAMELY, FIXTURES FOR INCANDESCENT LIGHT BULBS, LED BULBS, FLUORESCENT BULBS; LUMINAIRES FOR OUTDOOR LIGHTING, NAMELY, LED LUMINARIES, ELECTRIC LUMINARIES; LAMPS FOR OUTDOOR USE, NAMELY, DOOR LAMPS AND EXTERNAL WALL LAMPS; ELECTRICAL LAMPS FOR OUTDOOR LIGHTING, NAMELY, LED LAMPS, FLUORESCENT LAMPS AND ELECTRIC BULB LAMPS; GARDEN LIGHTINGS, NAMELY, ELECTRICAL BULB LIGHTS, LED LIGHTS, FLUORESCENT LIGHTS; GARDEN LIGHTS, NAMELY, LED LIGHTING FIXTURES FOR OUTDOOR LIGHTING APPLICATIONS, FLUORESCENT BULBS FOR OUTDOOR LIGHTING APPLICATIONS AND ELECTRICAL BULBS FOR OUTDOOR LIGHTING APPLICATIONS; SOLAR POWERED LAMPS; SOLAR LIGHT FIXTURES, NAMELY, INDOOR AND OUTDOOR SOLAR POWERED LIGHTING UNITS AND FIXTURES; SOLAR LAMPS, NAMELY, SOLAR POWERED LAMPS; SOLAR LAMP UNITS, NAMELY, SOLAR POWERED LAMPS; SOLAR CELL LIGHTING APPARATUS, NAMELY, INDOOR AND OUTDOOR SOLAR POWERED LIGHTING FIXTURES; FLOODLIGHTS; STROBOSCOPIC LAMPS, NAMELY, FLASHING STROBE LIGHT APPARATUS; STANDARD LAMPS; CEILING LIGHTS; RECESSED LIGHT FIXTURES; TABLE LAMPS; STRING OF LIGHTS, NAMELY, STRING LIGHTS FOR FESTIVE DECORATIONS; WALL LIGHTS; SPOT LIGHTS; CAMPING LANTERNS, NAMELY, ELECTRICAL LANTERNS; LANTERNS FOR LIGHTING; [ LIGHTING INSTALLATIONS FOR VEHICLES; LIGHTS FOR VEHICLES; BICYCLE LIGHTS; ] ELECTRIC NIGHT LIGHTS; OUTDOOR PORTABLE LIGHTING PRODUCTS, NAMELY, HEADLAMPS, POCKET SEARCHLIGHTS, FLASHLIGHTS
